Biofuels - Ethanol Pilot Plant Liquidation

Stock# 50388016

Used KWS Manufacturing Enclosed Tube Screw Conveyor, Model 14DIAX18-OLG. 304 Stainless Steel, Horizontal. 14" Diameter x 216" long x approximate 3" pitch screw, approximate 8.1 screw rpm. Designed to convey 11 cubic feet per hour of 60 pounds per cubic foot material. Jacketed trough rated 247 psi at -20 to 392 degrees F. Driven by a 1 hp, 3/60/230/460 volt, 1650 rpm gear motor, ratio 204.42 to 1. Mounted on a saddles. Serial # 0085552.

Stock# 50388017

Used A&B Process Systems Reactor. Approximate 400 Gallon, 304L Stainless Steel, Vertical. 54" Diameter x 24" straight side, Dished top, jacketed hemispherical bottom. Internal rated 150 psi at -20 to 425 degrees F. 304L stainless steel jacket rated 150 psi at -20 to 425 degrees F. Off center top entering angled anchor agitator with scrapers, driven by a 10 hp, 3/60/230/460 volt, 1770 rpm gear motor, ratio 40.80 to 1. Openings top: 18" man way with davit arm cover. 4" Center bottom outlet. Mounted on (3) side lugs. Serial # 1118160301B. National Board #1606. Built 2012.

Stock# 50388092

Used Custom Built Continuous Mixer, Approximate 200 Cubic Feet, 304 Stainless Steel. Non-jacketed trough approximate 60" wide x 144" long x 60" deep. Approximate 8" diameter shaft with a single outer ribbon 3" wide x 3/8" thick, welded to 3" wide bars. Bolt on top cover with openings, end bottom outlet. Driven by a 3hp, 3/60/230/460 volt, 1735 rpm gear motor.

Stock# 50388105

Used IKA Works Inline Dispax Reactor. Mixing/Homogenizing/Dispersing, Model MHD/DR-PB 20. Nominal flow rate 30 gallons per minute, solids capacity 6200 pounds an hour. Driven by a 50 hp, 3/60/460 volt, 3535 rpm motor. 4" Solid inlet, 3" liquid inlet, 2" outlet. Unit mounted on a base Part # P015897. Serial # 2603-12.

Stock# 50388107

Used IKA Works Dispax Reactor High Shear Inline Disperser, Model DR 2000/10, Stainless Steel. Nominal flow rate 35 gallons per minute (8,000 l/h), nominal tip speed 4500 feet per minute. Driven by a 30hp, 3/60/230/460 volt, 3525 rpm motor. 2" Inlet & outlet. Unit mounted on a base. Part# P015742. Serial # 2599-12.

Stock# 50388113

Unused- IKA Colloid Mill, Model MK 2000/50. Nominal flow rate 350 gallons per minute, maximum flow rate 60,000 l/h, nominal tip speed 23 meters per second. Driven by a Siemens 150hp Motor. 480 Volt, 1785 rpm. Serial# 2758-16

Stock# 50388115

Unused- IKA Works Inline Colloid Mill, Model MK 2000/50. Nominal flow rate 350 gallons per minute, maximum flow rate 60,000 l/h, nominal tip speed 23 meters per second. Driven by a 150hp, 3/60/460 volt, 1785 rpm motor. 8" Inlet, 6" outlet. Unit mounted on a base. Part# P016866, serial# 2756-16.

Stock# 50388116

Unused- IKA Works Model MK 2000/50 Inline Colloid Mill. Nominal flow rate 350 gallons per minute, maximum flow rate 60,000 l/h, nominal tip speed 23 meters per second. Driven by a 150hp, 3/60/460 volt, 1785 rpm motor. 8" Inlet, 6" outlet. Unit mounted on a base. Part# P016866, serial# 2757-16.

Stock# 50388117

Used IKA Works Model MK 2000/50 Stainless Steel Inline Colloid Mill. Rotor speed 1265 RPM. Max throughput 80,000 L/hr. Driven by 150hp, 3/60/460 Volt, 1785 rpm TEFC Motor. 8" Inlet, 6" outlet. Flowserve 6L mechanical seal reservoir. Mounted on a painted carbon steel base. No Serial# plate. Current parts machine, can be completed for additional cost.