Cannabis Industry Equipment

Used Marley Double Flow Cooling Tower | 450 Ton Industrial Cooling System (Model MHF7113)

Used- 450 Ton Marley Double Flow Cooling Tower Model MHF7113. 410-746 ton cooling capacity, based on 3gpm/ton at 95 f hot water 85 F cold water 78 F wet bulb configuration. Built 2016. Dimensions 13'-11" long x 25'-10" wide x 22' tall 41,310lbs.

MFR: Marley

Unused Scott TSM42156 Twin-Shaft Continuous Mixer – 5 TPH Industrial Continuous Paddle Blender

Unused Scott TSM42156 Twin-Shaft Continuous Mixer 5 TPH Industrial Continuous Paddle Blender. 42" x 156" shaft dimensions. Designed for 33 lbs/cubic foot. Rated 5 tons/hour. 5 minute retention time. Carbon steel construction. 12" x 24" inlet, 12" x 36" discharge. 120 RPM blender speed. 20 HP shaft mount gear reducer. Driven by a 20 HP, 3/60/230-460V motor. Built 2021.

MFR: Scott Turbon

Used R&M Italia 160L Glass Lined Reactor Train with 70L Receiver – 150 PSI – XP Agitator – Tycon Reglass – QVF System

Used- R & M 160 Liter Italia Glass Reactor Train with 160 Liter Glass Lined Reactor. Removable dish top, dish bottom, intermediate QVF glass mid section, rated 150 psi and full vacuum at +356/-112 F internal, jacketed for 150 psi and full vacuum at +356/-112 F, top mounted 1 hp, 230/460 volt, xp agitator drive, mechanical seal, 3 blade retreat curve agitator, tube baffle, 70 liter R & M Italia receiver, glass lined, removable dish top, dish bottom, internediated QVF glass mid section, rated 150 psi and full vacuum at 356 F internal, jacketed for 150 psi and full vacuum at 356 F, reactor and receiver bottom lift/lower mechanisms, reglass tycon reactor bottom serial# 1109, national board# 650, receiver serial# 8037, national board# 423, reactor reglassed by Tycon in 2005.

Used R&M Italia 160L Glass Lined Reactor Train with 70L Receiver – 150 PSI – Jacketed – XP Agitator – QVF Sections

Used- 160 liter R & M Italia 160 liter glass lined reactor, removable dish top, dish bottom, intermediate QVF glass mid section, rated 150 psi and full vacuum at 356 F internal, jacketed for 150 psi and full vacuum at 356 F, top mounted 1 hp, 230/460 volt, xp agitator drive, mechanical seal, 3 blade retreat curve agitator, tube baffle, 70 liter R & M Italia receiver, glass lined, removable dish top, dish bottom, intermediated QVF glass mid section, rated 150 psi and full vacuum at 356 F internal, jacketed for 150 psi and full vacuum at 356 F, , reactor and receiver bottom lift/lower mechanisms, reactor serial# 8047, national board# 425, receiver serial# 8040, national board# 427

Used Thermaline T13 Plate Heat Exchanger – Stainless Steel, 975,672 BTU/Hr

Used- Thermaline Plate Heat Exchanger, Model T13, Stainless Steel. Approximately 42.9 square feet. Flow rate: 44 GPM (Process Side), 145 GPM (Service process). Heat exchanged 975,672 BTU/Hr. Designed temperature 150 psi at 300 degrees F. Gasket material EPDM, CLIP. (33) Plate material 0.6mm, 316 Stainless Steel, CDX. Frame material 304 stainless steel. Serial# 27423-21.

Stainless Steel Thermaline Plate Heat Exchanger, 44/145 GPM – Used T13 Model

Pre-Owned Thermaline Plate Heat Exchanger, Model T13, Stainless Steel. Approximately 42.9 square feet. Flow rate: 44 GPM (Process Side), 145 GPM (Service process). Heat exchanged 975,672 BTU/Hr. Designed temperature 150 psi at 300 degrees F. Gasket material EPDM, CLIP. (33) Plate material 0.6mm, 316 Stainless Steel, CDX. Frame material 304 stainless steel. Serial# 27423-22.

Used Thermaline Plate Heat Exchanger, Stainless steel.

Thermaline Model T13 Plate Heat Exchanger - Used, Stainless Steel. Approximately 42.9 square feet. Flow rate: 44 GPM (Process Side), 145 GPM (Service process). Heat exchanged 975,672 BTU/Hr. Designed temperature 150 psi at 300 degrees F. Gasket material EPDM, CLIP. (33) Plate material 0.6mm, 316 Stainless Steel, CDX. Frame material 304 stainless steel. Serial# 27423-23.

Buy Used Thermaline T13 Plate Heat Exchanger – 33 Plates, 316 SS

Thermaline T13 Plate Heat Exchanger Stainless Steel, Previously Used. Approximately 42.9 square feet. Flow rate: 44 GPM (Process Side), 145 GPM (Service process). Heat exchanged 975,672 BTU/Hr. Designed temperature 150 psi at 300 degrees F. Gasket material EPDM, CLIP. (33) Plate material 0.6mm, 316 Stainless Steel, CDX. Frame material 304 stainless steel. Serial# 27423-25.

Used 4,200 Gallon Feldmeier Stainless Steel Vertical Storage Tank – Food-Grade

Used- Feldmeier Stainless Steel Storage Tank, Approximately 4,200 Gallons. Approximately 240" High (straight side) X 72" diameter. Last used in Olive Oil operation.

MFR: Feldmeier

Used Feldmeier 4,200 Gallon Stainless Steel Storage Tank – Vertical, Side Manway

Used- Feldmeier Stainless Steel Approximately 4,200 Gallon Storage Tank, Vertical. Approximately 240" High (straight side) X 72" diameter. Side manway. Last used in Olive Oil operation.

MFR: Feldmeier

Stainless Steel 4,200-gallon vertical storage tank,

Stainless Steel 4,200-gallon vertical storage tank, 6' diameter x 20' high, fabricated by Valley Foundry & Machine Works. Previously used for solvent storage. UL rated vessel.

MFR: Valley Foundry

Stainless Steel 4,200-gallon vertical storage tank,

Stainless Steel 4,200-gallon vertical storage tank, 6' diameter x 20' high, fabricated by Valley Foundry & Machine Works. Previously used for solvent storage. UL rated vessel.

MFR: Valley Foundry