Cannabis Industry Equipment

Used Hi-Vac model 240 industrial vacuum system is rated for up to 800 cfm. Belt driven by a 40 hp, 1770 rpm motor that requires 208-230/460 vac, 3 ph electricity. Inlet diameter is 3". Unit has a 1.5...

Used-Hi-Vac model 240 industrial vacuum system is rated for up to 800 cfm. Belt driven by a 40 hp, 1770 rpm motor that requires 208-230/460 vac, 3 ph electricity. Inlet diameter is 3". Unit has a 1.5 yard dump hopper with automatic dust bag shaker and air lift. Serial no. 1880.

MFR: Hi-Vac

Used Hi-Vac model 240 industrial vacuum system is rated for up to 800 cfm. Belt driven by a 40 hp, 1770 rpm motor that requires 208-230/460 vac, 3 ph electricity. Inlet diameter is 3". Unit has a 1.5...

Used-Hi-Vac model 240 industrial vacuum system is rated for up to 800 cfm. Belt driven by a 40 hp, 1770 rpm motor that requires 208-230/460 vac, 3 ph electricity. Inlet diameter is 3". Unit has a 1.5 yard dump hopper with automatic dust bag shaker and air lift. Serial no. 3227.

MFR: Hi-Vac

Used Kason Model K72-1-SS 72" Single-Deck Circular Vibratory Screener With 2 HP Motor

Used Kason Model K72-1-SS 72" single-deck circular vibratory screener. Unit includes one 18" deep carbon steel upper section with one 18" center opening, (2) 8" openings and one 16" x 8" covered oval side discharge. Screener has one 18" deep stainless steel deck with a funneled 10" bottom opening and 5.5" top opening. Mounted on a 36" high carbon steel base and driven by a 2 hp motor requiring 230/460 VAC, 3-phase electrical service. Approximate overall dimensions are 108" x 80" x 80". Job #83113. Serial #M7128. Manufactured May 2006. Possible applications include screening, scalping, sizing and separation of compatible powders, granules, dry ingredients and other suitable bulk solids.

MFR: Kason

Used Drexel FL40EX 4,000 lbs explosion proof electric forklift. Serial # 900826-089. Current model. Battery is 36 VDC with a 6 hr rate run time. Has a maximum lift height of 106". The fork legnth is ...

Used-Drexel FL40EX 4,000 lbs explosion proof electric forklift. Serial # 900826-089. Current model. Battery is 36 VDC with a 6 hr rate run time. Has a maximum lift height of 106". The fork legnth is 35.25". Mast has lift and tilt controls. Equipped with brass clad forks to prevent sparks. Includes MAC-Motor Model 18M1050-9C22 battery charger. Forklift weight with battery is 8530 pounds. Hour meter shows 1061 hrs. Built 9-27-91. The battery has been charged and seems to hold a charge. This forklift has low hours and appears to be in very good operational condition. (Is stored inside at our Warehouse) Good condition. Tires are for outside use. New cost is $75,776.00 including the battery and charger.

Used Two Oakes Model 8MB51, jackted high shear continuous rotor stator pin mill mixers with 316 stainless steel contact parts mounted on a stainless steel base. Rated from 50 to 1,000 lb per hour. 2....

Used-Two Oakes Model 8MB51, jackted high shear continuous rotor stator pin mill mixers with 316 stainless steel contact parts mounted on a stainless steel base. Rated from 50 to 1,000 lb per hour. 2.5" feed flanges. Mixers are driven by 5 hp, 1680 rpm motors requiring 460 V, 3 ph electricity. Allen Bradley powerflex 70 controls. System mounted on a stainless steel base frame. Overall dimensions are approximately 45" W x 50" L x 79" H

MFR: Oakes

Used Sonic Corp. Sonolator model XS-1500 inline high pressure homogenizer with a Moyno model 9P8-SSE-X 8" progressive cavity pump. The Sonolator is an in-line homogenizing device that uses high press...

Used-Sonic Corp. Sonolator model XS-1500 inline high pressure homogenizer with a Moyno model 9P8-SSE-X 8" progressive cavity pump. The Sonolator is an in-line homogenizing device that uses high pressure and ultrasonic cavitational energy to create emulsions. The positive displacement pump has a 4" sanitary tri-clamp fitting that connects to an 8" flanged inlet and the Sonolator has a 2" sanitary tri-clamp outlet. The pump has up to an estimated 20 gpm and a 600 psi discharge pressure. Driven by a 40 hp 3560 rpm motor that has a 6.2:1 reducer. Overall dimensions are 30" wide x 200" long x 32" tall. Requires 230/460 vac 3 phase electrical supply. Fair condition.

MFR: Sonic

Used Oakes model 14MC20 high shear, continuous, rotor and stator type pin mill mixer. Equipped with radial flow disc with high shear action consisting of front / rear stator and 20 hp Reeves variable...

Used-Oakes model 14MC20 high shear, continuous, rotor and stator type pin mill mixer. Equipped with radial flow disc with high shear action consisting of front / rear stator and 20 hp Reeves variable speed drive. The mix head is jacketed. The mix head has 1.5" triclamp connections. Equipped with a size 30 Waukesau positive displacement pump with 1.5" triclamp connections. All mounted in a stainless steel skinned cabinet on casters. 230/460 vac 3 ph power required. Oakes mixers are designed to homogenize or aerate slurry to produce a highly uniform and stable cell structure. OAD 41" wide x 74" long x 77.5" tall.

MFR: Oakes

Used Sweco White Water Filter. Model WWF30-3L. Serial Number 76835-C-1194. 304 stainless steel construction. Filter has a high flow rate, centrifugal screening of suspended solids down to 500 mesh (2...

Used-Sweco White Water Filter. Model WWF30-3L. Serial Number 76835-C-1194. 304 stainless steel construction. Filter has a high flow rate, centrifugal screening of suspended solids down to 500 mesh (25 Microns)(May require change of screens), a flow rate of 1350-600 GPM, (9) 10"x 20" screen panels, (9) 10" x 10" screen panels, (1) 8" infeed flanged connector, (1) 12" outfeed flanged connector, and (1) 8" concentrate flanged connector. Filter was new in 1994. Have manual on file. Good condition.

MFR: Sweco

Used 250 gallon APV Crepaco Dixie style medium shear mixer. Stainless steel food grade construction. Vessel is 40" diameter x 60" straight side length with approximately 6" dished top and bottom. The...

Used-250 gallon APV Crepaco Dixie style medium shear mixer. Stainless steel food grade construction. Vessel is 40" diameter x 60" straight side length with approximately 6" dished top and bottom. The bottom has a 3" and a 4" tri clamp ports. The top has one 18" manway w/lid. One sprayball (1.5" tri clamp) One 2" connection to the breather. Two each 1.5" and Five each 2" tri clamp connections. It has the standard 3 wheel, centrifugal fan type impellers. The drive is missing. The vessel is mounted in a stainless steel bar grate platform that is 65" x 113.5" x 57.5" high. The over all dimensions are 65"w x 113.5"l x 100.5" tall. Serial number K-0149. Good condition.

MFR: APV/Crepaco

Used Becker Pumps Corp oil flooded rotary vane vacuum pump. Model U4.400 SA/K. Vacuum pump has a pumping speed of 283 cfm and a vacuum to 2.5 Torr. Pump has a 3" NPT inlet and a 4" NPT outlet. The pu...

Used-Becker Pumps Corp oil flooded rotary vane vacuum pump. Model U4.400 SA/K. Vacuum pump has a pumping speed of 283 cfm and a vacuum to 2.5 Torr. Pump has a 3" NPT inlet and a 4" NPT outlet. The pump is driven by a 15 hp 1165 rpm motor. Serial number 1469721. Requires 230/460 vac 3 phase electrical supply.

Used ACS Ancaster Conveying Systems model MD 8" QC-R-SS stainless steel sanitary rotary air lock. It has (8) 3" talll vanes on its rotor. The rotor assembly is polished to 150-180 grit finish. It ha...

Used-ACS Ancaster Conveying Systems model MD 8" QC-R-SS stainless steel sanitary rotary air lock. It has (8) 3" talll vanes on its rotor. The rotor assembly is polished to 150-180 grit finish. It has 8" inside diameter inlet/outlet flanges. Quick clean design has removable end that slides on guides for easy clean out. Also has air purge seals. Driven by 1 hp WEG motor and gearbox assembly that turns vanes at 20 rpm. Requires 208-230/460 vac 3 ph electrical supply. Good Condition. Low hours, project cancelled.

Used ACS Ancaster Conveying Systems model MD 8" QC-R-SS stainless steel sanitary rotary air lock. It has (8) 3" talll vanes on its rotor. The rotor assembly is polished to 150-180 grit finish. It ha...

Used-ACS Ancaster Conveying Systems model MD 8" QC-R-SS stainless steel sanitary rotary air lock. It has (8) 3" talll vanes on its rotor. The rotor assembly is polished to 150-180 grit finish. It has 8" inside diameter inlet/outlet flanges. Quick clean design has removable end that slides on guides for easy clean out. Also has air purge seals. Driven by 1 hp WEG motor and gearbox assembly that turns vanes at 20 rpm. Requires 208-230/460 vac 3 ph electrical supply. Good Condition. Low hours, project cancelled.