Chemical Equipment

Used Tampa Tank Inc. 16,696 Gallon Stainless Steel API 650 Tank – Model T-501

Used- Tampa Tank Inc. 16,696 Gallon 304 Stainless steel. API Standard 650, Annex S and J, 12th Edition with Addendum 1. 14 diameter x 176" high. Design liquid level of 146" It is designed for a specific gravity of 1.05, an atmospheric design pressure, and a temperature range from a minimum metal temperature of 50F to a maximum design temperature of 100F. The tank was built using 304L stainless steel in two 1/4" thick shell courses and carries the manufacturer's No stress relief was applied. The purchasers tank number is listed as T-501. Built 2015. serial number 6166-A.*** OVERALL DIMS NEED TO BE CONFIRMED ***

Used Tampa Tank Inc. 16,696 Gallon Stainless Steel API 650 Tank – Purchaser Tank #T-501

Used Tampa Tank Inc. 16,696 Gallon Stainless Steel API 650 Tank Purchaser Tank #T-501, Annex S and J, 12th Edition with Addendum 1. 14 diameter x 176" high. Design liquid level of 146" It is designed for a specific gravity of 1.05, an atmospheric design pressure, and a temperature range from a minimum metal temperature of 50F to a maximum design temperature of 100F. The tank was built using 304L stainless steel in two 1/4" thick shell courses and carries the manufacturer's No stress relief was applied. The purchasers tank number is listed as T-501. Built 2015. serial number 6166-B.*** OVERALL DIMS NEED TO BE CONFIRMED ***

Groen DR1218 Scraped Surface Heat Exchanger/ Evaporator

Used- Groen Scraped Surface Heat Exchanger/ Evaporator, Model DR 1218, 304 Stainless Steel. Approximate heat surface area 9.5 square feet. Approximate 12" diameter x 18" long, with (3) scrapers. Internal rated 120 psi at 353 degrees F. Cover with 2-3/4" opening, 2" diameter outlet. Bottom driven by a 1hp, 3/60/230/460 volt, 1700rpm motor through a reducer. Includes a Waukesha size 3 pump, driven by a .75hp 3/60/230/460 volt, 1100rpm motor through reducer. Includes blower, and mounted control panel. Mounted on a stainless steel frame. Serial & National Board# 131204

MFR: Groen

Used Hiller Decanter Centrifuge – Model DECAPAC DP45-432 (125 GPM, 50 HP, Trailer-Mounted)

Used- Hiller Decanter Centrifuge, Model DECAPAC DP45-432. 125 GPM capacity; 3500 RPM max. operating speed; 3800 RPM max. bowl speed; 93 lbs/cubic foot max. feed density; Duplex stainless steel bowl material; 17.72" inside bowl diameter; .43" bowl wall thickness; 122 degrees F max. ambient operating temperature; 0 bar max. ambient operating temperature. Driven by a 50 HP, 3550 RPM, 60/460V motor. SN #JS00100. Installed in 40' trailer. 8' x 10' office in nose of trailer.

Used Industrial Double Spiral Ribbon Blender, 170 Cubic Foot, Stainless Steel Construction

Used Stainless Steel Double Spiral Ribbon Blender, Approximate 170 cubic foot. With top cover and (2) bag dump stations. 60 HP motor & reducer. Center bottom outlet with valve.

Used Walker Ribbon Blender For sale100 gallon working capacity Walker per plate, 170 cu.ft. total capacity, model blender, serial # 1450, Material of constr1uction 316 stainless steel. The ribbon is ...

Used Walker Ribbon Blender For sale100 gallon working capacity Walker per plate, 170 cu.ft. total capacity, model blender, serial # 1450, Material of constr1uction 316 stainless steel. The ribbon is 24" diameter at the bottom of cone. Unit is driven by hydraulic drive. Unit is 60" wide x 48" straight side x 84" long. Unit is 80" over all height. Unit stands on six stainless steel legs. End nozzles are two 1-1/2" tri-clamp fitting. Bottom nozzle is one 6" tri clamp fitting. Previously used for food production (salsa).

MFR: Walker

Brew Tank, Model WP-30BBL. 30 BBL Capacity

Used- Brew Tank, Model WP-30BBL. 30 BBL Capacity, approximately 1700 gallons capacity. 304 Stainless Steel. Approximately 82" diameter x 66" straight side. Dished Top, Slight Cone Bottom. Openings Top: 20" manway, 4", 3", Side: 1-1/2", 1", (2) 1-1/2" side bottom, 2" center bottom outlet, with 9" discharge height. Mounted on (4) stainless steel legs. Serial# WP-498-30BBL.

Used D.E. Co. 1,720 gallon vertical stainless steel tank. National Board # 893. Serial # 6609. Internal pressure rating of 250 psi and full vacuum. Jacket has been cut into to add internal nozzle. ...

Used-D.E. Co. 1,720 gallon vertical stainless steel tank. National Board # 893. Serial # 6609. Internal pressure rating of 250 psi and full vacuum. Jacket has been cut into to add internal nozzle. Tank has a 68" diameter and 88" straight side height with 16" dish bottom and 16" dome top. Overall dimensions with legs and jacket are 72" diameter x 144" tall. Top has a 20" manway, a 7.5" center flanged fitting. (3) 3" flanged fittings, (5) 2" sanitary fittings and a 12" flanged fitting. Bottom has 2" threaded fitting for jacket and a 2.5" center sanitary fitting. Side has a 2" threaded fitting for jacket. Built 1966. Good condition as a pressure tank only.

Used Yamato Spray Dryer Model DL-41 – Lab-Scale Fine Particle Spray Dryer

Used Yamato Model DL-41 Laboratory Spray Dryer is a compact, laboratory-scale spray drying system designed for the production of fine powders from liquid samples in research, product development, and pilot-scale applications. This versatile unit is capable of producing fine granules with particle sizes ranging from approximately 40 to 100 microns, while offering a maximum water evaporation capacity of approximately 3,000 mL per hour for efficient drying performance. The system features an adjustable operating temperature range from 40 to 300 degrees C (104 to 572 degrees F) and accommodates liquid feed rates of up to 80 mL per minute, providing excellent process flexibility for a wide variety of formulations. The unit is equipped with a two-fluid atomizing nozzle incorporating a 0.7 mm orifice for consistent atomization and uniform particle production. The spray dryer includes an approximately 17-3/4" diameter x 39" high glass drying chamber, allowing clear visual observation of the drying process, along with a 3-1/2" diameter x 6" straight-side cyclone separator and a 3-3/4" diameter x 9-3/4" straight-side collection jar for efficient powder recovery. The electrically heated system operates on 220 Volt power and is mounted on casters for convenient mobility within laboratory or pilot plant environments. Designed for laboratory-scale drying of solutions, suspensions, and extracts, the Yamato DL-41 is ideally suited for research and development as well as pilot-scale work in the pharmaceutical, nutraceutical, food ingredient, chemical, biotechnology, and plant extract industries. It is an excellent choice for producing uniform fine powders in the 40 to 100 micron range with repeatable, controlled processing. Serial # B0400003.

MFR: Yamato

Used Gulf Coast Exchanger Shell & Tube Heat Exchanger | 1733 Sq. Ft. | 300 PSI | U-Tube | 2017

Used Gulf Coast Exchanger Shell & Tube Heat Exchanger | 1733 Sq. Ft. | 300 PSI | U-Tube | 2017; SA-789 U-tube construction; SA-516-70 shell construction. 300 psig shell side design pressure; Full vacuum pressure; 390 psig shell side test pressure; 500 degrees F shell side design temp.; -20 degrees F shell MDMT; 1 pass shell side. 300 psig tube side design pressure; Full vacuum pressure; 390 psig tube side test pressure; 500 degrees F tube side design temp.; -20 degrees F MDMT; 2 pass tube side. (306) U-tubes .75" OD x approx. 13'3" straight length. OAD: 35.25" D x approx. 215.5" L. SN 824114, NB #103. Built 2017.

MFR: Gulf Coast Environmental

Installed But Unused Southern Heat Exchanger Model 29-144-E-STC Reboiler 1,761 Sq. Ft. Carbon Steel Shell & Tube Heat Exchanger

Installed but unused Southern Heat Exchanger Model 29-144-E-STC Reboiler vertical shell and tube heat exchanger with 1,761 sq. ft. of heat transfer surface area and carbon steel construction. Carbon steel shell is rated for 413 pounds per square inch/full vacuum at -20 to 650 degrees F. Equipped with (789) carbon steel 3/4" O.D. x 12' long x 12-gauge tubes rated for 610 pounds per square inch/full vacuum at -20 to 650 degrees F. Features (2) 8" shell-side openings and side lug mounting. Shell only, no heads included. Serial #8-00022, National Board #13099, built 2008. Overall dimensions approximately 202"L x 60"W x 60"T with a weight of approximately 18,200 lbs. Possible applications include industrial reboiling, process heating, vaporization and heat transfer service with suitable process fluids compatible with carbon steel construction.

MFR: Southern Heat Exchanger

Unused SINO XMZ50/870 Hydraulic Filter Press – 50m² Solid-Liquid Separation System. Gold Mining Leach Plant.

Unused SINO Filter Press, Model XMZ50/870, hydraulic plate and frame filter press used for solid-liquid separation in industries such as palm oil processing, mining, metallurgy, and wastewater treatment. (38) Polypropylene filter plates measuring 870 mm / 34.35" each, with a total filtration area of 50 square meters / 1766 cuft and a filtration volume of 748 liters. Operating at a pressure of 0.6 MPa, the unit is made of carbon steel and includes a hydraulic closing mechanism and cake discharge system. Its dimensions are 4110 mm (L) 1400 mm (W) 1230 mm (H), and it weighs approximately 3456 kg. S/n N/A. Year 2020. Gold Mining Leach Plant.