Cannabis Industry Equipment

Used JV Northwest 1,300-Gallon Single-Wall Tank – 316 Stainless Steel

Used- JV Northwest Single-Wall Tank, 1,300-gallon. Constructed of 316 stainless steel. 78" diameter x 60" straight side; flat top, dish bottom design; Bottom head includes a 2" diameter center bottom outlet; Top ports include (1) 2" diameter tri-clamp fitting; Tank is mounted on (4) stainless steel legs and includes a bridge mount for agitation or other top-mounted equipment; Shell Thickness: 2.3mm/0.090 inches. Previously used in cosmetics applications.

MFR: JV Northwest

Used – 50 Ton Horizontal Liquid Carbonic CO2 Tank – Bulk Cryogenic Storage

Used 50 Ton Horizontal Liquid Carbonic CO2 Tank Bulk Cryogenic Storage. SA-516-70 Shell & Heads. 78" diameter x 598" Straight Side. MAWP: 360psi at -20 to 650 degrees F. 15" diameter manway. Product: Carbon Dioxide. National Board# 4230, Serial# 59980, Built 1978.

MFR: Liquid Carbonics

Used Winkworth ZX500-6 Z-Blade Mixer-Extruder | 500L Working | Vacuum Lid | Jacketed | 304 SS | With Tool Temp Units

Used Winkworth ZX500-6 Z-Blade Mixer/Extruder | 500L Working | Vacuum Lid | Jacketed | 304 SS | With Tool Temp Units. 500 liter (132Gal) working capacity with a 778 liter total capacity (product dependent). 304 stainless steel chamber measures approx. 1,090mm long x 956mm wide x 735mm deep. Unit has vacuum rated domed hood/lid. 304 stainless steel external jacket. Each Z-blade driven by 30kw (40hp) motor/gearbox. Stainless steel screw discharge driven by 22kw motor/gearbox. Unit includes control panel. Includes (1) used Tool Temp model TT-14500 H and (1) Used Tool Temp model TT-508 X heater/cooling units. Also includes (3) Hydac oil coolers mounted on common frame. Unit has main control unit and local operator controls. Motors are dual rated 50/60 Hz. Blade Bowl Clearance Straight side 3mm , End 4mm. Cooling Jacket Design Pressure Min Atmos Max 3.5 bar.G Design Temp Min 10C Max 250C Test Pressure 6.7 bar.G Design & Manufacturing Code SEP (Sound Engineering Practise). Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Winkworth

Used New Brunswick Scientific Co. 500L(132 gallon) capacity Stainless Steel Tank. National Board #566. Diameter is 28” with a 40” straight side with jacket on the lower 31". Vessel- Max Allowable W...

Used-New Brunswick Scientific Co. 500L(132 gallon) capacity Stainless Steel Tank. National Board #566. Diameter is 28” with a 40” straight side with jacket on the lower 31". Vessel- Max Allowable Working Pressure 40PSIG/O PSIA. Jacket-Max Allowable Working Pressure 35 PSIG. Vessel- Max Temp. 300°F. Jacket- Max Temp. 300°F. Vessel- Hydrotest 80 PSIG. Jacket- Hydrotest 100 PSIG. The top has an 18”RFSO with blind flange with a 1” agitator shaft(no motor included) , one 2- ¼” threaded sanitary fitting, one 1-¾” sightglass, one- 3/8” plug, one ¼” plug, one- ¾” plug and a Ametek MNG DIV. Pressure Gauge. The neck has one- ¾” threaded coupling, one- 1” threaded coupling, and two- ¼” couplings with plugs. The top portion has two- 2” 150lb. Pad flanges, one -1” 150lb. Pad flange, five- 1” couplings with fittings and two- 1” sanitary threaded couplings. The jacketed portion has two- 1” threaded couplings and one- ¾” threaded coupling. Below the jacket is three- 1” couplings with fittings, two- 1’ sanitary fittings, and one- ¾” sanitary fitting. The bottom has one- 1” center drain valve, one- 2” 150lb. Pad flange, one- 1” threaded coupling and one- ¾” threaded coupling. The unit sits on four carbon steel legs and has an agitator bracket. Built 1982. Sits on four carbon steel legs. Overall Size is 84” x 52”.

MFR: New Brunswick Scientific

Used 500 liter (132 gallon) New Brunswick Scientific Co. Chemical Reactor. 304 SS jacket and 316L SS construction. National Board # 567. Has 28" diameter, 44" straight sidewith jacket on the lower 31...

Used 500 liter (132 gallon) New Brunswick Scientific Co. Chemical Reactor. 304 SS jacket and 316L SS construction. National Board # 567. Has 28" diameter, 44" straight sidewith jacket on the lower 31". Unit's vessel max allowable pressure 40 PSIG and max temperature is 300 F. Unit's Jacket max allowable pressure 35 PSIG and max temperature 300F. Hydrotest pressure is rated 80 PSIG on vessel and 100 PSIG on jacket. Top has n 18”RFSO with blind flange with a 1” agitator shaft(no motor included) , one 2- ¼” threaded sanitary fitting, one 1-¾” sightglass, one- 3/8” plug, one ¼” plug, one- ¾” plug and a Ametek MNG DIV. Pressure Gauge. The neck has one- ¾” threaded coupling, one- 1” threaded coupling, and two- ¼” couplings with plugs. The top portion has two- 2” 150lb. Pad flanges, one -1” 150lb. Pad flange, five- 1” couplings with fittings and two- 1” sanitary threaded couplings. The jacketed portion has two- 1” threaded couplings and one- ¾” threaded coupling. Below the jacket is three- 1” couplings with fittings, two- 1’ sanitary fittings, and one- ¾” sanitary fitting. The bottom has one- 1” center drain valve, one- 2” 150lb. Pad flange, one- 1” threaded coupling and one- ¾” threaded coupling.. Unit Stand on (4) 30" steel legs. Overall dimensions: 32" x33" x 82" h.

MFR: New Brunswick Scientific

Unused T&C Stainless 5,000 Liter 316L Sanitary Jacketed Reactor

Unused T&C Stainless 5,000 Liter 316L Stainless Steel Jacketed ASME Sanitary Reactor With Metenova ZG9 Magnetic Mixer. Vessel has a 5,000 liter working capacity and approximately 6,326.1 liter total volume, with a 72" internal diameter x 72" straight side. Constructed of 316/316L stainless steel with 3/8" shell and heads. Vessel is rated for 45 psi from -20 to 350 F and 15 psi vacuum. 316/316L stainless steel dimple heat-transfer surface is rated for 150 psi from -20 to 350 F and includes 1-1/2" inlet and outlet connections. Product-contact surfaces are mechanically polished and electropolished to 15 Ra, with approximately 35 Ra exterior finish. Vessel is insulated with 2" insulation and stainless steel sheathing. Equipped with bottom-mounted Metenova ZG9 magnetic mixer with RPM sensor and stainless steel IP66 IE3 drive, 4" ASEPCO TF40-100-2 flush-mounted pneumatic diaphragm outlet valve with USP Class VI EPDM diaphragm, (3) 3" sprayballs rated 38 GPM at 25 psi, vortex breaker, thermowell, sight/light connection, GWR, conductivity, pH and sample connections, 4" product-supply and retentate-return connections, and multiple additional sanitary process connections. Three-leg-supported vessel is constructed to ASME Section VIII, Division 1. Overall height is approximately 165-5/16" with an empty weight of approximately 5,294 lb. Drawing available. Possible applications include sanitary mixing, blending, holding and temperature-controlled processing of compatible pharmaceutical, biopharmaceutical, food, beverage, cosmetic, personal-care and sanitary chemical products.

MFR: T&C

Used ER Manufacturing 13,200 Gallon Vertical Carbon Steel Storage Tank with Cone Bottom

Used ER Manufacturing 13,200 Gallon Vertical Carbon Steel Storage Tank with Cone Bottom. 13,200 gallon/50 cubic meter capacity. 9'3" diameter x 36' overall height. 24" x 36" side manway. 8" center bottom outlet port. 6" internal feed line. Cone bottom. With removable caged ladder. On (4) leg frame.

MFR: ER

Unused Alfa Laval TK20-BWFX Plate and Frame Heat Exchanger – 1,344 Sq. Ft.

Unused Alfa Laval Model TK20-BWFX plate and frame heat exchanger, manufactured in 2024, with approximately 1,344 square feet of heat transfer surface area. Unit is rated for maximum allowable working pressures of 612/235 PSIG at 230F and a minimum design metal temperature of -20F at 612/235 PSIG. Equipped with approximately 0.8 mm plates and an A-dimension of approximately 992 mm. ASME certified and National Board registered, NB No. 65553. Serial number AAN1000484, Alfa Laval order number 18036240. Equipment is identified as a Cathode Cooler, equipment tag NG-21-HX-0001. Certified by Alfa Laval, Richmond, Virginia. Late-model industrial plate and frame heat exchanger suitable for demanding process cooling and heat-transfer applications. Possible applications include liquid-to-liquid process cooling, data center cooling water systems, industrial chilled water systems, heat recovery, cathode cooling, closed-loop process cooling, HVAC heat transfer and other compatible high-capacity industrial thermal management applications.

MFR: Alfa Laval

IN STOCK AND NEW- Paul O. Abbe Model RB-135 Ribbon Blender.

NEW & IN STOCK- Paul O. Abbe Model RB-135 Ribbon Blender. In -Stock .135 Cubic Foot working capacity. 146 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 49.6" wide x 105.5" long x 53.6" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 40 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 33 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 4.7" wide x 19.7" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 28.4" long. Approximately 8" discharge height. Approximate weight 7,920 pounds. Approximate overall dimensions: 64.8" wide x 158.3" long x 84.7" high. Controls are available upon request.

MFR: Paul O Abbe

J.H. Day 135 Cu Ft Ribbon Blender, Stainless Steel, (2) Bag Dump Stations, XP Motor

Used J.H. Day stainless steel double spiral ribbon blender with approximate 135 cu ft capacity. Equipped with top cover, (2) bag dump stations, 30 HP explosion-proof motor and reducer, and center bottom outlet with valve. Serial #85051.

Used Cummins DQGAB 1500 kW Diesel Generator – Tier 2, PMG, Sound Enclosure, UL2085 Fuel Tank

Used-1500 kW standby (1350 kW prime) Cummins diesel generator set model DQGAB, SN-G110233080. Cummins QSK50-G4 engine rated 2220 HP at 1800 RPM, SN-25366503, EPA Tier 2 emissions. 3/60/277/480V, 12 lead reconnectable to other voltages. 2500 Amp main-line circuit breaker. PMG - Permanent magnet generator. Oversized generator end rated 1612 kW. UL 2200 listed package. Engine cooling high ambient air temperature. PowerCommand digital control panel. Battery charger. Coolant heater. Sound attenuated enclosure. 5181 gallon UL2085 listed sub-base fuel tank with secondary containment. 770 Hrs. Year 2011. Passed load test 1/3/2025. Overall dimensions enclosure with genset 150W x 397L x 153H, 51,000 lbs, fuel tank 144W x 397L x 37H 25,389 lbs.

MFR: Cummins

Used Alfa Laval M10-MFG Plate Heat Exchanger – 137.3 Sq. Ft., 100 PSI, Stainless Steel

Used- Alfa-Laval Plate Heat Exchanger, Model M10-MFG. 137.3 Square Feet. (58) 304 Stainless Steel plates, approximately 253mm (9.9") wide x 34" long x 0.40mm thick plates. Rated 100psi at -20 to 190 degrees F. Mounted in expandable frame with (3) legs. Serial# 30105-61105.

MFR: Alfa Laval