Cannabis Industry Equipment

Pre-Owned Vulcan K6ETT Electric Counter Kettle | 6 Gal | 50 PSI

Used Vulcan-Hart Model K6ETT Electric Counter Tilting Kettle, 6 Gallon Capacity. Approximately 11.8" Diameter x 14-1/2" deep. Ellipsoidal bottom. 2/3 Jacketed rated 50psi at -20 to 300 degrees F. Frame mounted. National board# 21596, Serial# 46-3002235, Built 2011. 3/1PH 50/60HZ 8/10KW 208/240V requirements.

MFR: Vulcan

Lodige FKM600D Plow Mixer

Used- Lodige Model FKM600D batch-type plow mixer with 6 cubic feet working capacity and 10 cubic feet total capacity. 304 stainless steel, non-jacketed mixing chamber approximately 32" diameter x 50" long with 4" diameter shaft, (3) bolt-on plows, (2) bolt-on end scrapers, (2) 18" x 15-1/2" side access doors, and (2) 12" top openings. 9" x 7" bottom outlet with manually operated door and air-purge seals. Serial # 9046. Driven by an approximately 10 hp motor through Falk reducer. Includes control panel with Allen-Bradley PanelView 600 and SLC 5/04 CPU. Mounted on carbon steel stand. Suitable for dry powders, premixes, granular ingredients, spices, nutraceuticals, feed additives, chemical blends, and similar products.

MFR: Lodige

Used Siemens EK1000-2 6.56 MW Steam Turbine Generator Plant

Used- Siemens 6.56 MW Steam Turbine Generator Plant, Model EK1000-2, Manufactured 1981. Siemens Model EK1000-2 multistage extraction/condensing steam turbine generator system, rated at 6,560 kW (6.56 MW) shaft output, manufactured in Germany in 1981, Serial No. T5719. Turbine designed for operation at 9,000 RPM with live steam pressure of 48.3 bar (700 PSI) at 404C (759F), intermediate steam extraction pressure of 7.3 bar (106 PSI), and condensing exhaust design pressure of 12 kPa absolute. Equipped with Siemens 6:1 speed reduction gearbox, rated at 6,900 kW continuous duty, reducing turbine speed from 9,000 RPM to 1,500 RPM. Driven generator is a Siemens Model 1DU7534-7FE82-Z three-phase synchronous alternator, Serial No. D8025106101, rated at 8,200 kVA, 11,000 volts, 50 Hz, 1,500 RPM, with 0.8 power factor. System includes associated excitation equipment, electrical control and protection panels, Siemens and GE protection components, SEL digital relays, DECS-250 digital excitation controller, lubrication system with approximately 6,300-liter oil reservoir, and (2) Alfa Laval Model M10-BDFG plate heat exchangers manufactured in 2021. Associated plant equipment includes main steam condenser and steam dump condenser, subject to confirmation of sale scope. Turbine and gearbox underwent extensive major inspection and maintenance in JulyAugust 2023, including rotor removal, internal inspections, non-destructive testing, rotor dynamic balancing, gearbox inspection, bearing inspection, generator electrical testing, and vibration assessment. Inspection records reported acceptable gearbox condition and low post-commissioning vibration levels at that time. Main condenser was retubed in 2012 and inspected in 2023. Originally installed as part of an industrial cogeneration and energy recovery system at a sulphuric acid production facility. Complete engineering documentation, maintenance records, mechanical drawings, electrical schematics, and inspection reports available.

Used Sweco LX60C168 60” Low Profile Screener – Single Deck, 3D Motion, Spare Motor & Springs, Built 2024

Used- Sweco Model LX60C168 60" Single Deck Low Profile Screener. The Sweco LX Low Profile Flow-Thru Separator allows for high capacity wet or dry scalping in a compact, low headroom design. Dual .69 hp motors mounted on opposite sides of the LX allow unrestricted flow of material and create the 3-D motion that allows oversize material full discharge, keeping the screen clear for maximum product flow. Low headroom requirements (as little as 15 inches) and straight flow design, allow the LX to fit easily into existing product lines without reworking the entire system. 12" center bottom outlet. Includes used spare motor, and six (6) spare springs. Unit is mounted on a 27" high base. No lid. " screen installed. 230-460/3/60-volt input. Serial# 554445-A-09/24, built 2024.

MFR: Sweco

Used Lee 60 Gallon Stainless Steel Steam Jacketed Kettle Model 60D7S

Used Lee 60 Gallon Stainless Steel Cooking & Mixing Kettle, Model # 60D7S, Serial # 32675-1, built in 2004. Stainless steel 60 gallon kettle equipped with a single-action scraped-surface agitator with scrapers missing. Steam jacket is rated for 90 psi at temperatures up to 332 F, National Board number 9758. Kettle has a 1.5" diameter outlet with pneumatic discharge valve and is driven by a 1 HP, 3 phase, 60 cycle, 230/460 volt motor. Suitable for cooking, heating and mixing applications involving products that can be processed in a steam-jacketed, agitated kettle.

MFR: Lee Ind

Used Groen RA-60 60 Gallon Stainless Steel Jacketed Cooking Kettle with Agitator

Used Groen 60 gallon stainless steel jacketed cooking and mixing kettle, Model # RA-60, Serial # 03588, National Board number 139462, equipped with a single-action scraped-surface agitator with scrapers missing, 125 psi steam jacket rated up to 353 F, 1.5" diameter outlet, and 1.5 HP, 3-phase, 60-cycle, 230/460-volt motor with final agitation speed of 34 RPM. Suitable for batch cooking, heating, blending, and mixing applications and products requiring low-speed scraped-surface agitation.

MFR: Groen

Used Sweco 60" Vibro Energy Separator – Model LS60C, Stainless Steel, Single Deck

Used- Sweco 60" Vibro Energy Separator, Model LS60C, Stainless Steel. Single Deck. Driven by a 2.5hp, 3/60/460 volt motor. Includes top cover. Serial# LS60-481-54. Incomplete.

MFR: Sweco

Groen Model DTA-3-60 SP Twin 60 Gallon Kettles

Used-Groen Model DTA-3-60 SP Twin 60 Gallon Kettles with Twin Pivoting Agitator. National Board stamped jackets rated 45 PSI @ 300 Deg F. Stainless steel common frame, rinse faucet. Elec: 3/60/230/460V.

MFR: Groen

Used Sweco 60” Vibro-Energy Separator – Stainless Steel, Model US60S88

Used- Sweco 60" diameter Vibro-Energy Separator, Model US60S88, Stainless Steel. Single deck, single separation. Missing top frame. Driven by 2.5hp 3/60/230/460 volt, 1160rpm motor. Mounted on stainless steel frame with casters. Serial# US60-387-03.

MFR: Sweco

Used Hydro-Pac LX Carbon Dioxide Compressor, Model C02.2-60-1975LX-CO2. Single stage; 400 to 2176 psi suction pressure; 2176 psi max. discharge pressure; Capacity @ 600 psig, 55 degree F inlet: 127 scfm; Capacity @ 870 psig, 55 degree F inlet: 989 scfm; 15 gpm (minimum) cooling water requirements at 60-80 degrees F. 60 HP, 3/60/230/460V motor, 120V control. Built 2020.

Used- Hydro-Pac LX Carbon Dioxide Compressor, Model C02.2-60-1975LX-CO2. Single stage; 400 to 2176 psi suction pressure; 2176 psi max. discharge pressure; Capacity @ 600 psig, 55 degree F inlet: 127 scfm; Capacity @ 870 psig, 55 degree F inlet: 989 scfm; 15 gpm (minimum) cooling water requirements at 60-80 degrees F. 60 HP, 3/60/230/460V motor, 120V control. Built 2020.

Used Atlas Copco Model GA45 Industrial Rotary Screw Air Compressor | 60 HP

Used- Atlas Copco Rotary Screw Air Compressor, Model GA45. Liquid cooled; rated 294 cfm at 107 psi; 107 psig max. discharge pressure; Elektronikon control panel. Driven by a 60 hp, 3/60/230/460 volt, 3550 rpm motor. 17537 load hours.

MFR: Atlas Copco

Used 60kW Caterpillar Natural Gas Generator – Model G3304NA, Enclosed, 3-Phase, Skid Mounted

Used 60kW Caterpillar Natural Gas Generator Model G3304NA, Enclosed, 3-Phase, Skid Mounted; 3 phase, 60Hz, 480V, 1800rpm; load tested & ready to ship.

MFR: Cat