hit counter
AARON’S FAMILY OF COMPANIES

Your Files Are Being Processed

70% Complete

Please Wait

Surplus Equipment used to Manufacture ABS

Liquidation-ABS.jpg

Sale Details:

Start Date:
July 25, 2018

End Date:
December 31, 2018

Location:
Ottawa, IL

Preview Information:
Call to Schedule an appointment

Sale Contact:
Bob Perna
bperna@aaronequipment.com
630-350-2200

Partner:



Surplus Equipment used to Manufacture ABS (Acrylonitrile Butadiene Styrene) including: Volumetric Screw Feeders, Stainkless Steel Screw Feeders, Banbury Mixers, Single Screw Dump Extruders, Two Roll Mills and More...

View Items:

15 Items

Enter to Search

Used- Vibra Screw 304 Stainless Steel Screw Feeder.

Stock# 49118001

Used- Vibra Screw Screw Feeder, 304 Stainless Steel. Approximate capacity 1480 cubic feet per hour. Approximate 10" diameter x 82" long screw, maximum 100 rpm. End feed hopper, enclosed tube, end bottom outlet. Driven by a 3 hp, 3/60/230/460 volt, 1735 rpm gear motor, ratio 18.5 to 1. Mounted on a carbon steel base. Serial# 8516 more info...

Used- Vibra Screw 304 Stainless Steel Screw Feeder.

Stock# 49118002

Used- Vibra Screw Screw Feeder, 304 Stainless Steel. Approximate capacity 1480 cubic feet per hour. Approximate 10" diameter x 144" long screw, maximum 100 rpm. End feed hopper, enclosed tube, end bottom outlet. Driven by a 3 hp, 3/60/208-230/460 volt, 1715 rpm gear motor, ratio 18.5 to 1. Mounted on a carbon steel base. Serial# more info...

Used- MetalFab Volumetric Screw Feeder, Model DB2-6, 304 Stainless Steel. Approximate maximum feed rate 500 cubic feet per h...

Stock# 49118003

Used- MetalFab Volumetric Screw Feeder, Model DB2-6, 304 Stainless Steel. Approximate maximum feed rate 500 cubic feet per hour. Approximate 6” diameter x 102” long screw. End feed hopper, enclosed tube, end bottom outlet. Driven by a 3hp, 3/60/460 volt, 1765 rpm motor. Mounted on a carbon steel base. Serial# 91358.

Used- MetalFab Volumetric Screw Feeder, Model DB2-6, 304 Stainless Steel. Approximate maximum feed rate 500 cubic feet per h...

Stock# 49118004

Used- MetalFab Volumetric Screw Feeder, Model DB2-6, 304 Stainless Steel. Approximate maximum feed rate 500 cubic feet per hour. Approximate 6” diameter x 96” long screw. End feed hopper, enclosed tube, end bottom outlet. Driven by a 1.5hp, 3/60/208-230/460 volt, 1725 rpm gear motor, ratio 11 to 1. Mounted on a carbon steel base more info...

Used- Vibra Screw 304 Stainless Steel Screw Feeder.

Stock# 49118005

Used- Vibra Screw Screw Feeder, 304 Stainless Steel. Approximate capacity 740 cubic feet per hour. Approximate 8" diameter x 128" long screw, maximum 100 rpm. End feed hopper, enclosed tube, end bottom outlet. Driven by a 3 hp, 3/60/230/460 volt, 1735 rpm gear motor, ratio 18.5 to 1. Mounted on a carbon steel base. Serial# 85166 more info...

Used- Vibra Screw 304 Stainless Steel Screw Feeder.

Stock# 49118006

Used- Vibra Screw Screw Feeder, 304 Stainless Steel. Approximate capacity 740 cubic feet per hour. Approximate 8" diameter x 68" long screw, maximum 100 rpm. End feed hopper, enclosed tube, end bottom outlet. Driven by a 3 hp, 3/60/460 volt, 1765 rpm gear motor, ratio 18.5 to 1. Mounted on a carbon steel base. Serial# 851661.

Used- Farrel Banbury Mixer, Model 9D. Approximate chamber gross volume 182 liters (48 gallons, 11,120 cubic inches), approxi...

Stock# 49118007

Used- Farrel Banbury Mixer, Model 9D. Approximate chamber gross volume 182 liters (48 gallons, 11,120 cubic inches), approximate compound capacity 390 pounds. Jacketed chrome plated sides and door top, (2) chrome plated cored wing rotors, temperature range 80 to 200 degrees F. Ram feed with hopper, drop door discharge design. Dr more info...

Used- Farrel Banbury Mixer, Model F80. Approximate chamber gross volume 80 liters (21 gallons, 4,480 cubic inches), approxim...

Stock# 49118008

Used- Farrel Banbury Mixer, Model F80. Approximate chamber gross volume 80 liters (21 gallons, 4,480 cubic inches), approximate compound capacity 132 pounds. Jacketed chrome plated sides and door top, (2) chrome plated cored wing rotors, temperature range 80 to 200 degrees F. Ram feed with hopper, drop door discharge design. Dri more info...

Used- Farrel Banbury Mixer, Model 1D. Approximate chamber gross volume 16.5 liters (4.3 gallons, 978 cubic inches), approxim...

Stock# 49118009

Used- Farrel Banbury Mixer, Model 1D. Approximate chamber gross volume 16.5 liters (4.3 gallons, 978 cubic inches), approximate compound capacity 116 pounds. Jacketed chrome plated sides and door top, (2) chrome plated cored wing rotors, temperature range 80 to 200 degrees F. Ram feed with hopper, drop door discharge design. Dri more info...

Used- Crown / CDL Technology 12" Single Screw Dump Extruder, Model RPU2E400. Approximate 10 to 1 L/D ratio. Electrically hea...

Stock# 49118010

Used- Crown / CDL Technology 12" Single Screw Dump Extruder, Model RPU2E400. Approximate 10 to 1 L/D ratio. Electrically heated, water cooled 4 zone non-vented barrel with a closed loop system with pump, tank and heat exchanger. Water cooled feed throat with ram feeder, approximate 48" centerline height. Driven by a 500hp, 500 v more info...

Used- Crown / CDL Technology 12" Single Screw Dump Extruder, Model RPU2E400. Approximate 10 to 1 L/D ratio. Electrically hea...

Stock# 49118011

Used- Crown / CDL Technology 12" Single Screw Dump Extruder, Model RPU2E400. Approximate 10 to 1 L/D ratio. Electrically heated, water cooled 4 zone non-vented barrel with a closed loop system with pump, tank and heat exchanger. Water cooled feed throat with ram feeder, approximate 48" centerline height. Driven by a 500hp, 500 v more info...

Used- EEMCO Erie Machine & Manufacturing Horizontal Two Roll Mill, Model 14" x 14" x 30". (2) 14" Diameter x 30" wide carbon...

Stock# 49118012

Used- EEMCO Erie Machine & Manufacturing Horizontal Two Roll Mill, Model 14" x 14" x 30". (2) 14" Diameter x 30" wide carbon steel cored rolls, approximate speeds at 720 rpm input- rear fast drive roll 28.4 rpm (104.6 feet per minute), front slow driven roll 22.9 rpm (83.8 feet per minute), friction ratio 1.24 to 1. Driven by a more info...

Used- MetalFab Volumetric Screw Feeder, Model DB2-6, 304 Stainless Steel. Approximate maximum feed rate 500 cubic feet per h...

Stock# 49118014

Used- MetalFab Volumetric Screw Feeder, Model DB2-6, 304 Stainless Steel. Approximate maximum feed rate 500 cubic feet per hour. Approximate 6” diameter x 102” long screw. End feed hopper, enclosed tube, end bottom outlet. Driven by a 3hp, 3/60/460 volt, 1765 rpm motor. Mounted on a carbon steel base. Serial# 91358.

Used- MetalFab Volumetric Screw Feeder, Model DB1-4, 304 Stainless Steel. Approximate maximum feed rate 175 cubic feet per h...

Stock# 49118015

Used- MetalFab Volumetric Screw Feeder, Model DB1-4, 304 Stainless Steel. Approximate maximum feed rate 175 cubic feet per hour. Approximate 4” diameter x 52” long screw. End feed hopper, enclosed tube, end bottom outlet. Driven by a 1hp, 3/60/230/460 volt, 1745 rpm motor. Mounted on a carbon steel base. Serial# 892068.

Used- MetalFab Volumetric Screw Feeder, Model DB1-4, 304 Stainless Steel. Approximate maximum feed rate 175 cubic feet per h...

Stock# 49118016

Used- MetalFab Volumetric Screw Feeder, Model DB1-4, 304 Stainless Steel. Approximate maximum feed rate 175 cubic feet per hour. Approximate 4” diameter x 52” long screw. End feed hopper, enclosed tube, end bottom outlet. Driven by a 1hp, 3/60/230/460 volt, 1745 rpm motor. Mounted on a carbon steel base. Serial# 892068.

Cash Icon
Surplus Equipment?

We pay "Top Dollar" for your idle process equipment! Fill out our form and our buying team will get back to you.

SELL YOUR EQUIPMENT
Search Icon
Browse Inventory

View our entire process equipment inventory online or visit our location for an equipment inspection.

View Inventory
Phone Icon
Contact Us

Email or call us to speak with an equipment specialist to answer any machinery questions you may have.

630-350-2200