Chemical Equipment
Stock No.:
54522001Unused CST Carbon Steel Storage Silo – 5,300 Cubic Foot Capacity
Unused CST Carbon Steel Storage Silo 5,300 Cubic Foot Capacity. 13 11" diameter x 45 5" height. Fluidized flow pattern. 60 PCF product compacted bulk density. Cone bottom, flat top. Side-bottom manway. On (4) legs. Built 2021. Reported to be unused.
MFR: CST
Stock No.:
54522002Unused 5,300 Cu. Ft. CST Bulk Storage Silo with Fluidized Flow Cone Bottom Design
Unused 5,300 Cu. Ft. CST Bulk Storage Silo with Fluidized Flow Cone Bottom Design. 13 11" diameter x 45 5" height. Fluidized flow pattern. 60 PCF product compacted bulk density. Cone bottom, flat top. Side-bottom manway. On (4) legs. Built 2021. Reported to be unused.
MFR: CST
Stock No.:
54687127Used Waukesha Cherry Burrell estimated 549 sq. ft. surface area stainless steel plate heat exchange. Model T60CH-AL. Built 10-26-01 by Thermaline, Inc., Auburn, WA. Serial number 5000. The heat excha...
Used-Waukesha Cherry Burrell estimated 549 sq. ft. surface area stainless steel plate heat exchange. Model T60CH-AL. Built 10-26-01 by Thermaline, Inc., Auburn, WA. Serial number 5000. The heat exchanger has a maximum working pressure of 150 psi, (2) 4" sanitary tri-clamp inlets and outlets on the process side,(2) 4"Lap joint flanges inlets and outlets on the service side. Size of unit 30" wide x 75" tall x 70" long.
MFR: Waukesha
Stock No.:
52393003Used Imperial Steel 550 Gallon Reactor – 304 Stainless Steel, 68 PSI
Used- Imperial Steel Reactor, Approximately 550 Gallon Capacity, 304 Stainless Steel. Approximately 54" diameter x 52" straight side. Dished top and bottom. Internal rated 68 psi at -20 to 200 degrees F. Carbon steel plate and bar jacket rated 60 psi at -20 to 200 degrees F. Openings top: 20" diameter manway with cover, 6", (4) 2", (2) 1". 2" Center bottom outlet with valve. Mounted on (4) carbon steel legs. Serial# S.T-Y00-054, National Board# 2076.
MFR: Imperial Steel
Stock No.:
53264016Kinetics Modular Systems 550 Gallon Reactor
Used- Kinetics Modular Systems 550 Gallon Reactor, 316 Stainless Steel, Vertical. Dish top and bottom, 48'' diameter x 64'' straight side. Full Vacuum. Vessel mawp: 50 psi @ 300 deg.f, vessel rated full vacuum. Sanitary interior polish. Center discharge: 2 tri-clamp with valve. 18'' manway, with clamp down lid & gasket. With level gauge, insulated. Two top cip spray balls and temperature probe. Tank is on four stainless steel legs with pads. Serial# 666-100/21. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
Stock No.:
54687040Used US Filter Co. Auto-Jet model 400 self cleaning (rotating) vertical pressure leaf filter. The pressure leaf filter has (24) 48" diameter leaves with a 550 sq. ft. filtering area that has 304 stai...
Used-US Filter Co. Auto-Jet model 400 self cleaning (rotating) vertical pressure leaf filter. The pressure leaf filter has (24) 48" diameter leaves with a 550 sq. ft. filtering area that has 304 stainless steel contacts and has a working pressure rating of 50 psi @ -5° F. The vessel has a volume of 725 gallons and a sludge capacity of 34 cu.ft. The shell measures 54" diameter x 57" long, has a 3" diameter flange inlet, a 3" diameter flange outlet, and a 10" diameter sludge outlet. Shell tested as 304 stainless.
MFR: US Filter
Stock No.:
52384002Used Horizontal 55,500 Gallon Pressure Tank, Manufactured by HUB Technologies
Used- Horizontal 55,500-gallon pressure tank manufactured by HUB Technologies, constructed of 316L stainless steel with dished heads, an end-mounted swing arm manway cover, and supported on (2) saddles. Overall dimensions are approximately 68' long x 14' tall x 13' wide with an empty weight of approximately 33,000 lbs. Shell rated for 25 psi internal pressure and minus 0.75 psi vacuum at 125 degrees F. Suitable for bulk liquid storage, process holding, blending, and surge applications for products such as water, food ingredients, beverages, dairy products, chemicals, pharmaceutical solutions, and other compatible liquids.
MFR: HUB Technologies
Stock No.:
52384003Used HUB Technologies 55,500 Gallon Horizontal Pressure Tank
Used- HUB Technologies 55,500-gallon horizontal pressure tank constructed of 316L stainless steel with dished heads, an end-mounted swing arm manway cover, and supported on (2) saddles. Overall dimensions are approximately 68' long x 14' tall x 13' wide with an empty weight of approximately 33,000 lbs. Shell rated for 25 psi internal pressure and minus 0.75 psi vacuum at 125 degrees F. Suitable for bulk liquid storage, process holding, blending, and surge applications for products such as water, food ingredients, beverages, dairy products, chemicals, pharmaceutical solutions, and other compatible liquids.
MFR: HUB Technologies
Stock No.:
52384004316L Stainless Steel 55,500 Gallon Pressure Tank
Used- 316L stainless steel 55,500-gallon horizontal pressure tank manufactured by HUB Technologies with dished heads, an end-mounted swing arm manway cover, and supported on (2) saddles. Overall dimensions are approximately 68' long x 14' tall x 13' wide with an empty weight of approximately 33,000 lbs. Shell rated for 25 psi internal pressure and minus 0.75 psi vacuum at 125 degrees F. Suitable for bulk liquid storage, process holding, blending, and surge applications for products such as water, food ingredients, beverages, dairy products, chemicals, pharmaceutical solutions, and other compatible liquids.
MFR: HUB Technologies
Stock No.:
53267023Alloy Fabricators Inc. approximately 5600 gallon mix tank
Used Alloy Fabricators Inc. approximately 5600 gallon 304 stainless steel vertical mix tank. 90" diameter X 17' high straight side. Internal rated ATMOS @ 200 F. Dished heads. Top fittings: 21" manway, (2) 1.5", (4) 2", (1) 3", and (1) 4". 3" center bottom drain. Has (4) internal baffles. Equipped with dual flight 4-blade agitator driven by Philadelphia model PTERVS-08 S/N 307572, Ratio 38.9-1. Rated 1750 RPM input, 45 RPM output. Powered by 5 HP 3/60/460 volt motor. Lug mounted. Built 1979 OAH 27'
MFR: Alloy Fab
Stock No.:
52283022Used Farr Tenkay Model 2C Cartridge Type Dust Collector – 800 CFM, 1.5 HP Blower
Used- Farr Tenkay Model 2C Cartridge Type Dust Collector. 800 CFM. Rated for 564 square feet filtering area with (2) cartridges measuring 12.75" diameter x 26" long. Includes 6" air inlet, 6" outlet, hinged door, 15" diameter cone bottom discharge. Offered with Cincinnati Fan Model FB/12A Blower, driven by 1.5 HP, 3-phase, 60 Hz, 208-230/460 Volt, 3450 RPM motor. Serial# 9210.
MFR: Farr Co
