Chemical Equipment

Used - Quadro Comil Model 196, 304/316 Stainless Steel, 8,000 Lbs/Hr Capacity, 10 HP

Used- Quadro Comil, Model 196, 304 Stainless Steel. Approximate capacity up to 8,000 pounds an hour. 8" diameter top feed, 12" diameter bottom discharge. 12' dia x 12' dia housing. Requires (missing) impeller and impeller hardware. Housing 304 stainless steel, shaft and discharge chute 316 stainless steel. Driven by a 10 hp, 3/60/208-230/460 Volt, 1750 rpm motor. Serial# 0387.

MFR: Quadro

Used Twin Motion 95-Gallon Stainless Steel Vacuum Mixer – Jacketed Kettle

Used- Twin Motion Vacuum Mixer, 95 Gallon, Stainless Steel. Approximate dimple jacketed mixing kettle, 30" diameter x 29" straight side, jacketed 10" up straight side, vacuum cover. Anchor style agitator with sidewall scrappers. Flat Top Lift/Lower Mechanism, driven by 10 hp, hydraulic system. Off set high speed disperser, driven by 10 hp, 3/60/230/460 volt, 1725 rpm motor. Board .90 Kw vacuum pump. Floor mounted. No manufacturers tag.

MFR: Unknown

Sturtevant Model 3B Simpactor Mill, 16" Diameter.

Used- Sturtevant Model 3B 16" Diameter Simpactor Mill. Carbon steel construction. Approximate capacity 3.5 tons per hour, depending on product. Set up with 6" x 6" flanged inlet with 6" diameter center bottom discharge. Includes 2-part rotating discs, driven by 10 HP inverter motor, rated for 230/460V, 3-phase, 60 Hz, 3425 RPM. Includes v-belt drive with guard. Serial# 504.

MFR: Sturtevant

Used Patterson-Kelley 10 Cu Ft Double Cone Vacuum Dryer – Stainless Steel, Gear Motor, On Stands

Used- Patterson-Kelley Double Cone Vacuum Dryer, 10 Cubic Feet Working Capacity, Stainless steel construction, Maximum material density 125 pounds a cubic foot. Top port, bottom outlet with valve. Shell driven by an approximate 1/2hp gear motor. Mounted on stands. Sold as is, no jacket ratings.

MFR: Patterson Kelley

Used Groen TDH-40 Table Top Kettle – 40 Quart, Gas-Heated, Steam Jacketed

Used- Groen Table Top Kettle, Model TDH-40, 40 Quart Capacity, Stainless Steel. Approximate 16-1/2" diameter x 14" deep. Self-contained steam jacketed unit with natural gas heated steam source contained within unit. Input rated 52,000 btu / hr. 2/3 bottom jacket rate 50 psi at 300 degrees F. Manual tilting with pour lip. Mounted on a base. National Board# 12100, Serial# 1988-10.

MFR: Groen

Commercial Tabletop Kettle for Sale – Groen TDH-40, Natural Gas Heated

Used- Groen Model TDH-40 Table Top Kettle, 40 Quart Capacity, Stainless Steel. Approximate 16-1/2" diameter x 14" deep. Self-contained steam jacketed unit with natural gas heated steam source contained within unit. Input rated 52,000 btu / hr. 2/3 bottom jacket rate 50 psi at 300 degrees F. Manual tilting with pour lip. Mounted on a base. National Board# 13816, Serial# 1989-4. 1/60/110 Volt.

MFR: Groen

Commercial Stainless Steel Groen TDH-40 Kettle – 40 Qt, Self-Contained Steam

Used- Groen Stainless Steel Table Top Kettle, Model TDH/40-SP, 40 Quart Capacity. Approximate 16-1/2" diameter x 14" deep. Self-contained steam jacketed unit with natural gas heated steam source contained within unit. Input rated 52,000 btu / hr. 2/3 bottom jacket rate 50 psi at 300 degrees F. Manual tilting with pour lip. Mounted on a base. National Board# 32385, Serial# 32385. 1/60/110 Volt.

MFR: Groen

Used Patterson-Kelley 10 Cu. Ft. 304 Stainless Steel Twin Shell V-Blender – 135 Lb./Cu. Ft. Density Rating

Used- Twin Shell (V-Blender) - Patterson Kelly 10 Cubic Foot 304 Stainless Steel. Rated maximum material density 135 lbs./cu. Ft. Has (2) 18" top charge ports and a 8" bottom discharge with a butterfly valve. Interior has milled finish. Unit is direct driven by approximately 2HP right angle geardrive with an electric brake. Has Dodge pillow block bearings. Mounted on carbon steel stand giving 48" from bottom valve to floor. Overall dimensions 91" long X 30.5" wide X 101" tall.

MFR: Patterson Kelley

Used Fitzpatrick Comminutor FitzMill, Model DASO- 6 – Stainless Steel

Used- Fitzpatrick Comminutor Fitzmill, Model DASO-6, Stainless Steel. (16) 1" wide x 5/16" thick x 3-3/4" long fixed knives. Approximately 6" diameter x 14" long Cutting chamber. Has gravity feed throat with pan, and bottom screen discharge with 33-1/2" discharge height. Driven by a 10hp, 3/60/208-230/460 volt, 1760 rpm motor. Control panel. Mounted on a carbon steel base with (4) legs and casters. Serial# 7815.

Unused LACT Hydraulic Pump Unit | 200 GPM @ 45 PSI | Viking Q4127A Pump | 10 HP Motor | 3” Stainless Piping | Static Mixer, Valves & Meter | Skid-Mounted | Built 2021

Unused- LACT Hydraulic Pump Unit. 200 GPM flowrate at 45 PSI discharge pressure. 3" stainless steel piping. Includes Viking Q4127A Pump, driven by a 10hp 3/60/460v 1800rpm motor. static mixer, valves, and meter. Skid mounted. Built 2021.

Used IKA Works Colloid Mill MK2000/5 – 10 HP High-Shear Inline Mill, 10,000 RPM

Used- IKA Works Colloid Mill, Model MK2000/5. 304 stainless steel construction. 10 GPM max. flow rate. 2" inlet, 1.5" outlet. 3" rotor diameter. 10,000 RPM mill speed. Adjustable shear rate and radial gap. 23 m/s tip speed. Driven by a 10hp 3/60/230-460V 3515 RPM motor.

MFR: IKA Works

IKA Works DR2000/5 High Shear Disperser 3-Stage Stainless Steel

Used IKA Works High Shear Dispersing Machine DISPAX-REACTOR, Type DR2000/5. Three-stage high shear inline disperser. Flow rate maximum 10 GPM, depending on product. Sanitary clamp, 2" inlet, 1.5" outlet, made of 316 stainless steel. Thermal jacket rated 36 psi (2.5 bar) at 120 degrees C. Driven by 10 HP, 230/460 Volt, 3 Phase, 60 Hz, 3600 rpm, Inverter duty, TEFC, Explosion Proof motor. Serial # 3778-20.

MFR: IKA Works