Adhesive and Sealant Equipment
Stock No.:
54687199Used ACS Ancaster Conveying Systems model MD 8" QC-R-SS stainless steel sanitary rotary air lock. It has (8) 3" talll vanes on its rotor. The rotor assembly is polished to 150-180 grit finish. It ha...
Used-ACS Ancaster Conveying Systems model MD 8" QC-R-SS stainless steel sanitary rotary air lock. It has (8) 3" talll vanes on its rotor. The rotor assembly is polished to 150-180 grit finish. It has 8" inside diameter inlet/outlet flanges. Quick clean design has removable end that slides on guides for easy clean out. Also has air purge seals. Driven by 1 hp WEG motor and gearbox assembly that turns vanes at 20 rpm. Requires 208-230/460 vac 3 ph electrical supply. Good Condition. Low hours, project cancelled.
Stock No.:
54687201Used VAV Scan vibratory Conveyor. Stainless steel construction. Conveyor pipe of 16" diameter and 148" long.Has clean openings on boths ends. The unit has three 6" inlets/outles and two 12" inlets/...
Used VAV Scan vibratory Conveyor. Stainless steel construction. Conveyor pipe of 16" diameter and 148" long.Has clean openings on boths ends. The unit has three 6" inlets/outles and two 12" inlets/outlets. ith 2 vibro motor, 1200 rpm each. Has a support floor mounting with 4 springs and 4 schocks absorbant. 38" in the tall end and 10" in the short end. The unit number is : 29751 and year: 1991.
Stock No.:
54687202Used VAV Scan vibratory Conveyor. Stainless steel construction. Conveyor pipe of 16" diameter and 148" long. Has clean out openings on boths ends. The unit has three 6" inlets/outles and two 12" inl...
Used VAV Scan vibratory Conveyor. Stainless steel construction. Conveyor pipe of 16" diameter and 148" long. Has clean out openings on boths ends. The unit has three 6" inlets/outles and two 12" inlets/outlets. Equipped with 2 vibro motors, 1200 rpm each. Has a support floor mounting with 4 springs and 4 schocks absorbant. 41" in the tall end and 8 1/2" in the short end. The unit number : 29759 and year: 1991.
Stock No.:
54688001Used Fluid Air PolarDry 050 Electrostatic Spray Dryer – 50 kg/hr
Used- Fluid Air PolarDry Model 050 Electrostatic Spray Dryer 50 Kg/Hr Evaporation Capacity. Designed for GMP processing with nitrogen drying and atomizing gas. Rated for maximum evaporation capacity of 50 kg/hr, maximum drying gas inlet temperature of 140 C, maximum drying gas flow of 1,870 m/hr, and design vacuum of 12 kPa. Atomizing gas specifications include maximum inlet temperature of 150 C, maximum pressure of 4.14 bar, and design flow of 100 m/hr. Features stainless steel spray chamber with FDA-approved PTFE liner, electrostatic atomization technology, pneumatic powder collection and conveying system, (3) reverse-pulse cartridge filters, HEPA filtration, dehumidification coil, drying gas heater, blower, and oxygen monitoring safety system. Equipped with Watson Marlow peristaltic feed pump, Allen-Bradley PLC with Batch Architect control system, operator HMI, stainless steel process skid, and elevated access platform with stairs. Product contact surfaces include 316L stainless steel and FDA-approved PTFE. Electrical requirements include 480V, 3-phase, 60 Hz. Possible applications include pharmaceutical, nutraceutical, biotechnology, food ingredient, and specialty chemical spray drying of compatible liquid formulations into powdered products.
MFR: Fluid Air
Stock No.:
54688002Used Fluid Air PolarDry Model 001 Laboratory Electrostatic Spray Dryer, 1 kg/hr
Used- Fluid Air PolarDry Model 001 Electrostatic Spray Dryer, 1 Kg/Hr Evaporation Capacity. Designed for cGMP laboratory, research and development, and pilot-scale processing of aqueous feedstocks. Rated for maximum evaporation capacity of 1 kg/hr with (1) electrostatic atomizing nozzle, maximum nitrogen drying gas inlet temperature of 140 C, drying gas flow of 43 Nm/hr, maximum atomizing gas temperature of 150 C, and maximum atomizing gas pressure of 552 kPa. Features 316L stainless steel and ULTEM machine tower construction, FDA-approved acrylic spray chamber, (2) 5-micron polyester cartridge filters with 316 stainless steel wire mesh and reverse-pulse cleaning, HEPA exhaust filtration, electric drying gas heater, brushless DC blower, and 1-liter glass powder collection system. Equipped with Watson Marlow 313 peristaltic feed pump with 6220 RPM operating range, AccuJet electrostatic nozzle controller, Allen-Bradley PLC with Batch Architect controls, operator touchscreen HMI, nitrogen inerting system, and integrated safety monitoring. Electrical requirements: 208240V, single phase, 50/60 Hz, 30 amps. Compact, portable stainless steel design. Possible applications include laboratory spray drying, powder formulation development, microencapsulation, pharmaceutical research, nutraceutical development, and processing of compatible aqueous food and specialty ingredient formulations.
MFR: Fluid Air
Stock No.:
54697004Unused CMS Heat Transfer Division, Inc. shell-and-tube heat exchanger, manufactured in Bohemia, New York, for Cincinnati Heat Exchangers. Unit is rated for 160 PSIG MAWP at 400F on both shell and tub...
Unused CMS Heat Transfer Division, Inc. shell-and-tube heat exchanger, manufactured in Bohemia, New York, for Cincinnati Heat Exchangers. Unit is rated for 160 PSIG MAWP at 400F on both shell and tube sides, with an external pressure rating of 14.7 PSIG at 400F. Manufactured in 2022 to ASME Section VIII requirements.
Stock No.:
54718001Used Kato 1 MW Natural Gas Generator with Waukesha L7042GSI Engine
Used- Kato Natural Gas Generator Package, Rated 1MW. Powered by a Waukesha Model L7042GSI engine. Components include: Exco Industrial Switchgear; ABB SACE L2895 1600 amp breaker/switch; McPherson ADVR-083 regulator; Woodward 2301A Control system; Altronic CPU-95 Ignition System; Altronic CPU-95 Enhanced Display Module; NewMar Battery Charger; and cooling system. 3ph, 480V, 1200 RPM. Rebuilt by Reagan Power and Compression in 2025. Reported 500 hours since rebuild.
Stock No.:
54718002Used Ideal Electric 1 MW Natural Gas Generator with Waukesha L7042GSI Engine
Used- Ideal Electric 1MW Natural Gas Generator Package. Open Skid. Waukesha L7042GSI Engine. Deep Sea Electronics Model 7310 MKII controller. Woodward 2301A governor. Larson Electronics 1600 amp, 600V manual breaker. Custom muffler system. Cooling system. 3/60/480. Fully Rebuilt by Pelstar in 2025. Reported 500 hours since rebuild.
MFR: Ideal Electric
Stock No.:
54570002Used Abbott Afinion 2 Analyzer – Compact Benchtop Point-of-Care Diagnostic System
Used- Abbott Afinion 2 analyzer designed as a compact benchtop diagnostic system used primarily for HbA1c, urine ACR (albumin/creatinine ratio), CRP, and lipid testing. The unit features a space-saving design with an integrated touchscreen interface, making it well suited for laboratory and point-of-care testing environments. Ideal for facilities seeking a compact analyzer with an intuitive user interface.
Stock No.:
53839001Used Accurate Thermal Systems Fluidized Temperature Bath – Model FTB LL27
Used- Accurate Thermal Systems Fluidized Temperature Bath, Model FTB LL27. Operating range: 50 Celsius/ 122 Fahrenheit to 605 Celsius/ 1121 Fahrenheit; 17.8" diameter x 43.0" deep internal bath dimensions. 17.8" diameter (15.8" diameter when using parts basket) 27.0" deep working volume. Ambient to 900oF - 3.5 hours heat up time. Serial # 1611-1115, built in 2015.
Stock No.:
53904003Used ACQUITY Preparative Supercritical Fluid Chromatography (SFC) System – Complete Analytical Package
Used- Acquity Preparative Supercritical Chromatography Unit. Consists of the following: ACQUITY Ultra Performance C2 ACQUITY UPC2 CM-A and CM-AUX, ACQUITY UPC2 PDA Detector, UPC2 Caffeine Standard, UPC2 and Viridis SFC Columns, ACQUITY UPC2 BEH 1.7?m 2.1 x 50mm Empower Software and Options, Waters CDS Computer Lenovo C20x, MONITOR, Lenovo ThinkVision Flat Panel. ACQUITY UPLC H-Class System ACQUITY UPLC H-Class CM Core System, ACQUITY UPLC TUV Detector, ,ACQUITY H-CLASS HEX/THF MOB. PHASE, Analytical Column Options: ACQUITY UPLC BEH C18 1.7?m, 2.1x100mm Col, Empower Software and Options: W/S, Waters CDS Computer Lenovo C20x MONITOR, Lenovo ThinkVision Flat Panel. SFC 80q, 200q 200BTq & 350: System, SFC80Q 110V Core, SFC Prep UV Sample Chemistry, Chiller, Accel 500 115V/60hz 2489 UV/Visible Detector for Prep SFC, ChromScope Workstation, RocketPort Card and Extension Cable, MONITOR, Lenovo ThinkVision Flat Panel, Low Pressure Fraction Collector, 6 Fract ACQUITY UPC2 and Viridis SFC Columns, 1 Viridis BEH 5?m 2.1x150mm Column. Like new condition
