Adhesive and Sealant Equipment
Stock No.:
48291047Buy Unused Shell & Tube Heat Exchanger – TEMA AEU, Carbon Steel, Horizontal
Shell & Tube Heat Exchanger, Unused- 4 Pass U Tube. Approximate 3409 Square Feet, Tema Type AEU, Carbon Steel, Horizontal. Shell rated 369psi/Full Vacuum at 392 degrees F., (368) 3/4" diameter x 288" long tubes rated 364psi/Full Vacuum at 320 degrees F. Openings shell (2) 4", (2) 8", openings for tubes (2) 2", (2) 6". Mfg: Ilsung Corporation. Serial# 14-HE-075, National Board# 2059, built 2015. OAD 358"L X 44"W X 82"T, 27313 lbs. Documents available. Nitrogen purged by manufacturer after testing and prior to storage.
MFR: Ilsung Corporation
Stock No.:
48291060Shell & Tube Heat Exchanger, 4 Pass U Tube, Unused
Unused- 4 Pass U Tube Shell & Tube Heat Exchanger, Approximate 3409 Square Feet, Tema Type AEU, Carbon Steel, Horizontal. Shell rated 369psi/Full Vacuum at 392 degrees F., (368) 3/4" diameter x 288" long tubes rated 364psi/Full Vacuum at 320 degrees F. Openings shell (2) 4", (2) 8", openings for tubes (2) 2", (2) 6". Mfg: Ilsung Corporation. Serial# 14-HE-076, National Board# 2060, built 2015. OAD 358"L X 44"W X 82"T, 26609 lbs. Documents available. Nitrogen purged by manufacturer after testing and prior to storage.
MFR: Ilsung Corporation
Stock No.:
48291061Shell & Tube Heat Exchanger, Unused- U Tube
Unused- 4 Pass U Tube Shell & Tube Heat Exchanger, Approximate 3409 Square Feet, Tema Type AEU, Carbon Steel, Horizontal. Shell rated 369psi/Full Vacuum at 392 degrees F., (368) 3/4" diameter x 288" long tubes rated 364psi/Full Vacuum at 320 degrees F. Openings shell (2) 4", (2) 8", openings for tubes (2) 2", (2) 6". Mfg: Ilsung Corporation. Serial# 14-HE-078, National Board# 2062, built 2015. OAD 358"L X 44"W X 82"T, 26609 lbs. Documents available. Nitrogen purged by manufacturer after testing and prior to storage.
MFR: Ilsung Corporation
Stock No.:
53393012Used – Horizontal, Carbon Steel, Aurora Industrial Machining Shell & Tube Heat Exchanger – 150 PSI
Used Horizontal Aurora Industrial Machining Shell & Tube Heat Exchanger, Approximately 343 square feet. Carbon steel (SA53B) Shell rated 150psi at -20 to 350 Degrees F. (262) 304 Stainless steel .625" diameter straight tubes rated 150psi at -20 to 350 Degrees F. Openings shell: 4" (inlet), 4" (outlet), 2" (relief), tubes: 10" (inlet), (3) 3/4" (vent/drain). National Board# 3056, Serial# 4142, built 1997.
MFR: Aurora
Stock No.:
51825001Onan 35 kW Natural Gas Generator Set: Reliable Standby Power Solution
Used- Cummins / Onan 35 kW Standby Natural Gas Generator Set, Model 35SJB, SN-L900363017. Chrysler model H135 engine, SN-K1142033, 3600rpm. Rated 35 kW, 3/60/277/480V 12 lead reconnectable to other voltages.. 60 Amp main-line circuit breaker. Hours 403. No enclosure.
MFR: Cummins/Onan
Stock No.:
10128091Used Krauss-Maffei MT 1/200 Vacuum Mixer Dryer – 316L SS | 49.43 cu.ft. | Full Vacuum | 10 HP Orbiting Screw
Used- Krauss Maffei Mixer Vacuum Dryer MT. Model MT 1/200. Serial # 7098. National Board # 21424. Constructed of 316L stainless steel. Interior has polished surface. Conical vessel has a capacity of 49.43 cuft with working volume of 35.3 cuft. Dryer uses an 8" diameter inclined orbiting screw, driven by a 10 hp drive to gently agitate product while drying. Can dry particles up to 5 mm in size. Vessel is rated for Full Vacuum/150 psi @ 450 f on jacket and internal. Acutal drying temperature maximum is 302 f. The top has an 18" manway with 6" sight glass, 18" flanged fitting, 4" sight glass, (2) 3" flanged fittings, (2) 2" flanged fittings, 6" flanged fittings and (2) 1" threaded fitting for the top jacket. The side has (2) 2" flanged fittings for the body jacket. The bottom has a 10" flanged discharge fitting with pneumatically operated flush mount valve and (2) 1" threaded fittings for bottom jacket.
MFR: Krauss Maffei
Stock No.:
54292001Buy Used Generac 350kW Standby Generator – 800A Breaker, Only 277 Hours
Used Generac 350 kW Standby Diesel Generator Set, Model SD0350-G36160D18GPSY, Mitsubishi 16L engine rated at 1800 RPM, Serial# 0A8829. Unit configured for 3/60/120/208V, 12 lead reconnectable to other voltages. 800 Amp main-line circuit breaker. Generac digital control panel. 24 Volt DC Battery Charger. Sound attenuated enclosure. 706 gallon UL listed sub-base fuel tank with secondary containment. 277 Hours. Serial# 2089404, Built 2006. Overall dimensions 200"L x 58"W x 118"T.
MFR: Generac
Stock No.:
54377001Used Ingersoll-Rand H300 Skid-Mounted Rotary Screw Air Compressor – 1264 CFM, 350 HP, Built 2014
Used Ingersoll-Rand H300 Skid-Mounted Rotary Screw Air Compressor 1264 CFM, 350 HP, Built 2014. Rated operating pressure 125 psig. Maximum pressure rating 128 psig. 350 HP drive motor. 3 phase, 60 Hz. 4000V/460V. Approximately 20,200 hours.
MFR: Ingersoll-Rand
Stock No.:
54377002Ingersoll-Rand H300 Industrial Rotary Screw Air Compressor – 1264 CFM, 350 HP Skid Mounted System
Ingersoll-Rand H300 Industrial Rotary Screw Air Compressor 1264 CFM, 350 HP Skid Mounted System. Rated operating pressure 125 psig. Maximum pressure rating 128 psig. 350 HP drive motor. 3 phase, 60 Hz. 4000V/460V. Approximately 20,200 hours. Built 2014.
MFR: Ingersoll-Rand
Stock No.:
54377003Heavy-Duty Ingersoll-Rand H300 Rotary Screw Compressor – 350 HP, 1264 CFM Plant Air System
Heavy-Duty Ingersoll-Rand H300 Rotary Screw Compressor 350 HP, 1264 CFM Plant Air System. Rated operating pressure 125 psig. Maximum pressure rating 128 psig. 350 HP drive motor. 3 phase, 60 Hz. 4000V/460V. Approximately 20,200 hours. Built 2014.
MFR: Ingersoll-Rand
Stock No.:
54386001Used Generac SD350 Diesel Generator – 350 kW / 438 kVA with 2,000 Gallon Base Tank, Only 275 Hours
Used- Generac Diesel Generator, Model SD350. Rated 350kW, 438KVA. Weather Enclosure. Iveco/FPT engine power: 530 HP @1,800 RPM. 3/60/277/480V. Includes 2,000 gallon base tank. 275.4 hours, Serial# 7855510, Built 2013. Includes Square D Company 500 kVa transformer for 120V usage.
MFR: Generac
Stock No.:
54551001Used 2020 Caterpillar D3506C 350 kW Diesel Generator Set
Used 2020 Caterpillar 350 kW diesel generator set, model D3506C, powered by a CAT C13 diesel engine, serial number PW30188. Generator operates at 1800 RPM and is rated for 3-phase, 60 Hz, 480V electrical service. Unit has 779 operating hours and is equipped with a weather enclosure and sub-base fuel tank. Possible applications and suitable uses include standby or backup electrical power for industrial plants, manufacturing facilities, warehouses, commercial buildings, and other 480V 3-phase operations. Built 2020.
MFR: Caterpillar
