Contract Pharmaceutical Equipment

Quincy Industrial Compressed Air Mist Eliminator Separator

Used Quincy Mist Eliminator Air Treatment Unit. Industrial compressed-air vessel, identified as Unit 3, is a vertical steel separator/filter housing designed for inline air-treatment service within a multi-compressor system. The unit features a bolted top cover with multiple service ports, heavy-duty welded legs, and integrated inlet/outlet connections sized for high-flow compressed-air applications. Internal rated 150 psi at -20 to 300 degrees F. Mounted on (3) legs. National Board & Serial# 890142. Built 2022.

Used Quincy Compressor Control Panel & QHD635 Air Dryer System

Used-Quincy QHD635 twin-tower heatless desiccant air dryer system, manufactured in 2022, complete with integrated control cubicle and pre-/post-filtration assemblies. The unit includes two vertical desiccant vessels with top-mounted pressure gauges and manifolded switching valves. The air dryer (serial APF267952) is rated for inlet pressures 411 bar, allowable inlet temperature 150C, and max outlet temperature 55C, and is built in Belgium by International Compressor Distribution N.V. The control cubicle (type 1900 5003 32 ED05, serial 3002383-33) operates on 24V control, supports 115-230V 2-phase supply, and is designed for 50/60 Hz operation with a 2 A rated current. The assembly is skid-mounted.

Quincy Twin-Receiver Compressor Package with Refrigerated Dryer

Used Quincy Compressor system consists of a factory-built control cubicle (Type 1900 5003 32 ED05, S/N 3002383-27) operating on 24V control voltage with dual-frequency capability (50/60 Hz) and a 2-phase 115230V supply rated at 2 amps. The control panel manages a twin-receiver compressed air setup and includes integrated monitoring and protection circuitry with a kA-rated short-circuit tolerance. Paired with the compressor is a Quincy refrigerated air dryer, Model QHD635 (S/N APF267602, year 2022), designed for inlet pressures of 411 bar and temperatures from 150C, with a maximum outlet temperature of 55C.

Used Quincy Compressor System with QHD635 Refrigerated Air Dryer

Used Quincy 3 compressed-air module consists of a dual-receiver tank assembly integrated with a factory-built Quincy control cubicle (Type 1900 5003 32 ED05, S/N 3002383-26), designed for 24V control voltage and dual-frequency operation at 50/60 Hz. The electrical system operates on a 2-phase 115230V supply with a 2-amp rated load, and incorporates protection and monitoring circuitry in a sealed control enclosure. The unit is paired with a Quincy refrigerated air dryer, Model QHD635 (S/N APF267527, 2022), rated for 411 bar inlet pressure, 150C allowable inlet temperature, and a maximum 55C outlet temperature.

Unused Ruhrpumpen ZW 18×14×17(A) Split Case Pump | 8,000 GPM | 150 HP | Industrial High-Flow Pump

Unused Ruhrpumpen Split Case Pump, Size ZW 18X14X17(A). Rated 8,000 GPM at 1.5 bar (22 PSI). 1 stage. Driven by a 150 HP, 990 RPM, 3/50/400V motor in a TEFC enclosure. Built 2024.

Used Kaeser TCH35 Refrigerated Compressed Air Dryer | 124 CFM | High-Pressure In

Used Kaeser TCH35 Refrigerated Compressed Air Dryer | 124 CFM | High-Pressure Industrial Air Drying. Rated 124 cfm at 230 max psig, 37 to 115 degrees F ambient temperature. R-134a refrigerant, max charge 1.85lbs, max working pressure 300psig. 115v/1/60Hz requirements. Serial# 1378, built 2013.

MFR: Kaiser

Used CompAir CNC125 Refrigerated Compressed Air Dryer | 125 SCFM | Industrial Co

Used CompAir CNC125 Refrigerated Compressed Air Dryer | 125 SCFM | Industrial Continuous-Duty Moisture Removal. Unit is rated for 125 SCFM (215 m3/h) airflow capacity at 100 PSIG (6.9 bar) 100 degree F ambient temperature. R-134a refrigerant 21oz (0.80kg) charge. Equipped with factory-installed controls and safety devices. Serial# RC2J4125AB1A2NA11010.

MFR: CompAir

Energy Fabrication 30 MMBTU Frac Heating Unit Propane Fired

Used Energy Fabrication Model TFH30P indirect-fired frac heating unit with a heating capacity of 30 MMBTU per hour. Unit is propane fired and identified by serial number EFH30P-5000-274. Possible applications include heating water, brine, fracturing fluids, process liquids, and other suitable industrial or oilfield fluids.

Used Funk Series Diesel Powered Double Pump with John Deere 6.8 Liter Engine

Used John Deere Funk 28000 Series diesel-powered double-pump package featuring a Funk SPEC C28102XB pump, serial number YZD282C163495, powered by a John Deere Model 6068HF485 6.8-liter industrial diesel engine. The unit was last operated with a trailer-mounted frac heater system. Possible applications include diesel-powered liquid circulation and transfer for trailer-mounted frac heater systems and similar industrial pumping operations.

Used Ellerwerk Basket Centrifuge – Stainless Steel, 8.8 Liter Capacity

Used- Ellerwerk Basket Centrifuge. Stainless steel construction. 2300 RPM. 8.8 liter (approx. 2.3 gallon) capacity. 50 degrees C (122 degrees F) max. operating temperature. 6 bar operating pressure. 15mm impeller diameter. Built 1986.

MFR: Ellerwerk

Used Belmer Winkle Press Dewatering Belt Press VPK 2S | High-Capacity Sludge Dewatering System

Used Belmer Winkle Press Dewatering Belt Press VPK 2S | High-Capacity Sludge Dewatering System. Belt working width measures 1500 mm (48") x 15500 mm (50 4") long. 2 x 21 spray nozzles. Water pressure 6 bar (90 PSI), 18 x 188 mm (7.33") Dia driving rolls. Belt speed 2.61 m/min (85"/min), Stainless steel frame. Unit features hydraulically controlled belt tracking device. Includes (1) 4 kW / 6 HP, 400V powerpack feeder belt drive. 1.7 kW / 2.3 hp, 460V main press belt drive with variable speed control (1) Sludge pump, (1) Polymer station (1) Control panel. Overall dimensions 5600 mm (182") long x 2534 mm (823") width (transport width) x 2250 mm (73") high, Weight empty 9.5 tonnes. Operating weight 10.5 tonnes. Previously used in a WWT application. New 2022. Our freight specialists can assist with freight and customs documentation to ensure smooth transition.

Bollegraaf HBC120 Horizontal Channel Baler – Recycling Baler 90KW

Used 2013 Bollegraaf Recycling Machinery horizontal channel baler, model HBC120/90KW, serial number 03402-0010-02. Unit produces bales approximately 43.3" wide x 28.3" high with adjustable bale length and includes wire feed frames and control panel. Manufacturer technical data for the HBC120 lists a 90 kW drive, approximately 119.7 tonnes of baling force, an approximately 63" wide feed opening, and published throughput of approximately 16.2 tonnes/hr at 30 kg/m3 bulk density, 25 tonnes/hr at 50 kg/m3, and up to 47 tonnes/hr at 100 kg/m3. Published specifications also indicate bale weights up to approximately 1,000 kg and a cycle time of approximately 19 seconds excluding wire tying. Actual throughput and bale weight depend on material type, bulk density, feed consistency, and operating conditions. Possible applications and suitable products include high-capacity baling and compaction of compatible paper, cardboard, plastics, and other recyclable material streams.