Adhesive and Sealant Equipment

Used Vacudyne Corporation tobacco conditioning unit.Fumigator. Serial # J71-53 . The unit uniformly adds or removes amounts of moisture to bulk products such as tobacco, starches, etc. This is accom...

Used-Vacudyne Corporation tobacco conditioning unit.Fumigator. Serial # J71-53 . The unit uniformly adds or removes amounts of moisture to bulk products such as tobacco, starches, etc. This is accomplished by added steam heat, evacuating using vacuum and repeating as necessary. Unit requires 130 psig steam , 460 vac 3 ph electric and 60 gpm 70f water supplies. Maximum steam temperature of 200f and a maximum of 25" hg vacuum. Unit is equipped with vacuum jet and steam condensing unit with 1 hp recirculating pump. The interior space measures 9' 3" long x 5' wide and 6' 6" tall. Unit is also equipped with hinged ramp at the door. Good condition.

Buy Used Ketema Shell & Tube Heat Exchanger – 3.2 Sq. Ft., High-Pressure Rated

Used- Ketema Shell & Tube Heat Exchanger, 3.2 Square Feet, Type MVHT-1-A-SS. (28) .375" diameter x 14" long 316 stainless steel tubes rated 300 psi and full vacuum at 650 degrees F. Carbon steel shell rated 150 psi at 400 degrees F. Size 4-Y-14. 1.5" tubes inlet/outlets, 1" shell inlet/outlets. Serial # WL-950429/2.

MFR: Ketema

Used Ketema MVHT-1-A-SS Shell & Tube Heat Exchanger – 3.2 Sq. Ft., 300 PSI

Used- Ketema Type MVHT-1-A-SS Shell & Tube Heat Exchanger, 3.2 Square Feet. (28) .375" Diameter x 14" long 316 stainless steel tubes rated 300 psi and full vacuum at 650 degrees F. carbon steel shell rated 150 psi at 400 degrees F, Size 4-Y-14. 1.5" tubes inlet/outlets, 1" shell inlet/outlets. Serial # WL-950429/A1,

MFR: Ketema

Used Great Western Manufacturing Type TB, Model 611/4 Tru-Balance Screener

Used- Great Western Manufacturing Tru-Balance Screener, Type TB, 30" Diameter, Model 611/4 (QA30), 304 Stainless Steel. Approximate 500 pounds per minute with wheat flour. Approximate 30" diameter, (4) sieves. Approximate net sieving area 15 square feet. Driven by a 1.5 HP, 3/60/230/460 volt, 1160 rpm motor. 5" top opening, bottom openings: 5", 4". Mounted on a painted carbon steel frame. Serial# 3882. Built 1999.

MFR: BF Gump

Used Bowen BLSA Laboratory Spray Dryer – 316 Stainless | 15–80 lb/hr | 1000°F Inlet | Atomizer | Complete System

Used- Bowen Engineering BLSA Laboratory Spray Dryer. 316 stainless steel. 30" (770 mm) diameter x 28" (720 mm) straight side x 30" (770 mm) coned bottom. Approximate evaporation rate 15-80 pounds (6.8-26.3 kgs) an hour. Atomizer. Air requirements 100 psi (6.66 bar), Inlet temperature range to 1000 degree F (537.77 degree C), side access door. Digital control panel mounted on unit. Mounted on stainless steel legs. Includes cyclone, collection jar, gas heater and blower, piping and additional infrastructure. Previous used in a Nutraceutical application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible

MFR: Bowen

Macon 30" Diameter Single Deck Stainless Steel Screener

Used- Macon Screener, 30" Diameter, 304 Stainless Steel. Single deck, 2 separation. No screen. Top clamp-on cover with 8" center inlet. Driven by a approximate 1/2hp, 3/60/460 volt, 1140 rpm motor. Mounted on a painted carbon steel base.

MFR: Macon

Used GEA Niro Mobile Minor Stainless Steel Laboratory Spray Dryer | Pilot-Scale | 1–7 kg/hr | Mobile Unit

Used GEA Niro Mobile Minor Stainless Steel Laboratory Spray Dryer | Pilot-Scale | 17 kg/hr | Mobile Unit. Approximate evaporation rate of 1-7 kg/hr. (2.2-15.4 Lbs./hr.) depending on product. Niro centrifugal air operated atomizer. Approx. 800 mm (31-1/2") diameter x 915 mm (36") straight side. Chamber is lagged and clad. Electric heater, cyclone, pipework and additional infrastructure. Mounted on mobile frame on wheels. Reported in good condition. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Niro

Sweco LS30S 30 Inch Circular Vibratory Screener - Used Stainless Separator

Used Sweco 30" Stainless Steel Double Deck Circular Vibratory Screener, Model LS30S. 30" diameter stainless steel construction, double-deck design providing 3 separations, and a 1/2 HP, 3 phase, 60 Hz, 230/460 volt, 1140 RPM motor. Mounted on a painted carbon steel base with casters for mobility. Serial number 589-74F. Designed for particle separation, grading, classification, sizing, scalping, and fines removal. Possible applications include screening and classifying powders, granules, dry bulk materials, and liquid-solid mixtures.

MFR: Sweco

Used 30 gallon Hoppes chemical reactor, 300 psi internal pressure @ 500 degrees F with 3 HP double helix with sweep agitator and 3HP DC-TENV motor 1750 RPM. 20" diameter x 21" straight side with body...

Used-30 gallon Hoppes chemical reactor, 300 psi internal pressure @ 500 degrees F with 3 HP double helix with sweep agitator and 3HP DC-TENV motor 1750 RPM. 20" diameter x 21" straight side with body flange. Glass Col 9 circuit electric jacket heat with 9 each 1,650 circuits. One 3" 300# RFSO with sight glass, one 3" 300# pad flange, three 2" 300# RFSO flnges, one 1" 3000# coupling, one 1" flush mount bottom ball valve., three 3000# couplings, and three 1/2" 3000# couplings. Tank on a stand. Material 316 stainless steel. ASME "U" stamped. National Board Number1759. Internal welds has #3 polish.

Used Coaire CAS30S24 30 HP Rotary Screw Air Compressor With Schulz Dryer

Used Coaire Model CAS30S24 oil-injected, fixed-speed rotary screw air compressor, Serial #SS030HG187, with Schulz Model ADS 125 non-cycling refrigerated compressed air dryer, Serial #210009427. The Coaire CAS S-Series is a fixed-speed industrial rotary screw compressor line featuring a high-efficiency motor and cooler with direct or gear drive. The CAS030S is rated at 30 HP, with published S-Series capacities ranging from 127 CFM at 100 psi, 124 CFM at 125 psi, and 111 CFM at 150 psi depending on configuration. Included Schulz ADS 125 refrigerated air dryer has a nominal capacity of 125 SCFM, 1-1/4" NPT-F inlet/outlet connections, 115V/1-phase/60 Hz electrical service, and an 88 lb net weight. The dryer is designed to remove moisture from compressed air before it reaches downstream equipment.

MFR: Coair

Used CMS Heat Transfer 30.3 Sq Ft 304L Stainless Steel Shell and Tube Heat Exchanger, Naphthalene Cooler

Used CMS Heat Transfer Division 30.3 Square Foot 304L Stainless Steel Horizontal Shell And Tube Heat Exchanger With 190 PSI Pressure Rating. Industrial shell and tube heat exchanger designed for liquid-to-liquid heat transfer, process cooling and industrial temperature control applications. Features approximately 30.3 square feet of heat transfer surface area with (12) straight tubes constructed of 304L stainless steel, each measuring 3/4" in diameter. Shell and tubes are constructed of 304L stainless steel and rated for a maximum allowable working pressure of 190 psi and full vacuum at temperatures ranging from -20 F to 400 F. Process connections include (2) 3" shell-side openings, (2) 3" tube-side openings and (4) 3/4" auxiliary nozzles. Originally designed as a naphthalene final cooler, Equipment Tag E-626. Manufactured by CMS Heat Transfer Division, Inc., Bohemia, New York, for Cincinnati Heat Exchangers. Serial #3194.8. National Board #2251. Possible applications include industrial process cooling, naphthalene cooling, chemical processing, liquid-to-liquid heat exchange, solvent cooling, circulating water systems, heat recovery and temperature control of other compatible chemical and industrial process fluids.

Used Trans Food Tech Pre-Mixing System | 300 Gallon Skid-Mounted Mixer

Used Trans Food Tech Pre-Mixing System | 300 Gallon Skid-Mounted Mixer. 41" straight side x 45" diameter tank dimensions, flat bottom. Scrape agitation. Has SPX product pump. With stainless steel electrical control cabinet. Mounted on skid. Built 2018.

MFR: Trans-Tech