Chemical Equipment

Industrial Vacuum Belt Filter - Pannevis RT, 316 SS & Polypropylene

Used- Pannevis Horizontal Vacuum Belt Filter, Type RT, 316 Stainless Steel/Polypropylene Construction. Approximate 5.3 square meter filtration area. Filter 960 x 5600mm. Vacuum tray. Driven by a .75 kw, 3/50/380 volt varispeed motor. Mounted on a carbon steel frame. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Pannevis

Used Feldmeier 3,700 Gallon Vertical Single Wall Mix Tank.

Used- Feldmeier 3,700 Gallon Vertical Single Wall Mix Tank. 316L stainless steel. Cone bottom. Tank height is 19'6". Sidewall is dented. Ladder is with the tank, no safety cage.

MFR: Feldmeier

In STOCK AND New- Paul O. Abbe, Model RB-375 Ribbon Blender

NEW & IN STOCK- Paul O. Abbe, Model RB-375 Ribbon Blender.In -Stock . 375 Cubic Foot working capacity. 441 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 67.7" wide x 157.5" long x 78.8" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 75 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 20 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 5.5" wide x 27.6" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 36.2" long. Approximately 4" discharge height. Approximate weight 20,944 pounds. Approximate overall dimensions: 91.9" wide x 237.1" long x 104.7" high. Controls are available upon request.

MFR: Paul O Abbe

Used – 3,800 Gallon Stainless Steel Vertical Storage Tank – 316 SS, Flat Top, Di

Used- Stainless Steel Vertical Storage Tank, Approximately 3800 Gallon Capacity, 316 Stainless Steel. Flat top, Dish bottom. Approximately 94" diameter x 128" straight side. Openings Top" (3) 2" 23" x 23" manway with cover. 2" Center bottom outlet, approximate 9" discharge height. Mounted on (4) Carbon steel legs.

Unused GF Corporation MDL-050CM Micro Mist Spray Dryer – 3 kg/h Stainless Steel Lab Spray Drying System (2021)

Unused GF Corporation Micro Mist Spray Dryer, Model MDL-050CM. Stainless steel construction with 3 kg/hour (6.6 lbs/hour) evaporation capacity at 200 C (392 F) inlet and 60 C (140 F) outlet temperatures. Approx. 39" diameter x 40" straight side drying chamber with four-fluid nozzle, co-current airflow, cyclone and filter bag collection, 50 ml/min liquid feed pump, touch screen controls, and 5 kW heater. 3 phase, 200V electrical. Built 2021. Possible applications include spray drying liquid solutions and suspensions into fine powders for food, pharmaceutical, chemical, ceramic, and specialty material applications

Used Approximately 3900 Square Foot Kennedy Tank & Manufacturing Co Heat Exchanger

Used- Kennedy Tank & Manufacturing Co Horizontal Heat Exchanger. 304 Stainless shell and tube side. Overall dimensions: 44" diameter x 20'6" long. Shell rated 50 at 250 degree F and tubes rated 38/FV at 250 degree F. Built 1997. Mounted on short saddles. Fittings: top (1) 4", (2) 6"; shell vent/drain (2) 2"; bottom (1) 24" and (1) 6". Tubes are 15' face to face length with (990) 1" tubes. Included bolt-on dished heads. Approximately 3900 Square Foot

MFR: Kennedy

Used AMK Double Arm Mixer VIU Strength Class IV – 1500L Capacity, 316SS, 135HP, Tilt Discharge, Built 2005

Used- AMK Double Arm Mixer, Type VIU-Strength Class IV. 316 (V4A) Stainless Steel on product contact parts. Max working capacity 396.8 gallon (1500 liter). Z-blades. Double jacketed bowl and not rated vacuum. Working temp 68-392 deg F (20-200 deg C). Hydraulic tilt discharge mechanism. top cover. Mounted on carbon steel support frame. New year 2005. Previous used in a pigment application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: AMK

Used Tetra Pak (Scanima) STM-1250V Aseptic Mixing Reactor | 1,500L High Shear Vacuum Vessel

Used- Tetrapak (Scanima) 1,500 Liters (396 Gallon) 316 Stainless Steel Vacuum and Pressure Jacketed Aseptic High Shear Mixing Reactor, Model STM-1250V. The vessel is rated full vacuum /45 PSI internal pressure, and is jacketed for 75 PSI maximum pressure, maximum jacket temperature is 150 Degrees C. Bottom entering high shear agitator driven by a 50 HP (3/60/460V) motor. Includes a 2" Pneumatic discharge valve and 2" recirculation valve. Includes a control panel with VFD, a pneumatic panel and an operator PC station. Built 2009.

MFR: TetraPak

Used Kurimoto Double Arm Sigma Blade Mixer | 1500L (396.8 Gal) | 304 SS | Jacketed | EPS Application

Used Kurimoto Double Arm Sigma Blade Mixer | 1500L (396.8 Gal) | 304 SS | Jacketed | EPS Application. 304 (V2A-1.4301) Stainless Steel on product contact parts. Working capacity 396.8 gallon (1500 liter). 304 stainless steel jacket bowl with counterweights. Sigma style blades. Last used in an EPS (super absorption) application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Kurimoto Osaka

Heavy-Duty 1500L Kurimoto Sigma Blade Mixer – 304 SS, Jacketed, Double Arm Kneader

Heavy-Duty 1500L Kurimoto Sigma Blade Mixer 304 SS, Jacketed, Double Arm Kneader. 304 (V2A-1.4301) Stainless Steel on product contact parts. Working capacity 396.8 gallon (1500 liter). 304 stainless steel jacket bowl with counterweights. Sigma style blades. Last used in an EPS (super absorption) application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Kurimoto Osaka

Rosenmund 4 Square Meter Nutsche Filter, Model RPD4-388-86

Used- Rosenmund 4 Square Meter Nutsche Filter, Model RPD4-388-86. Bottom discharge; 904L stainless steel shell, 316 stainless steel jacket; Shell rated 75 psi/FV at 397 degrees F; Half pipe jacket rated 100 psi/FV at 392 degrees F; Base rated 150 psi/FV at 370 degrees F; 10 hp main drive; hydraulic pack; Serial # F69653-1185-1; National Board # 17935; Built 1986 (Rebuilt since).

MFR: Rosenmund

Used Scott Turbon DP-5-HYD Planetary Mixer – 4 Gal, Vacuum Capable, Dual Can System

Used- Scott Turbon Planetary Mixer, Model DP-5-HYD. 4 Gallon stainless steel mixing can, designed for mixing under vacuum. Vacuum hood is fitted with 2 approximately 2" sight/charge ports. First of 2 mixing cans is jacketed with a flat bottom and bottom outlet with a tri-clamp style end cap closure. The second mix can is not jacketed and has a cone bottom with a center bottom outlet with a tri-clamp end cap closure. Includes a car with foot activated hydraulic jack for mix can exchange. Also include 208 volt controls with raise and lower buttons. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Scott Turbon