Chemical Equipment
Stock No.:
11059379Used Paul Mueller Company, 15,700 Gallon Food Grade Storage Tank
Used Paul Mueller Company 15,700 Gallon Food Grade Storage Tank. Approximate capacity of 15,700 gallons. Constructed with a 12' outside diameter x 17' 5/8" straight side and dished top and bottom heads. Equipped with a 3" flanged center bottom outlet for complete product drainage. Carbon steel painted exterior with skirt-mounted design. Top head features an 18" diameter manway with cover and multiple flanged process connections. Overall height is approximately 23' 6". Estimated tank weight is approximately 11,000 lbs. Previously used in brewery service. Suitable for food, beverage, brewery, and other sanitary storage applications.
MFR: Paul Mueller
Stock No.:
53462011Used GEA Niro Soavi NS3037H Homogenizer | 6,000 LPH Stainless Steel Dairy Homogenizer
Used GEA Niro Soavi NS3037H Homogenizer | 6,000 LPH Stainless Steel Dairy Homogenizer. Designed for 6000 liter (1587 US-Gallon) per hour with a max pressure of 100 BAR (1500 PSI). Single stage. Puppet Valves. 30 Kw-400volt/50cycle/3Ph motor. Incl. Oil pumping system inside the unit. Control panel mounted on unit. Overall dimensions: 2300 mm (7'5") long x 1520 mm (4'9") width x 1550 mm (5'1") high. Weight 2 tonnes. Last used in dairy application. Serial # 5162 New year 2003. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Gea-Niro
Stock No.:
51121011Used Hutchinson Hayes 5500 High-G Centrifuge | 316 SS Wetted Parts | 3700 RPM | 230 GPM (52 m³/hr) | 16" x 55" Bowl | Control Panel | Mounted on Carbon Steel Frame
Used Hutchinson Hayes High-G Centrifuge Model 5500. 316 Stainless Steel Wetted Parts. Max Bowl Speed 3700 RPM, Max Operating Temp 275 F, 52 M3/hr max flow. 230GPM. Approximately 16" diameter x 55" long bowl. Serial# 995500-220. Mounted Control Panel, Centrifuge is mounted on carbon steel frame.
MFR: Hutchinson Hayes
Stock No.:
51188005Used Fitzpatrick Chilsonator Model 16Lx20D with HAS030 Comminutor Mill – Stainless Steel
Used Fitzpatrick Chilsonator Model 16Lx20D with HAS030 Comminutor Mill, All stainless-steel wetted parts. The Chilsonator uses dual 16" x 20" radial cored rolls with controlled hydraulic pressure and feed augers to compact powders into fees screws for improved flow and reduced dust. These feed screws are then processed by the HAS030 Comminutor Mill, which employs interchangeable screens and a hammer/knife design for precise particle size reduction. This integrated system delivers efficient compaction, milling, and screening for pharmaceutical, chemical, food, and specialty material applications. (A 102-1/2" , 5 DECK SCREENER IS NOT INCLUDED WITH THIS SYSTEM. AARON WILL FACILITATE LOADING INCLUDED IN THE FINAL PRICE). Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Fitzpatrick
Stock No.:
54176001Used CPM Cracking Mill – Model DPHX1600-84, 125 HP
Used- CPM Cracking Mill, Model DPHX1600-84. (2) pair of 16" Diameter x 84" Long chilled iron rolls. Carbon steel construction, corrugated rolls, manual roll adjustment. High volume pocket feeder. Driven by a 125hp 3/60/460V 1800rpm motor. Built 2020. Previously used on soybeans.
MFR: CPM
Stock No.:
51105005Rebuilt Flottweg Z4E/4-901g Solid Bowl Decanter Centrifuge – Alloy 2.4602, 3200 RPM, 30 kW
Rebuilt- Flottweg Z4E/4-901g Solid Bowl Decanter Centrifuge. Alloy 2.4602 construction (product contact areas); maximum bowl speed 3200 rpm; approximate single lead conveyor with welded hard facing; Back drive with powerpack; feed pipe; lubrication system; adjustable liquid plate dams; Approx. 30 KW; 400/3/50/2956 rpm ABB main drive motor with frame/casing; vibration isolators; safety guards and control. New 2001. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Flottweg
Stock No.:
45003001Used Alfa Laval PM-3600 Super-D-Canter Centrifuge | 3,500 RPM | Industrial Liquid-Solid Separation
Used- Alfa Laval / Sharples PM-3600 Super-D-Canter Centrifuge. 316 Stainless Steel construction (product contact areas), maximum bowl speed 3500 rpm, 4-1/2" single lead conveyor, liquid plate dams, gearbox 125:1 ratio, base, casing, approximate 37kw (49.6hp) main drive motor (380/50/3), back drive moto. Mounted on a carbon steel sub-frame with vibration isolators, safety guards.
MFR: Sharples
Stock No.:
11453551Used 160 Gallon Feldmeier Reactor, 316L stainless steel construction
Used-160 Gallon Feldmeier Reactor, 316L stainless steel construction, 320 grit and electropolished internal, approximately 48" diameter x 10" straight side, hinged dish top, hemispherical bottom, rated 50 psi and full vacuum at 350 f internal, jacketed for 150 psi at 350 f, anchor agitator with sidewall scrappers, driven by 7.5 hp motor drive, and mechanical seal, bridge mounted tilt out agitation system with hydraulic cylinder and onboard 2 hp hydraulic pump, top mounted baffle, (3)3", 2", (4)1.5" top ports, 2" bottom outlet, on 4 stainless steel legs.
MFR: Feldmeier
Stock No.:
53448002Unused Howden ExVel Turbo Fan HBXrG-20/675-LG0 – High-Performance Industrial Fan
Unused- Howden ExVel Turbo Fan, Model HBXrG-20/675-LG0. Maximum inlet volume; 3.18 m3/s, 6738.99 ACFM. Maximum pressure rise; 290.96 kPa, 42.20 PSI. Maximum inlet temperature; 176.7 C, 350.1 F. Maximum outlet temperature; 196.0 C, 384.8 F. Maximum impeller power; 1196 kW, 1603.9 HP. Nominal operation speed; 5681 rpm. Design temperature; 230.0 C, 446.0 F. Design pressure; 1878 kPa(a), 272.2 PSI. Siemens 1500 series PLC and Bently Nevada 3500 monitor system. Serial # NFF00019-10, Built 2020.
Stock No.:
546600072022 Alfa Laval TL15-BFG 139-Plate Gasketed Heat Exchanger
Offered in unused condition, this 2022 Alfa Laval TL15-BFG gasketed plate heat exchanger has 139 plates providing 1,622.1 square feet of transfer area. The unit has a maximum allowable working pressure (MAWP) of 150 PSI at 150F and a minimum design metal temperature (MDMT) of -20F at 150 PSI. It is ASME and National Board stamped, was purchased new, and has never been placed into service. Year 2022. Possible applications include industrial heating, cooling, heat recovery, process temperature control, HVAC, chemical, food and beverage, pharmaceutical, utility, water treatment, and manufacturing processes using compatible liquid products or process fluids.
MFR: Alfa Laval
Stock No.:
54660008Unused Alfa Laval TL15-BFG 1,622 Sq. Ft. Plate Heat Exchanger
This unused 2022 Alfa Laval Model TL15-BFG heat exchanger uses a gasketed plate design with 139 plates and 1,622.1 square feet of heat-transfer surface. The unit has a maximum allowable working pressure (MAWP) of 150 PSI at 150F and a minimum design metal temperature (MDMT) of -20F at 150 PSI. It is ASME and National Board stamped, was purchased new, and has never been placed into service. Year 2022. Possible applications include industrial heating, cooling, heat recovery, process temperature control, HVAC, chemical, food and beverage, pharmaceutical, utility, water treatment, and manufacturing processes using compatible liquid products or process fluids.
MFR: Alfa Laval
