Adhesive and Sealant Equipment

Used WPTI Double Barrel Rotary Kiln – High Temperature Industrial Thermal Processing System

Used- WPTI Double Barrel Rotary Kiln. Mild steel construction. Approx. 1200 degrees C max. operating temperature. Minimum operating temperature dependent on burner system and application. 3 phase power supply. Includes PLC control room. Does not include the burner system.

Used Stalam APEX 7 Radio Frequency Sterilizer for Sale

Used Stalam APEX 7 Radio Frequency Sterilizer. 7 kW. Throughput: Treats 0.5 - 2.3 kg/batch (1-5lb/batch). Processing Time: 14 min average cycle time. RF Frequency 27.12 MHz. Siemens Simatic HMI. Serial# 2464/1. Built 2019. 3/60/277/480 Volt. Product Applications Cannabis and Hemp Flower.

Used 30 Ton Tomco Liquid CO2 Storage Tank – Horizontal Carbon Steel Vessel with 350 PSI MAWP

Used- 30 Ton Tomco Liquid Carbon Dioxide Storage Tank. Horizontal. Carbon Steel construction. MAWP 350 psi. Pressure builder set at 240 psig. Economizer set at 300 psig. Serial #3088399. Approximate dimensions: 8' D x 35' L. Our freight specialists can assist with door to door trucking, and any customs documentation to ensure a smooth transition.

MFR: Tomco

Used EnviroStar ES 500 Centrifugal Spray Dryer – Stainless Steel, PLC Controlled

Used EnviroStar Centrifugal Spray Dryer, Model ES 500. Stainless steel. Drying capacity up to 2.0 kg per hour. Inlet temperature 350 degrees F. Pneumatic: 5 CFM @ 45 PSI, Atomizer Cooling Water: 1/4" Poly Line @ 1 LPM. Includes rotary atomizer, Vacuum exhaust blower with collection cyclone, High efficiency collection cyclone with integrated lighting and inspection ports. Allen Bradley PLC and HMI. Integrated HEPA inlet air filtration, Electrical: Dryer main power 208/240V, 3Ph, 54A 50/60Hz. Peristaltic pump: 110V 2A or 220V 1A 50/60Hz. 304 stainless steel construction. FDA-compliant design and UL certified.

Used Sinoped LPG-5 Spray Dryer – High-Speed 25,000 RPM Food-Grade Powder Drying System (2023)

Used- Sinoped Spray Dryer, Model LPG-5. 5 kg/hour (approx. 11 lbs./hour) evaporated capacity. Approx. 3.94' diameter x 9.19' height chamber size. 25,000 RPM rotating speed. 18 kW electrical heater. 3/60/208V. Built 2023. Previously used for food/beverage emulsion powder.

Friedrich Industrial Ovens (Qty 2) – Process Heating Ovens Lot

Qty. (2) used Friedrichs ovens offered as one lot. Oven components are located at two locations, with parts stored at Rick's Shop and the main oven located at a rigging company. Lot includes only (1) control cabinet and (1) stainless steel exhaust system to be shared with the two-oven package. Possible applications and suitable products include industrial heating, drying, curing, or other compatible oven-processing applications.

New Sweco 30” Diameter Screens – Lot of Vibratory Separator Screens (Various Mesh Sizes)

New/ Unused Sweco Parts. Lot of 30" Diameter Screens with various mesh sizes.

MFR: Sweco

Used Press Technologies 120-WT Twin Wire Wedge Thickener | 10’ Belt Sludge Dewatering System

Used- Press Technologies Twin Wire Wedge Thickener, Model 120-WT. 10' wide belt. Uses (2) 40 HP dual press drive motors. Utilizes (2) 12'' wide filtrate drain troughs. Pulp is discharged through 25 HP screw conveyor. Includes all associated electrical components, transformers, pumps, motors, and valves.

MFR: Press Technology

Used DCI 50,000 Gallon Stainless Steel Silo | Vertical Dairy & Water Storage Tank

Used DCI Silo, 50,000 Gallon, Stainless Steel, Vertical. Approximately 12' 6" diameter x Overall height of 50'. Last stored water and before that, milk. Wt. Approximately 35,000 lbs. Need to confirm. Serial# 95-D-51150.

MFR: DCI

Used Crepaco 50,000 Gallon Stainless Steel Silo | Vertical Dairy & Water Storage Tank

Used Crepaco Silo, 50,000 Gallon, 11' 6" Diameter x 70' Long. Vertical, Slight crinkle on top head (inside). Vessel is in good working condition. Last held water and before that milk. Approximately 35,000 lbs.

MFR: Crepaco

Unused Goulds 3196 316 Stainless Steel ANSI Centrifugal Pump

Unused Goulds 3196 ANSI centrifugal pump, size 1.5 x 3-6, with 316 stainless steel construction, 316 stainless steel shaft, shaft sleeve, and seal gland. Pump features flood-oil lubrication, a Rexnord ES-e coupling, aluminum non-sparking coupling guard, and cast-iron baseplate. Driven by a 7.5 HP, 3,600 RPM, 3-phase, 60 Hz, 230/460-volt explosion-proof P.E. motor with Class F insulation and 1.15 service factor. Rated operating condition is 150 GPM at 40 pounds per square inch for Ethanol SDA 40B - 200.

MFR: Goulds

Goulds 3196 1.5 x 3-6 Stainless Steel Process Pump

Unused Goulds 3196 ANSI centrifugal pump, size 1.5 x 3- 6, featuring 316 stainless steel construction, 316 stainless steel shaft, shaft sleeve, and seal gland. Equipped with flood-oil lubrication, Rexnord ES-e coupling, aluminum non-sparking coupling guard, and cast-iron baseplate. Driven by a 7.5 HP, 3,600 RPM, 3-phase, 60 Hz, 230/460-volt explosion-proof P.E. motor with Class F insulation and a 1.15 service factor. COS: 100 GPM at 40 pounds per square inch for Ethanol SDA 40B - 200.

MFR: Goulds