Cosmetics Equipment
Stock No.:
10211226Used Fitzpatrick Fitzmill Model D Comminuting Machine – 3 HP, Stainless Contact, Gravity Fed
Used- Fitzpatrick Fitzmill Comminuting Machine, Model D. Stainless steel material in contact with product. 3HP. Unit is gravity fed with slanted inlet throat with an opening of 4.75"H X 5.75"W. 6" wide milling chamber with a 10" diameter rotor. Mill Rotor: 16 pivoting blades, plain bars 1" wide X 0.25" thick. Bottom discharge hopper with 7.75" flange, 42.25" above base elevation. Portable carbon steel stand with a base area of 42" X 46". 3HP two-speed v-belt drive, 1750 RPM TEFC motor. Supply power: 115/230V, 60Hz, single phase AC. Bottom sizing screens not included.
MFR: Fitzpatrick
Stock No.:
48417002Used Sturtevant Sample Grinder – Model 2-10, 100-400 lbs/hr Capacity, Carbon Steel
Used- Sturtevant Sample Grinder, Model 2-10, Carbon Steel. Approximate capacity 100 to 400 pounds per hour, product size 20 to 100 mesh. (1) 10" diameter grinding disc, driven by a 3 hp, 3/60/208-230/460 volt, 1750 rpm motor. Hinged door with (1) 10" diameter stationary grinding disc. Approximate top inlet 6-1/4" x 2-1/4", bottom outlet 6-3/4" x 4-3/8". Mounted on a carbon steel frame. Serial #1170.
MFR: Sturtevant
Stock No.:
50510001Used Scott Turbon 1XEV-1 Mixer & Lee Industries 1-Gallon Reactor – 3 HP, Stainless Steel
Used- Scott Turbon Mixer, Model 1XEV-1, Stainless Steel. Approximate 9-3/4" long mixing shaft. Driven by a 3 hp, 3/60/230/460 volt, 3500 rpm motor. Air operated raise. Includes Lee Industries Reactor, Approximate 1 Gallon (4 Liters), Model 4LDBT. Internal 316L Stainless steel rated 45 psi at -20 to 325 degrees F, vacuum designed. 304 Stainless steel jacket rated 50 psi at -20 to 325 degrees F. Dished top head with 3" tri-clamp openings (missing clamp), (5) 3/4", (5) Bolts missing off top head. Vessel openings side: 1-1/2", 3/4", bottom: 1-1/2" with valve. Reactor Serial # C5087C. Built 1997. Includes control panel with A/B controller. Mounted on stainless steel frame with casters. Serial # 4060-1A.
MFR: Scott Turbon
Stock No.:
52710004Pre-Owned Paul O Abbe Jar Rolling Mill – 3” x 60” Rolls, 86-258 RPM
Used- Paul O Abbe Single Tier Jar Rolling Mill Enclosure, Model JRM. 3" Diameter x 60" wide rolls. Roll speed: 86 to 258 rpm, set rolls at 169 rpm. Approximate 3/4hp, 3/60/230/460 volt, motor. Sound attenuated enclosure. Mounted on fork-liftable base. Serial# A35796. Capable of being two-tier. ***THIS MACHINE IS OFFERED FOR RENTAL. ASK AN AARON EQUIPMENT PROFESSIONAL FOR MORE INFORMATION***
MFR: Paul O Abbe
Stock No.:
54425002Used Charles Ross HSD-3 High Speed Disperser 3 Gallon Lab Mixer
Used Charles Ross & Son High Speed Disperser, Model HSD-3. Designed for laboratory and pilot-scale mixing and dispersion. Approximate 3-gallon working capacity, vertical shaft batch type, handling viscosities up to approximately 50,000 cP. 5-1/4" Diameter disperser blade. Driven by approximately 3 HP inverter-duty TEFC motor, 230/460V, 3 phase, 50/60 Hz, with variable speed drive. Wetted parts are 304 stainless steel with painted carbon steel frame and V-belt drive. Features air/oil hydraulic lift with adjustable head. Bench or floor mounted, open vessel design. Suitable for paints, coatings, inks, adhesives, and chemical applications.
MFR: Ross Industries
Stock No.:
114534753.5" Readco Twin Screw Continuous Processor
Used- 3.5" Readco Twin Screw Continuous Processor, model 3 1/2 HVY DU. Heavy duty design, stainless steel product contact surfaces, jacketed barrel rated 150 psi at 600 f, cored shafts with rotary units, driven by 50 hp, 460 volt motor, machine currently set up with cantilevered screws with adjustable gap ribbon die, with spare set of screw splines set up for end bearing housing, on base. Mfg. 1987.
MFR: Readco
Stock No.:
44604001Used J.H. Day Plow Type Turbulent Mixer – 304 Stainless Steel, 3.5 Cu. Ft. | High-Performance Industrial Mixer with Side-Entering Pinned Disc Mill
Used- J.H. Day Plow Type Turbulent Mixer, 304 Stainless Steel. 3.5 Cubic feet total capacity. Non-jacketed chamber approximately 20" diameter x 22" straight side. 3" Diameter shaft with blades and end scrapers. Driven by a 7.5 hp, 3/60/230/460 volt, 1800 rpm Sterling variable Speed-trol motor. Includes a side entering pinned disc mill, driven by a 10 hp, 3/60/230/460 volt, 3490 rpm motor. Top access door with a charge port, 8" center bottom outlet with a manually operated plug valve. Includes a control panel. Mounted on a carbon steel frame.
MFR: J H Day
Stock No.:
11059397Used ROSS HSM-430SC Inline High Shear Mixer with SLIM Powder Injection System – 30 HP Explosion Proof Mixing Platform
Used ROSS HSM-430SC Inline High Shear Mixer with SLIM Powder Injection System 30 HP Explosion Proof Mixing Platform. Solids (powder) / Liquid Injection Manifold (SLIM). Equipped with 3" Liquid inlet, 2.5" Powder Inlet and 3" Liquid outlet. Driven by 30 HP, 208-230/460 volt, 1760 rpm Explosion Proof (XP) Motors. Powder / Liquid Dispersing / Mixing System. The Liquid stream enters the mixer and immediately encounters the powder (solids) at the high shear zone (rotor and stator assembly). The resulting dispersion is expelled centrifugally through the stator opening at high velocity.
MFR: Ross Industries
Stock No.:
49307005Used Great Western Manufacturing Type TB, Model 611/4 Tru-Balance Screener
Used- Great Western Manufacturing Tru-Balance Screener, Type TB, 30" Diameter, Model 611/4 (QA30), 304 Stainless Steel. Approximate 500 pounds per minute with wheat flour. Approximate 30" diameter, (4) sieves. Approximate net sieving area 15 square feet. Driven by a 1.5 HP, 3/60/230/460 volt, 1160 rpm motor. 5" top opening, bottom openings: 5", 4". Mounted on a painted carbon steel frame. Serial# 3882. Built 1999.
MFR: BF Gump
Stock No.:
50388107Used IKA Works Dispax Reactor – High Shear Inline Disperser, Model DR 2000/10, 30 HP
Used- IKA Works Dispax Reactor High Shear Inline Disperser, Model DR 2000/10, Stainless Steel. Nominal flow rate 35 gallons per minute (8,000 l/h), nominal tip speed 4500 feet per minute. Driven by a 30hp, 3/60/230/460 volt, 3525 rpm motor. 2" Inlet & outlet. Unit mounted on a base. Part# P015742. Serial # 2599-12.
MFR: IKA Works
Stock No.:
51454001Used Bowen BLSA Laboratory Spray Dryer – 316 Stainless | 15–80 lb/hr | 1000°F Inlet | Atomizer | Complete System
Used- Bowen Engineering BLSA Laboratory Spray Dryer. 316 stainless steel. 30" (770 mm) diameter x 28" (720 mm) straight side x 30" (770 mm) coned bottom. Approximate evaporation rate 15-80 pounds (6.8-26.3 kgs) an hour. Atomizer. Air requirements 100 psi (6.66 bar), Inlet temperature range to 1000 degree F (537.77 degree C), side access door. Digital control panel mounted on unit. Mounted on stainless steel legs. Includes cyclone, collection jar, gas heater and blower, piping and additional infrastructure. Previous used in a Nutraceutical application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible
MFR: Bowen
Stock No.:
51708014Macon 30" Diameter Single Deck Stainless Steel Screener
Used- Macon Screener, 30" Diameter, 304 Stainless Steel. Single deck, 2 separation. No screen. Top clamp-on cover with 8" center inlet. Driven by a approximate 1/2hp, 3/60/460 volt, 1140 rpm motor. Mounted on a painted carbon steel base.
MFR: Macon
