Contract Pharmaceutical Equipment

Used Carbon steel double ribbon blender has 50 cu. ft. of working capacity. Unit has a closed top and a 12" w x 17" l end discharge. Driven by a gear-reduced 15 hp, 1160/31 rpm motor that requires 22...

Used-Carbon steel double ribbon blender has 50 cu. ft. of working capacity. Unit has a closed top and a 12" w x 17" l end discharge. Driven by a gear-reduced 15 hp, 1160/31 rpm motor that requires 220/440 vac, 3 ph electricity. Outer ribbon diameter is 36” with a 4” diameter shaft. Mixing chamber is 38.5” w x 90” l x 40” h for a total volume of 72 cu. ft.

Used C.E. Raymond #73412 Roller Mill – 350 HP Motor, Industrial Grinding

Used- C.E. Raymond #73412 Roller Mill. Directly driven by a 350 hp, 3/60/4160V, 585 rpm motor. Unit is equipped with a gear and intermediate shaft, horizontal shaft assembly with pinion, external oil lubrication system, vertical shaft, mill bottom assembly with oil reservoir, spider assembly with caps, plow support assembly with (4) four plow bodies and (4) plow tips, (4) four oil journal assemblies each with grinding roll, mill base with port liners and grinding ring, mill side and system fan directly driven by a 150 hp, 3/60/4000V, 1175 rpm motor. Less mill base air housing assembly, less dual feeder assemblies and less whizzer separator assembly, also missing the gearbox. Unit has low operating hours and is in excellent condition. This machine is commonly used in the production of Gypsum Board and Drywall.

MFR: CE Raymond

Used Phlauer / A&J Mixing Modular Paddle Mixer – 74 Cu. Ft., 30 HP, 304 Stainless Steel

Used- Phlauer / A&J Mixing Modular Paddle Mixer, Model AJSP 486-6 SPSS. Approximate 74 cubic feet, 304 stainless steel. Non-jacketed trough approximate 48" wide x 78" long x 44" deep. 5" Diameter shaft with (16) 13-3/4" x 6-3/4" x 3/8" thick paddles welded on 2" diameter posts. Driven by a 22kW (30 hp), 3/60/230/460 volt, 1770 rpm gear motor, 75.69 to 1 ratio, final rpm 23. Openings top: 12", 2-3/4", side: (4) 30" x 15-1/2" hinged inspection doors. 14" x 8" End bottom discharge with pneumatic discharge valve. Includes outboard roller bearings, air seals, and a control panel. Mounted on (4) stainless steel legs. Serial# 99111.

MFR: Phlauer

Used Littleford KM-3000-D 74 Cu Ft 304 Stainless Steel Jacketed Plow Mixer

Used Littleford Plow Mixer, Model KM-3000-D, 304 Stainless Steel, Approximate 74 Cubic Feet Working Capacity. Approximate 44" diameter x 116" long chamber. Drum rated Atmospheric, 304 stainless steel jacket rated 75 psi at 32 to 320 degrees F. Approximate 5" diameter shaft with (12) welded on paddles. Driven by a 100 Hp 3/60/460/1780 rpm motor thru Falk gearbox, 13.86 to 1 ratio. Provision for (10) Tulip style choppers each should be driven by a 15 HP motor (5) additional provision. Top openings: 1-1/2", 3", 10", 16". (2) 24" x 16" side access doors. 16" Side bottom outlet. Serial# 41961-4442, Built 1993. Possible applications include high-intensity powder blending, dry ingredient mixing, granulation, particle dispersion and processing of compatible specialty chemicals, mineral powders, fertilizers, construction materials, polymer additives, pigments, detergents and other suitable bulk solid formulations.

MFR: Littleford

2800L (740 gal) Mueller "f" tank. 316 stainless

Used- 2800L (740 gal) Mueller "f" tank. 316 stainless inner shell, Dual 304 jackets, 2" insulation, 304 stainless cladding. Tank MAWP - 60psi @ 350F Jacket MAW - 100psi @ 350F The tank bottom actuated valve was updated/replaced by mueller in 1993 with Saunders 70v61-315-p4 tbv Have drawings from mueller. Includes lightnin vektor VKS37 agitator. Serial# R0037042201. Does not have motor.

MFR: Mueller Corp

PulsaFeeder 7440-S-AE Metering Pump – 5 HP, 230/460V, XP Motor

Used- PulsaFeeder Diaphragm Metering Pump, Model 7440-S-AE, series 40, nominally rated 8.55 gph at 330 psi, with 5 hp, 230/460 volt XP motor, Serial # 9560471-2.

Sistersville Tank Works Incorporated Shell and Tube Heat Exchanger

Used- Sistersville Tank Works Incorporated Shell and Tube Heat Exchanger. Approximately 745 square foot 316L stainless steel 20" diameter X 20' face to face length. 316L SS shell side rated 150 PSI @ 20 to 320 degrees F. (190) 3/4" 316L SS tubes rated 150 PSI @ 20 to 305 degrees F. 3" Process nozzles with 1" vent and drain. 3" service nozzles. NB# 3879, S/N: 06- 290. Built 2007. Weight 6150#. Missing one head

MFR: Sisterville Tank Works

Reportedly Unused Mid-South Maintenance 745.7 Sq Ft 304 Stainless Steel Shell and Tube Heat Exchanger, 2016

Reportedly Unused Mid-South Maintenance horizontal shell-and-tube heat exchanger, 745.7 sqft, 304 stainless steel construction. Shell measures 20-inch OD 183-3/4 inches long, with 3/8-inch wall thickness. Includes (248) straight 304 stainless steel tubes, 3/4-inch OD 0.065-inch wall, with welded 304 stainless steel tube sheets. Shell-side MAWP 300 PSI at 500F; tube-side MAWP 100 PSI at 500F. Includes flanged stainless steel end chambers with elliptical heads, (2) 6-inch Class 150 inlet/outlet connections, (3) 2-inch Class 300 connections, and two welded saddle supports. Built to ASME Section VIII, Division 1. Serial number 316-0007, National Board number 2157. Manufactured 2016. s/n 316-0007

MFR: Mid South Maintenance

Used J.H. Day Stainless Steel Jacketed Mixtruder | 75 Gallon Working Capacity | 30+25 HP Hydraulics

Used J.H. Day Stainless Steel Jacketed Mixtruder | 75 Gallon Working Capacity | 30+25 HP Hydraulics. With dispersion blades and extruder screw discharge. Internal pressure: Atmospheric @ 353F shell is 7/16" thick. Jacket pressure: 125 psi @ 353F jacket is 3/8" thick. Mixer Dimensions: 32" x 32" x 25" high, approximate total capacity is 110 gallons. Extruder screw is 8" diameter driven by a hydraulic motor, and hydraulic tilt discharge are both powered by 30 HP 230/460 volts Vickers Hydraulic pumping system. Mixer Blades driven by a 25 hp US. varidrive motor, 220/440 volt. 31 to 125 RPM to chain and sprocket to give you approximately 15 to 62.5 RPM output speed on the blades. NB #1117, SN 86065. Built 1971.

MFR: J H Day

Used Lee 75-Gallon Tilt-Back Dual Motion Agitator – 316 SS, XP Motor, Industrial Mixer

Used- Lee Floor Mounted 75 Gallon Dual Motion Tilt Back Agitator Assembly, Model 9M, 316 Stainless Steel. Approximate 30" wide anchor style agitator. Inner bars 11" x 1.5" wide x 5/16" thick. Outer bars 11.5" x 1.5" x 5/16" thick. Driven by a 2hp, 3/60/230/460 volt, 1725 rpm XP motor, thru dodge gearbox. Has tilt mounted stainless steel frame. Serial# 17378-2.

MFR: Lee Ind

Unused Komarek DH-300 Heavy-Duty Briquetting Press – 2–10 Tons/Hr, 75-Ton Roll Force, 75 HP

Unused Komarek Heavy-Duty Two-Roll Briquetting Press, Model DH-300. 75 tons of roll separating force. Rated throughput of 2-10 tons/hour depending on briquette size and density. Roll dimensions: 13'' - 20.5'' diameter x 4'' - 13'' width. Driven by a 75 HP motor. Gravity fed. Possible applications include briquetting and compacting operations for carbon based fuels, inorganic chemicals, mineral ores, industrial by-products, and metal powders. Serial# 051740-1-1, built 2022.

MFR: Komarek Greaves

Used Eirich RV-15 Mixer – 750L, 1200 kg Capacity, 75 HP Tool, 304 Stainless, Industrial Intensive Mixer

Used- Eirich Mixer, Model RV-15. 304 stainless steel product contact surfaces. Approximately 750 liter bowl. 1200 kg max capacity. 75 hp mixing tool. 10 hp pan motor. On board lubrication system with 2 hp pump. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Eirich