Contract Packaging Equipment

Used 1000 liter single use bioreactor, Made by Thermo Scientific

Used- 1000 liter single use bioreactor, Made by Thermo Scientific, Stainless Steel. Open top, flat bottom shell. 38" diameter x 50" straight side. Dimple Jacket.Operating Temperature Range: Ambient to 40 +/- 0.1 Degrees C (104+/-0.2 DegreesF). 0.5psi Bag Pressure. Includes AB series A Drive, Brother 3 phase induction motor, 1/2hp 3/60/208-230/460v 1720rpm, 15:1 Ratio. Mounted on Stainless Steel Frame. Serial# H10289-04.

MFR: Thermo Scientific

Used Wenzhou ACE Machinery 1,000-Liter 316L Sanitary Mixing Tank – Jacketed, Insulated & Load Cell Equipped

Lightly-Used- Wenzhou ACE Machinery 1,000-liter (264 Gallon) (1 cubic meter) stainless steel sanitary mixing tank with 316L stainless steel product-contact surfaces and 304 stainless steel exterior. The unit was upgraded to meet U.S. safety standards by a licensed PE contractor. The inner tank features a mirror-polished finish, 5 mm wall thickness, and a dimple jacket, with 2 mm outer cladding and PU foam insulation. Vessel is equipped with a 4 kW agitator operating at 36 RPM with Teflon scraper and a control box for mixing speed control. The inner vessel has a design pressure range of -0.1 MPa to 0.2 MPa, while the jacket has a design pressure of 0.35 MPa. Tank features sanitary clamps on each inlet orifice, a 3" bottom valve, load-cell connections, and one spare single-face mechanical seal. Additional equipment includes electrical upgrades, required safety equipment, condenser, controller, Rice Lake load cells, relief valve, and rotary shaft cage protection. Electrical requirements are 480 V, 3-phase, 60 Hz. Possible applications and suitable products include sanitary liquid mixing and processing of liquid products requiring agitation, heating, cooling, vacuum, pressure processing, or weight-based measurement.

Shandong HG Machinery 10,000 Liter Fermentation Tank

Unused - Shandong HG Machinery 10,000 Liter Fermentation Tank, 2641 Gallon (85 BBL), 304 Stainless Steel, Vertical. Approximately 78.74" diameter x 137.79" straight side. Dished top, 60 degree cone bottom. Jacket approximately 14m2, test pressure 0.2MPa (29 PSI). Openings top: 102mm (4"), 89mm (3.5"), 51mm (2"), Side: 540mm x 440mm Manhole (21.25" x 17.3"), 38mm (1.5"), 19mm (.75"). 1-1/2" Side cone outlet, 818mm (32.2") discharge height. 1-1/2" Center bottom outlet, approximate 60mm (2.36") discharge height. Mounted on (4) legs. Approximate 87" x 87" x 236" tall, 3400 lb

IN STOCK and NEW- Paul O Abbe Model RB-265 Ribbon Blender

NEW & IN STOCK- Paul O. Abbe Model RB-265 Ribbon Blender. In -Stock .265 Cubic Foot working capacity. 289 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 63" wide x 130" long x 67.8" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 75 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 26 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 4.7" wide x 27.6" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 36.2" long. Approximately 4" discharge height. Approximate weight 14,960 pounds. Approximate overall dimensions: 81" wide x 206.5" long x 94.8" high. Controls are available upon request.

MFR: Paul O Abbe

Used Horizontal 316L Stainless Steel Tate Metalworks Tank, approx. 26,700 gallon capacity

Used- Horizontal 316L Stainless Steel Tate Metalworks Tank, approx. 26,700 gallon capacity. 10 diameter X 44 long straight side; Top Fittings: (2) 30" manways, (1) 1", (1) 2", (2) 3", (3) 4"; Has one bottom end 4" outlet; Dished ends; Ends certified by Trinity Industries; Mounted on saddles; 12-6" shipping height. Previously stored Sulfuric Acid.

Used National Board Certified Precision Stainless 103 Liter / 27.2 Gallon Jacketed Tank

National Board Certified Precision Stainless 103 Liter / 27.2 Gallon Jacketed Tank, 316L Stainless Steel, Vertical. Approximate 20" diameter x 26" straight side. Dished removable top head, dished bottom head. 304L Stainless steel dimple jacket, rated 100psi / FV at -20 to 250 degrees F. Internal rated 45psi / FV at -20 to 250 degrees F. Openings: (5) 3", (1) 1-1/2". (2) 1", 1-1/2" Center bottom outlet with approximately 8-10" discharge height. (4) internal baffles. Mounted on (4) legs with casters. Serial# 8080-5, National Board# 5375. Used as Freeze / Thaw Vessel.

Used 270 Cu. Ft. Stainless Steel Double Ribbon Blender – 75 HP, Center Discharge

Used- Stainless Steel Double Ribbon Blender. 270 Cubic foot capacity. Non-jacketed trough approximately 144" L x 60" W x 66" D and has a center bottom discharge. Ribbon is chain driven by a Reliance 75 HP 1785 RPM 460-volt 3-phase motor through a gearbox (presently missing). Serial# 70-202.

MFR: Unknown

Used Sauer WP6208 BasSeal Helium Compressor | 1000 m³/h | 53.8 Barg | 270 HP | 2023

Used Sauer WP6208 BasSeal Helium Compressor | 1000 m/h | 53.8 Barg | 270 HP | 2023. 6 cylinder, 2 stage, 1000 cubic meters per hour volumetric flow rate, max. working pressure 53.8 barg. Discharge relief valve set pressure 56.5 barg, water cooled. Complete with controls, fully automated with HMI screen and mounted on a steel skid. 270 HP, 460/3/60, 307 FLA. Serial number 113730, new in 2023. Previously used for testing a NASA system. Reported to have 47.9 run hours.

Used Thermax TAC L5 E1 Vapor Absorption Chiller – 276 Ton, 970 kW, 2019 Build, 200 Hours

Used- Thermax Vapor Absorption Chiller, Model TAC L5 E1. 276 ton cooling capacity; 970 kW; 166.5 cubic meters/hour chilled water circuit flowrate; 276 cubic meters/hour cooling water circuit flowrate; 106 cubic meters/hour hot water circuit flowrate. Components included: VFD's, HMI and sensors. OAD: 15.5' L x 7.0' W x 10.5' H. 3/60/575V. Built 2019. Reported to have 200 hours. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Unused 8,000 Liter 304 Stainless Steel Double Ribbon Blender – 75 HP Industrial Batch Mixer

Unused Double Ribbon Blender. 8,000 liter/approximately 282 cubic feet capacity. 304 stainless steel construction. Unit is equipped with a center bottom outlet and driven by a 75 HP, 1,140 RPM, 3 phase, 60 Hz, 575V motor through a 47.94:1 reduction gearbox. Blender is mounted on a carbon steel support frame. Built 2023.

MFR: Unknown

Industrial Stainless Steel Plow Mixer/Dryer – Used Hagen & Rinau HSM 800

Used- Hagen & Rinau Unimix Plow Mixer/Dryer, Type HSM 800. Material of construction is 304 stainless steel (1.4541). 34" (900 mm) diameter x 51" (1300 mm) straight side mixing/drying chamber. Total capacity is 29 cubic feet (822 liter), net working capacity is 8.83-20.3 cubic feet (250-575 liter). Jacketed, inside rated for 45 psi (3 bar) at 212 deg F (100 deg C). 2 end scrapers and 4 Becker plows welded on a shaft. One (1) removable end. (1) 9.75" x 23.4" (250 mm x 600 mm) outlet. Driven via a gearbox by a 195 hp/130 kw, 1280 rpm, 400 volt/50 cycle/3 ph motor. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Hagen & Rinau-Unimix

Used Caldwell tanks 2900 gallon stainless steel vertical tank. Serial # 5658-3. Tank is 90" in diameter with a 90" straight side height. 12" dome top has a 24" bolted man cover, (2) 2" threaded fit...

Used-Caldwell tanks 2900 gallon stainless steel vertical tank. Serial # 5658-3. Tank is 90" in diameter with a 90" straight side height. 12" dome top has a 24" bolted man cover, (2) 2" threaded fittings, an 1" threaded fitting, a 3" flanged fitting and an 8" flanged fitting. Top also has a 40" tall saftey railing around the tank. The 12" dish bottom has a 2" center discharge. Tank also has a 2" fill from bottom tube running from the top. Tank sits on 4 I-beam legs for a total height of 164". Good condition.