Cosmetics Equipment

Used Orbis Machinery SBM-7272-170 1,269-Gallon Jacketed Horizontal Ball Mill – 150 HP, AR-400 Steel

Used- Orbis Machinery Model SBM-7272-170 jacketed horizontal ball mill with approximately 1,269-gallon (169.7-cu.-ft.) cylinder capacity, designed for a maximum media loading of approximately 25,380 lb. of steel media at 50% volume and dry-product loading of approximately 42.5 cu. ft. at 25% volume. The cylinder inner shell and heads are constructed of abrasion-resistant AR-400 steel, the jacket shell is SA-516 Grade 70 carbon steel, and the dry-discharge shroud and support stands are A-36 or better structural steel. The cylinder is rated for atmospheric pressure, and the jacket is rated for 15 PSIG at 250F. Equipped with a 150 HP C-face TEFC motor with brake, rated 460-volt, 3-phase, 60-Hz, and a hollow-bore C-face gear reducer providing a maximum cylinder speed of 22 RPM, reduced to 20 RPM through a variable-frequency drive. Includes a dry-product discharge shroud, cylinder indexing system with sensor and target disc, dual-flow 3-inch NPT rotary union, siphon-tube assembly, shaft seals, two 8-15/16-inch-bore pillow-block bearings, drive-end and idler-end support stands, a 20" x 20" inch loading hatch with tool-free quick-opening handles, 14" x 16" inspection opening with bolt-on cover, approximately 10" x 10" bottom discharge with drilled flange for a customer-supplied valve, vibrator mounts, 2-1/2" NPT jacket-feed connection, 1-1/4" NPT jacket-return connection, and stainless-steel jacket piping, fittings, unions and flexible hose assemblies. Approximate overall dimensions are 247-7/8" long x 96 inches wide x 154-1/16" high, with an approximate machine weight of 34,000 lb.

Used Hemraj PSD 02 Stainless Steel Spray Dryer – 22 Lb/Hr Water Evaporation, Two-Fluid Nozzle Atomization

Used Hemraj PSD 02 Stainless Steel Spray Dryer 22 Lb/Hr Water Evaporation, Two-Fluid Nozzle Atomization. 316 stainless steel contact parts. 304 stainless steel non-contact parts. 36" diameter x 69" straight side chamber size. Two-fluid compressed air nozzle atomizer 10 kg/hour (approximately 22 lbs/hour) water evaporation capacity. 14.5 kg/hour (approximately 32 lbs/hour) feed rate w/ 30% dry solids feed. 4.5 kg/hour (approximately 10 lbs/hour) powder rate. Ambient- 260 degrees C (500 degrees F) inlet temperature. 95-100 degrees C (203-212 degrees F) outlet temperature. 30-40 degrees C (86-104 degrees F) ambient temperature. 760mm Hg atmospheric pressure. 50% relative humidity. Blown down" powder collection method. Electric air heater heat source. 3/50/440V electric motor. Built 2014. Previously used for organic biopesticides.

Used Makwell MWM-350L 350-Liter Vacuum Emulsifying Mixer – 316L SS Homogenizer with Steam Generator & Auxiliary Tanks

Used- Makwell Machinery Vacuum Emulsifying Mixer, MWM-350L. 316L stainless steel contact parts. 350 liter design capacity, 300 liter maximum working capacity, 110 liter minimum working capacity. Components include emulsifying pot, oil pot, and water pot. Features hydraulic lifting and tilting system, upper homogenizer/sweep wall stirrer, vacuum pump, and temperature controller. With platform, 72 kW steam generator, 500 liter storage tank, 1,000 liter/hour diaphragm pump, and transfer pump. Built 2023.

MFR: Makwell

Used Sweco Vibro-Energy 60" Diameter Stainless Steel Vibratory Separator configured with two decks for three product separations. Unit is driven by a 5 HP motor rated for 460 volts, 3 phase operation...

Used- Sweco Vibro-Energy 60" Diameter Stainless Steel Vibratory Separator configured with two decks for three product separations. Unit is driven by a 5 HP motor rated for 460 volts, 3 phase operation at 1,200 RPM. Separator features multiple discharge ports for directing separated product streams and a removable top lid. Screens are not included. Overall dimensions are approximately 5' long x 5' wide x 6' high. This circular vibratory separator is designed for screening, sizing, classifying, scalping, and separating material into multiple fractions. Possible applications include screening, sizing, classification, scalping, and separation of dry powders, granules, particles, and other free-flowing process materials.

MFR: Sweco

Used Sweco Vibro-Energy 60" Diameter Stainless Steel Vibratory Separator. Configured with two decks for three product separations. Unit is driven by a 5 HP motor rated for 460 volts, 3 phase operatio...

Used- Sweco Vibro-Energy 60" Diameter Stainless Steel Vibratory Separator. Configured with two decks for three product separations. Unit is driven by a 5 HP motor rated for 460 volts, 3 phase operation at 1,200 RPM. Separator features multiple discharge ports for directing separated product streams and a removable top lid. Screens are not included. Overall dimensions are approximately 5' long x 5' wide x 6' high. This circular vibratory separator is designed for screening, sizing, classifying, scalping, and separating material into multiple fractions. Possible applications include screening, sizing, classification, scalping, and separation of dry powders, granules, particles, and other free-flowing process materials.

MFR: Sweco

Used 2020 Stokes 900-513R Custom 23-Station Rotary Tablet Press – Die-Twisting Ejection, Under 2 Pressing Hours

Used- 2020 Stokes Custom Rotary Tablet Press, Model 900-513R with 23-station turret and less than 2 hours of actual pressing operation.. This machine features a custom die-twisting design that rotates the dies to help break sticking during tablet ejection, providing a specialized solution for products prone to sticking during the ejection process. Equipped with 23-station rotary turret, product hopper and feed system, compression and adjustment controls, machine guarding, and floor-mounted drive assembly. Electrical requirements are 480 volts, 60 Hz, 3 phase, 10 amps. Serial # 032036, Manufactured in 2020 and showing exceptionally low pressing use, this custom Stokes press combines the established 900-513 platform with a specialized 23-station turret and die-twisting ejection arrangement. Possible applications include pharmaceutical, nutraceutical, vitamin, supplement, confectionery, chemical, and specialty tablet production, particularly products where sticking during tablet ejection is a concern.

MFR: Stokes

Unused Netzsch LME 100 K Horizontal Agitated Bead Mill – Continuous Fine Grinding & Dispersion System

Unused Netzsch LME 100 K Horizontal Agitated Bead Mill Continuous Fine Grinding & Dispersion System. Designed for continuous fine grinding and dispersion of liquid and paste-type products. Features a horizontal grinding chamber with jacket for process temperature control, high-horsepower main drive, product feed pump, and associated piping and instrumentation. Suitable for fine particle size reduction and dispersion applications including coatings, inks, chemicals, and other industrial products. Serial #2402851, built 2010.

MFR: Netzsch

Unused 2010 NETZSCH LME 100 K Industrial Bead Mill – Fine Grinding & High-Shear Dispersion

Unused 2010 NETZSCH LME 100 K Industrial Bead Mill Fine Grinding & High-Shear Dispersion. Designed for continuous fine grinding and dispersion of liquid and paste-type products. Features a horizontal grinding chamber with jacket for process temperature control, high-horsepower main drive, product feed pump, and associated piping and instrumentation. Suitable for fine particle size reduction and dispersion applications including coatings, inks, chemicals, and other industrial products. Serial #2402852, built 2010.

MFR: Netzsch

Used 2018 BUCHI B-290 Mini Spray Dryer with B-295 Inert Loop – Laboratory Spray Drying System for Aqueous & Organic Solvent Applications

Used- Buchi Mini Spray Dryer, Model B-290. With glass drying chamber and atomizer. Includes Buchi B-295 Inert Loop for spray drying with organic solvents under an inert gas atmosphere, with oxygen and pressure control to prevent explosive conditions. B-295 features cooling capacity of 800 W at -10 C and minimum outlet temperature of -20 C. Built 2018.

MFR: Buchi

Unused 304 Stainless Steel Centrifugal Spray Drying System

Unused 304 Stainless Steel Spray Dryer. 15 liters/hour maximum evaporation rate. Gas powered. Centrifugal spraying nozzle. Mechanical transmission. 150-200 degrees C (302-392 degrees F) (auto controlled) inlet temperature. 80-100 degrees C (176-212 degrees F) outlet temperature. 2,500 RPM atomizer speed. 60mm spray disk diameter. = 95% powder recovery. 80mm Aluminum Silicate insulating layer. 3-5% finished product moisture content. Mounted on frame with dust collector. Stainless steel Dust collector: 640mm diameter x 1,000mm straight side length x 300mm vertical body length. 108mm bottom outlet diameter. (3) electromagnetic valves. (10) cloth bags.

Used Carrier Vibrating Equipment Model FTD/AD2460S Stainless Steel Vibratory Fluid Bed Dryer System

Used Carrier Vibrating Equipment Model FTD/AD2460S stainless steel vibratory fluid bed dryer, Serial #27191, built 2009. System includes control panel, Stelter & Brinck direct-fired gas air heater, flame control panel, blower, rotary valve, additional blower, MAC cyclone, rotary valve, additional blower and sock filter. Possible applications include continuous drying of suitable powders, granules, crystalline solids, filter cakes, fibrous materials and other bulk products requiring controlled fluid bed drying.

MFR: Carrier

Used Carrier Vibrating Equipment Model FTDII/AD2490S Stainless Steel Vibratory Fluid Bed Dryer System

Used Carrier Vibrating Equipment Model FTDII/AD2490S stainless steel vibratory fluid bed dryer, Serial #27748, built 2012. System includes an inclined discharge screw conveyor approximately 12" diameter x 12' long with magnet, Kongslide blower, control panel, Stelter & Brinck direct-fired gas air heater, flame control panel, MAC cyclone, rotary valve, assorted blowers and sock filter. Possible applications include continuous drying and cooling of suitable powders, granules, crystalline solids, filter cakes, fibrous materials and other bulk products.

MFR: Carrier