Adhesive and Sealant Equipment

Clear
https://images.aaronequipment.com/ItemImages/Evaporators/Wipe-Film-Thin-Film/Luwa-LN-0012-B_10128124_aa.jpg

Stock No.:

10128124

Used Luwa LN-0012 B Vertical Thin Film Evaporator Package | 1.4 Sq. Ft. Wiped Film Evaporator

Used Luwa LN-0012 B Vertical Thin Film Evaporator Package | 1.4 Sq. Ft. Wiped Film Evaporator. The internal rating is for ATM to full vacuum. The jacket is rated at 245 psig @ 350C. The total volume of the evaporator is .166 cuft. It is equipped with 1.5 hp motor. All components are mounted on a painted carbon steel frame. Requires 230/460 vac 3 phase electrical supply. Serial number 0012/83.

MFR: Luwa

https://images.aaronequipment.com/ItemImages/Generators/Cogeneration/Caterpillar-CG170-16_50477001_aa.jpg

Stock No.:

50477001

Unused- Caterpillar Cogeneration Natural Gas Generator System, 1.5 MW.

Unused- Caterpillar Cogeneration Natural Gas Generator System, 1.5 MW, Permanent. Caterpillar Model CG170-16 Natural Gas Engine Rated at 1556 kW, 4160 V, 3 Phase, 60 Hz at 0.8 Power Factor. Pritchard Brown Enclosure, Cannon Boiler, Boulden Radiator, WHR System, Stueler SCR System to be Installed Outside of the Enclosure, Caterpillar ISO Auxiliary Cabinet. Built 2017.80 hours of Engineering Support to site at customers location. U.S.A. locations only.

MFR: Caterpillar

https://images.aaronequipment.com/ItemImages/Compressors/Recipricating-Gas-High-Pressure/Great-Lakes-GN2-1800C11-XP2_54408001_aa.jpeg

Stock No.:

54408001

Used Great Lakes Air GN2-1800C11-XP2 Nitrogen Generator System – 3,745 SCFH, 99.5% Purity with Air Dryer & Tanks

Used- Great Lakes Air Package Nitrogen Generator, Model GN2-1800C11-XP2, Serial #42118. Rated capacity of 3,745 SCFH. Produces Nitrogen at 99.5% purity. Inlet pressure of 110 PSIG. Minimum inlet piping size 2''. Unit includes (2) Penway Inc. air receiver tanks rated at 150 psi at 450 degrees F, National Board #34983, 34984. (2) Manchester Tank 400 gallon tanks rated 200 psi at 450 degrees F. Refrigerated Air Dryer, Model GRF-250A-436, Serial #41822, 3/60/460V. Refrigeration compressor 1.5 HP. R404a refrigerant type. Built 2013. Overall dimensions: 85'' wide x 125'' long x 117'' tall.

MFR: Great Lakes

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Double-Cone-V-Rotary-Vacuum/Paul-O-Abbe-RCVD-11_53128001_aa.jpg

Stock No.:

53128001

Unused Paul O. Abbe Model RCVD 1.1 Sanitary Rota-Cone Vacuum Dryer – 1.7 Cu. Ft.

Unused- Paul O. Abbe (Certified by DCI Inc.) Model RCVD 1.1 Sanitary Rota-Cone Vacuum Dryer. Working capacity. 1.7 Cubic Foot, Total Capacity (12 Gallon). Type 316L Stainless Steel Construction. 18" Inside Diameter Shell that is Electropolished. Sanitary 6" Inlet with Gasketed Cover and 3" Sanitary Outlet, No Valve. Internal Rated 35 PSI/Full Vacuum @ 300 Degrees F. MDMT is -20 Degrees F @ 35 PSI/Full Vacuum. Type 304 Stainless Steel Jacket rated 45 PSI/Full Vacuum @ 300 Degrees F. MDMT is -20 Degrees F @ 45 PSI/Full Vacuum. Jacket Volume is 2-gallon capacity. Vessel is Insulated with 1" Chloride Free Insulation with 316L SS Shroud. National Board, ASME & U Stamped. Includes Stainless Steel Hp TEFC Motor, 400 Volt, 3/50. CE Certified. Hollow Bore Gear Motor. Approx. 8 RPM Output Speed, mounted through Aluminum Frame Gear Reducer at 188.5/1 Ratio. 304 Stainless Steel Tubular Legs and Base. Includes Internal Sanitary Vacuum Line, Gas Purge and RTD Probe. Stainless Steel Rotary Unions. Includes Brake Motor with Inverter, and Positioning Disc. Does Not Include Control Panel. Drawings and Manual are available. Serial Number JS7845A, Built in 2020. Built for a Pharmaceutical Company in the UK and it was NEVER USED. Still in storage in the UK. Ready for Shipment. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Double-Cone-V-Rotary-Vacuum/Paul-O-Abbe-RCVD-11_53128002_aa.jpg

Stock No.:

53128002

Unused Paul O. Abbe Sanitary Rota-Cone Vacuum Dryer – Model RCVD 1.1 | 316L Stainless Steel

Unused- Paul O. Abbe (Certified by DCI Inc.) Sanitary Rota-Cone Vacuum Dryer, Model RCVD 1.1, 316L Stainless Steel. Working capacity. 1.7 Cubic Foot, Total Capacity (12 Gallon). Type 316L Stainless Steel Construction. 18" Inside Diameter Shell that is Electropolished. Sanitary 6" Inlet with Gasketed Cover and 3" Sanitary Outlet, No Valve. Internal Rated 35 PSI/Full Vacuum @ 300 Degrees F. MDMT is -20 Degrees F @ 35 PSI/Full Vacuum. Type 304 Stainless Steel Jacket rated 45 PSI/Full Vacuum @ 300 Degrees F. MDMT is -20 Degrees F @ 45 PSI/Full Vacuum. Jacket Volume is 2-gallon capacity. Vessel is Insulated with 1" Chloride Free Insulation with 316L SS Shroud. National Board, ASME & U Stamped. Includes Stainless Steel Hp TEFC Motor, 400 Volt, 3/50. CE Certified. Hollow Bore Gear Motor. Approx. 8 RPM Output Speed, mounted through Aluminum Frame Gear Reducer at 188.5/1 Ratio. 304 Stainless Steel Tubular Legs and Base. Includes Internal Sanitary Vacuum Line, Gas Purge and RTD Probe. Stainless Steel Rotary Unions. Includes Brake Motor with Inverter, and Positioning Disc. Does Not Include Control Panel. Drawings and Manual are available. Serial Number JS7845A, Built in 2020. Built for a Pharmaceutical Company in the UK and it was NEVER USED. Still in storage in the UK. Ready for Shipment. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Feeders/Rotary-Airlock/Nu-Con-Engineering-DT-750-EDEM_45053461_ac.jpg

Stock No.:

45053461

Unused GEA Nu-Con DT750 Rotary Airlock Valve – Stainless Steel Sanitary Design

Unused GEA Nu-Con Rotary Sanitary Air-Lock Valve, Model DT750 EDEM. Material of construction: SS SS ICS. Serial# 2871755. No drive.

MFR: Nu-Con Engineering

https://images.aaronequipment.com/ItemImages/Feeders/Rotary-Airlock/Nu-Con-Engineering-DT-750-DEM_45053462_ae.jpg

Stock No.:

45053462

Unused GEA Nu-Con DT 750 DEM Sanitary Rotary Airlock Valve with Gearmotor

Unused GEA Nu-Con Rotary Stainless Steel Air-Lock Valve, Model DT 750 DEM. Material of construction: SS SS ICS. Includes .75kW drive. Serial# 61510952.

MFR: Nu-Con Engineering

https://images.aaronequipment.com/ItemImages/Feeders/Rotary-Airlock/Nu-Con-Engineering-DT-750-DEM_45053463_ae.jpg

Stock No.:

45053463

Sanitary Rotary Airlock Valve GEA Nu-Con DT 750 DEM with Variable Speed Gearmotor

Unused GEA Nu-Con Sanitary Rotary Air-Lock Valve, Model DT 750 DEM. Material of construction: SS SS ICS. Includes .75kW, 3/60/230/460 volt, 300-1800 gearmotor drive. Serial# 61510953.

MFR: Nu-Con Engineering

https://images.aaronequipment.com/ItemImages/Feeders/Rotary-Airlock/Nu-Con-Engineering-DT-750-DEM_45053465_ac.jpg

Stock No.:

45053465

Unused GEA Nu-Con DT 750 DEM Rotary Airlock Valve – Stainless Steel (No Drive)

Unused GEA Nu-Con Model DT 750 DEM Rotary Air-Lock Valve. Material of construction: SS SS ICS. Serial# 61510954. No drive.

MFR: Nu-Con Engineering

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Fluid-Bed-Dryer/Niro-CC-21T_48962017_aa.jpg

Stock No.:

48962017

Used Niro CC 21T Fluid Bed Dryer/Coater – 10 kg Batch | AISI 304 Stainless | Tablet Coater | Watson-Marlow Pump

Used- Niro Type Fluid Bed Dryer/Coating Pan, type CC 21T. Material of construction is AISI 304 (1.4301) Stainless steel on product contact parts. Working capacity of 10 kg (22 lbs) per batch. Complete with Watson Malow pump, operating panel, control panel and additional infrastructure. Previously used in a Pharma application to coat tablets. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Niro

https://images.aaronequipment.com/ItemImages/Kettles/Stainless-Steel-0-499-Gallon/Groen-TDH-40_53043001_aa.jpg

Stock No.:

53043001

Used Groen TDH-40 Table Top Kettle – 40 Quart, Gas-Heated, Steam Jacketed

Used- Groen Table Top Kettle, Model TDH-40, 40 Quart Capacity, Stainless Steel. Approximate 16-1/2" diameter x 14" deep. Self-contained steam jacketed unit with natural gas heated steam source contained within unit. Input rated 52,000 btu / hr. 2/3 bottom jacket rate 50 psi at 300 degrees F. Manual tilting with pour lip. Mounted on a base. National Board# 12100, Serial# 1988-10.

MFR: Groen

https://images.aaronequipment.com/ItemImages/Kettles/Stainless-Steel-0-499-Gallon/Groen-TDH-40_53043002_aa.jpg

Stock No.:

53043002

Commercial Tabletop Kettle for Sale – Groen TDH-40, Natural Gas Heated

Used- Groen Model TDH-40 Table Top Kettle, 40 Quart Capacity, Stainless Steel. Approximate 16-1/2" diameter x 14" deep. Self-contained steam jacketed unit with natural gas heated steam source contained within unit. Input rated 52,000 btu / hr. 2/3 bottom jacket rate 50 psi at 300 degrees F. Manual tilting with pour lip. Mounted on a base. National Board# 13816, Serial# 1989-4. 1/60/110 Volt.

MFR: Groen

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.