Cosmetics Equipment
Stock No.:
54687101Used Carbon steel double ribbon blender has 80 cu. ft. of working capacity. Unit has an open top and a 4” end discharge. Driven by a gear-reduced 25 hp, 1760/132 rpm motor that requires 220/440 vac, ...
Used-Carbon steel double ribbon blender has 80 cu. ft. of working capacity. Unit has an open top and a 4” end discharge. Driven by a gear-reduced 25 hp, 1760/132 rpm motor that requires 220/440 vac, 3 ph electricity. Outer ribbon is 40” in diameter with a 4” diameter shaft. Mixing chamber is 40” w x 116” l x 46” h for a total volume of about 110 cu. ft. Overall height is about 95”. Last used mixing 6200 lbs of product.
Stock No.:
54620001Used Jenbacher JGS-416 1.127 MW Natural Gas Generator Package – 4,160V Enclosed Power Generation System
Used Jenbacher JGS-416 1.127 MW Natural Gas Generator Package 4,160V Enclosed Power Generation System. Rated 1.127 MW. Approximately 96% generator efficiency. Includes fully enclosed transportable weatherproof building and switchgear. 1800 RPM. 1573 bhp motor. 60hz/4160V. Built 2011. Reported 72,000 hours.
MFR: Jenbacher
Stock No.:
44430016Used Generac 1MW Open Skid Generator | 1130 kW Mitsubishi Diesel Standby Power Unit
Used- Generac 1MW Open Skid Generator, Model 575RSL4044. Rated for stand-by duty. Rated at 1130 kW, 277/480 volts (re-connectable), 1699 amps. 1600 amp breaker (adjustable). Driven by a 1449hp Mitsubishi S12H-PTA engine, Serial# 30119. 312.5 original hours. Serial# WA522385-1299, Built 1999.
MFR: Generac
Stock No.:
11059402Used DCI 11,500-Gallon 304 Stainless Steel Jacketed Tank – 150 PSI Sanitary Food Process Vessel
Used DCI 11,500-Gallon 304 Stainless Steel Jacketed Tank 150 PSI Sanitary Food Process Vessel. Approximately 11' diameter x 16' height, 22'6'' overall height. Jacket rated 150 psi from -20 degrees F to 350 degrees F. Dish top and bottom with a 6'' center bottom outlet. Serial #JS8081, built 2021. Previously used in sanitary food applications.
MFR: DCI
Stock No.:
54687140Used 1188.77 gal (4500 L) Beer Barrel tank, serial # AKL16-A-10005 built by ABC- Kinglai Co, Ltd for Glacier Tanks LLC. Built 05/2016. This stainless steel tank is about 59" in diameter with a 81" st...
Used-1188.77 gal (4500 L) Beer Barrel tank, serial # AKL16-A-10005 built by ABC- Kinglai Co, Ltd for Glacier Tanks LLC. Built 05/2016. This stainless steel tank is about 59" in diameter with a 81" straight side and 12" dished heads. Volume 4.5 m3. Design pressure shell 0.1 MPa, jacket 0.15 Mpa. Design temperature 98 degrees C. jacket on the side of tank only. Dished heads. Two top lift lugs. Tank has four legs. Top has one 3" tri clamp nozzle and one 1.25" tri clamp nozzle. Bottom nozzles one 1.25" tri clamp and one 1.5" tri clamp. Side nozzles one 16" x 13" elliptical hinged lid manway, five 1.25" tri clamp nozzles for jackets, two 1.25" tri clamp, two .75" tri clamp nozzles, and one .75" coupling. Overall dimensions70" x 70" x 122" tall.
Stock No.:
54472002Used Sonoma Stainless 11,960 Gallon Wine Tank | Glycol Jacketed & Insulated Stainless Vessel
Used- Sonoma Stainless Wine Tank, 11,960 gallon. Stainless steel. Glycol jacketed. Exterior foam insulated. 236" overall height x 127" diameter. 34" high legs/tank stand. Previously used for wine storage.
Stock No.:
44582030Used Screw Conveyor – 12" Diameter x 6' Long, Stainless Steel | Efficient Bulk Material Handling for Industrial Applications
Used- Screw Conveyor, 12" diameter x 6' long, stainless steel. "U" Trough style with cover and motor.
MFR: Unknown
Stock No.:
53993001Bonnot Co. 12" Extruder – 40 HP Jacketed Grooved Barrel Industrial Screw Extruder
Used- The Bonnot Co. 12" Extruder. 12" Diameter x 47" long screw. Jacketed grooved barrel section. Driven by an approximate 40 hp, 3/60/230/460 volt, 1775 rpm motor. Infeed 18" x 18". Centerline height approximately 41-1/2". Mounted on painted carbon steel frame with 4 legs. Serial # B3269. S. O. B6669. Date 8-16-93. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Bonnot
Stock No.:
53993002Bonnot Co. 12" Industrial Extruder – 40 HP Jacketed Barrel Screw Extruder (2000)
Used- Bonnot Co. 12" Industrial Extruder 40 HP Jacketed Barrel Screw Extruder (2000). 12" Diameter x 47" long screw. Jacketed grooved barrel section. Driven by an approximate 40 hp, 3/60/230/460 volt, 1775 rpm motor. Infeed 18" x 18". Centerline height approximately 41-1/2". Mounted on painted carbon steel frame with 4 legs. Serial # B3269. S. O. B6669. Date 8-16-93. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Bonnot
Stock No.:
54437003Used Vivtek LSD-H1500F/T Spray Dryer | Lab Scale Spray Drying System 1500 ml/hr
Used- Vivtek Instruments Spray Dryer, Model LSD-H1500T. 1500 ml H2O/hour evaporation rate. Two-fluid nozzle w/ needle, 1/1.5mm atomizer. 12" diameter x 16" length drying chamber. 5" diameter x 20" length cyclone. 80-280 degrees C (176-536 degrees F.) inlet gas temp., 50-120 degrees C (120-248 degrees F.) outlet gas temp. 3,000 W heater. 200 cfm airflow. 50/60 hZ, 230V. Built 2022.
