Cosmetics Equipment

Used Groen TDH-40 Table Top Kettle – 40 Quart, Gas-Heated, Steam Jacketed

Used- Groen Table Top Kettle, Model TDH-40, 40 Quart Capacity, Stainless Steel. Approximate 16-1/2" diameter x 14" deep. Self-contained steam jacketed unit with natural gas heated steam source contained within unit. Input rated 52,000 btu / hr. 2/3 bottom jacket rate 50 psi at 300 degrees F. Manual tilting with pour lip. Mounted on a base. National Board# 12100, Serial# 1988-10.

MFR: Groen

Commercial Tabletop Kettle for Sale – Groen TDH-40, Natural Gas Heated

Used- Groen Model TDH-40 Table Top Kettle, 40 Quart Capacity, Stainless Steel. Approximate 16-1/2" diameter x 14" deep. Self-contained steam jacketed unit with natural gas heated steam source contained within unit. Input rated 52,000 btu / hr. 2/3 bottom jacket rate 50 psi at 300 degrees F. Manual tilting with pour lip. Mounted on a base. National Board# 13816, Serial# 1989-4. 1/60/110 Volt.

MFR: Groen

Commercial Stainless Steel Groen TDH-40 Kettle – 40 Qt, Self-Contained Steam

Used- Groen Stainless Steel Table Top Kettle, Model TDH/40-SP, 40 Quart Capacity. Approximate 16-1/2" diameter x 14" deep. Self-contained steam jacketed unit with natural gas heated steam source contained within unit. Input rated 52,000 btu / hr. 2/3 bottom jacket rate 50 psi at 300 degrees F. Manual tilting with pour lip. Mounted on a base. National Board# 32385, Serial# 32385. 1/60/110 Volt.

MFR: Groen

Used Patterson-Kelley 10 Cu. Ft. 304 Stainless Steel Twin Shell V-Blender – 135 Lb./Cu. Ft. Density Rating

Used- Twin Shell (V-Blender) - Patterson Kelly 10 Cubic Foot 304 Stainless Steel. Rated maximum material density 135 lbs./cu. Ft. Has (2) 18" top charge ports and a 8" bottom discharge with a butterfly valve. Interior has milled finish. Unit is direct driven by approximately 2HP right angle geardrive with an electric brake. Has Dodge pillow block bearings. Mounted on carbon steel stand giving 48" from bottom valve to floor. Overall dimensions 91" long X 30.5" wide X 101" tall.

MFR: Patterson Kelley

Used Fitzpatrick Comminutor FitzMill, Model DASO- 6 – Stainless Steel

Used- Fitzpatrick Comminutor Fitzmill, Model DASO-6, Stainless Steel. (16) 1" wide x 5/16" thick x 3-3/4" long fixed knives. Approximately 6" diameter x 14" long Cutting chamber. Has gravity feed throat with pan, and bottom screen discharge with 33-1/2" discharge height. Driven by a 10hp, 3/60/208-230/460 volt, 1760 rpm motor. Control panel. Mounted on a carbon steel base with (4) legs and casters. Serial# 7815.

Unused LACT Hydraulic Pump Unit | 200 GPM @ 45 PSI | Viking Q4127A Pump | 10 HP Motor | 3” Stainless Piping | Static Mixer, Valves & Meter | Skid-Mounted | Built 2021

Unused- LACT Hydraulic Pump Unit. 200 GPM flowrate at 45 PSI discharge pressure. 3" stainless steel piping. Includes Viking Q4127A Pump, driven by a 10hp 3/60/460v 1800rpm motor. static mixer, valves, and meter. Skid mounted. Built 2021.

Used IKA Works Colloid Mill MK2000/5 – 10 HP High-Shear Inline Mill, 10,000 RPM

Used- IKA Works Colloid Mill, Model MK2000/5. 304 stainless steel construction. 10 GPM max. flow rate. 2" inlet, 1.5" outlet. 3" rotor diameter. 10,000 RPM mill speed. Adjustable shear rate and radial gap. 23 m/s tip speed. Driven by a 10hp 3/60/230-460V 3515 RPM motor.

MFR: IKA Works

IKA Works DR2000/5 High Shear Disperser 3-Stage Stainless Steel

Used IKA Works High Shear Dispersing Machine DISPAX-REACTOR, Type DR2000/5. Three-stage high shear inline disperser. Flow rate maximum 10 GPM, depending on product. Sanitary clamp, 2" inlet, 1.5" outlet, made of 316 stainless steel. Thermal jacket rated 36 psi (2.5 bar) at 120 degrees C. Driven by 10 HP, 230/460 Volt, 3 Phase, 60 Hz, 3600 rpm, Inverter duty, TEFC, Explosion Proof motor. Serial # 3778-20.

MFR: IKA Works

Used Premier Mill ESD/V-10/5 Stainless Steel Media Mill – 10-Liter Grinding Chamber, 10 HP Drive

Used- Premier Mill Corp. Media Mill. Model ESD/V-10/5, Stainless steel. Manufactured in May 2000. 208 V power with a 10 HP drive motor and a 5 HP pump motor. In Premier's ESD nomenclature, the "10" designates the grinding chamber volume of 10 liters (2.64 U.S. gallons) rather than a batch size, since the machine is a continuous-flow mill and has no fixed batch capacity. Throughput and batch size depend on the product viscosity and the particle fineness required, with the mill paired to a feed or recirculation tank 10100 gallons for lab and pilot work, and 50300 gallons for production recirculation. Floor mounted construction and configured for high-shear mixing and dispersion with recirculation through the product loop, suitable for paints, inks, coatings, adhesives, chemicals, and specialty product formulations in laboratory, pilot, and production service

MFR: Premier

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

Dr. Pharm GZPS-83 Bi-Layer Tablet Press – 83 Station High Output Machine

Used 2020 Dr. Pharm automatic high-speed double-sided / bi-layer tablet press, model GZPS-83. Unit has 83 stations and is set up for BB tooling; tooling is not included. Rated output is approximately 79,600796,000 tablets/hr depending on application, with an operating rotation speed range of 880 RPM. Maximum tablet diameter is 13 mm, maximum irregular tablet length is 16 mm, maximum fill depth is 16 mm, and punch diameter is 19 mm. Unit is powered by an approximately 11 kW main motor and includes HMI interface, dust collector, original manufacturer's warranty, and onsite support. Possible applications and suitable products include high-speed single-layer and bi-layer tablet production for compatible pharmaceutical, nutraceutical, vitamin, supplement, and other compressed tablet products.

Used Zanchetta (IMA) T Tote Bin

Used- Zanchetta (IMA) T Tote Bin, approximately 10.5 cubic feet (300 liter) (79.2 Gallons), Stainless Steel. 40" diameter x 4" straight side x 24" cone bottom. 15 top opening, 6" discharge. Mounted on a stainless steel frame.

MFR: IMA