Chemical Equipment

Used Premier Mill ESD/V-10/5 Stainless Steel Media Mill – 10-Liter Grinding Chamber, 10 HP Drive

Used- Premier Mill Corp. Media Mill. Model ESD/V-10/5, Stainless steel. Manufactured in May 2000. 208 V power with a 10 HP drive motor and a 5 HP pump motor. In Premier's ESD nomenclature, the "10" designates the grinding chamber volume of 10 liters (2.64 U.S. gallons) rather than a batch size, since the machine is a continuous-flow mill and has no fixed batch capacity. Throughput and batch size depend on the product viscosity and the particle fineness required, with the mill paired to a feed or recirculation tank 10100 gallons for lab and pilot work, and 50300 gallons for production recirculation. Floor mounted construction and configured for high-shear mixing and dispersion with recirculation through the product loop, suitable for paints, inks, coatings, adhesives, chemicals, and specialty product formulations in laboratory, pilot, and production service

MFR: Premier

Used Stokes 33 station model 328-1 rotary tablet press. This is a rotary high speed tablet compressing machine. Tablet press has a 10 ton compression force, a 1-1/16" maximum tablet diameter, and a 1...

Used-Stokes 33 station model 328-1 rotary tablet press. This is a rotary high speed tablet compressing machine. Tablet press has a 10 ton compression force, a 1-1/16" maximum tablet diameter, and a 1-3/8" maximum depth of fill. The press is rated 1200 up to 3300 tablets/minute. Driven by a 7.5 hp 1800 rpm motor. Serial number T-664172. Press comes with many different die change parts. Requires 460 vac 3 phase electrical supply.

MFR: Stokes

Used APV Crepco liquid product temperature control system. Total 10 sq ft from all 3 stages. This is a custom made system that uses chilled and hot water to control and record product temperature. Eq...

Used-APV Crepco liquid product temperature control system. Total 10 sq ft from all 3 stages. This is a custom made system that uses chilled and hot water to control and record product temperature. Equipped with APV model Junior 3 sectioned plate and frame heat exchanger. The heat exchanger uses 34° F chilled water from an Edwards Engineering Model LSCC3A chiller. Chiller Serial # 853790. Chiller is rated at 36,000 BTU/HR. 281° F steam for hot water is supplies by outside source. Good condition.

MFR: APV

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

Dr. Pharm GZPS-83 Bi-Layer Tablet Press – 83 Station High Output Machine

Used 2020 Dr. Pharm automatic high-speed double-sided / bi-layer tablet press, model GZPS-83. Unit has 83 stations and is set up for BB tooling; tooling is not included. Rated output is approximately 79,600796,000 tablets/hr depending on application, with an operating rotation speed range of 880 RPM. Maximum tablet diameter is 13 mm, maximum irregular tablet length is 16 mm, maximum fill depth is 16 mm, and punch diameter is 19 mm. Unit is powered by an approximately 11 kW main motor and includes HMI interface, dust collector, original manufacturer's warranty, and onsite support. Possible applications and suitable products include high-speed single-layer and bi-layer tablet production for compatible pharmaceutical, nutraceutical, vitamin, supplement, and other compressed tablet products.

Used Zanchetta (IMA) T Tote Bin

Used- Zanchetta (IMA) T Tote Bin, approximately 10.5 cubic feet (300 liter) (79.2 Gallons), Stainless Steel. 40" diameter x 4" straight side x 24" cone bottom. 15 top opening, 6" discharge. Mounted on a stainless steel frame.

MFR: IMA

Used 10.5 cubic foot Zanchetta T Tote Bin

Used- Approximately 10.5 cubic foot Zanchetta T Tote Bin (300 liter) (79.2 Gallons), Stainless Steel. 40" diameter x 4" straight side x 24" cone bottom. 15 top opening, 6" discharge. Mounted on a stainless steel frame.

MFR: IMA

Used 300 Liter Industrial T Tote Bin, Made by Zanchetta

Used- 300 Liter Industrial T Tote Bin, Made by Zanchetta, approximately 10.5 cubic feet (79.2 Gallons), Stainless Steel. 40" diameter x 4" straight side x 24" cone bottom. 15 top opening, 6" discharge. Mounted on a stainless steel frame.

MFR: IMA

Alfa Laval Fermenter / Reactor, Approximate 40 Liter (10.5 Gallon), 316L-Unused-

Unused- Alfa Laval Fermenter / Reactor, Approximate 40 Liter (10.5 Gallon), 316L Stainless Steel, Vertical. Approximate 12" diameter x 22" straight side, bolt-on flat top, dished bottom. Internal rated 45 PSI/FV at -20 to 400 degree F. 316L Stainless steel Jacket rated 150 psi/FV at -20 to 400 degree F. Bottom entering agitation 1/2hp drive, missing agitator. (1) Spray ball. Side lug mounted with load cells. National Board #264. Serial #786-100/17. Built 2004. Includes control panel with Wedgewood technology model 653 absorbance monitor, Mettler toledo Jag xtreme digital read out, (4) metering valves. All mounted on stainless steel frame.

MFR: Alfa Laval

Used Drais Mannheim Plow Mixer/Dryer – Type TK 400-Turbu Kneter, 400L, 321 Stainless Steel

Used- Drais Mannheim Plow Mixer/Dryer, Type TK 400-Turbu Kneter. Material of construction is 321 (1.4541) stainless steel on product contact parts. Stainless steel mixing body. Total capacity is 14.12 cubic feet (400 liter), Maximum working capacity 10.6 cubic feet (300 liter). Minimum working capacity 4.23 cubic feet (120 liter). Stainless steel double jacketed for heating/cooling rated at 90 psi (6 bar). Heating/cooling surface approximately 17 square feet (1.7 m2). Inside rated for 0 psi at 122 degree F (50 degree C). FM I Becker plows driven via a Stimrad-Aufsteckgetribe gearbox, Type H 2HH 5A by an 82.5HP/55Kw-400 volt AC/50cycle/3PH Non EX motor, Type K 11 R 250 M 4 KT-200H. Mixing speed 175 RPM. Twin screw feeder, driven by 0.55 KW / 0.83 HP - 400 volt AC / 50 cucle / 3 Ph motor, 3.9" (100 mm) bottom outlet valve. Inspection door with counter weights. Overall dimensions: 12' long x 34" width x 54" high (3700 mm long x 1050 mm width x 1650 mm high). Weight 5192 pounds (2360 kgs) empty. Serial # 55918. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Draiswerke

Industrial Groen TDH-40 Tabletop Steam Kettle – 40-Quart, Tilting, Natural Gas

Used- Groen 40 Quart Capacity Table Top Kettle, Model TDH-40, Stainless Steel. Approximate 16-1/2" diameter x 14" deep. Self-contained steam jacketed unit with natural gas heated steam source contained within unit. Input rated 52,000 btu / hr. 2/3 bottom jacket rate 50 psi at 300 degrees F. Manual tilting with pour lip. Mounted on a base. National Board# 29964, Serial# 29964. 1/60/110 Volt.

MFR: Groen

IN STOCK- Paul O. Abbe Model RB-100 Ribbon Blender. New.

NEW & IN STOCK- Paul O. Abbe Model RB-100 Ribbon Blender. In -Stock .100 Cubic Foot working capacity. 108 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 44.9" wide x 93.8" long x 49.3" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 30 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 31 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 4.7" wide x 14.2" flush air operated plug valve. Discharge housing is approximate 18.5" wide x 24" long. Approximately 8" discharge height. Approximate weight 7,260 pounds. Approximate overall dimensions: 63.3" wide x 146.4" long x 80.8" high. Controls are available upon request.

MFR: Paul O Abbe