hit counter
Skip to main content

Your Files Are Being Processed

70% Complete

Please Wait

Cart
View Your Price Quote

Enter your Quote ID and Email address to view your price quote.

Used Machine Tools

Below is Aaron's inventory of unused and used machine tools.

29 Machine Tools

Enter to Search

Unused Cosen SV-1100 Semi-Automatic Traveliong-Table Vertical Band Saw

Unused Cosen SV-1100 Semi-Automatic Traveliong-Table Vertical Band Saw

Stock# 52572001

Unused- Cosen Semi-Automatic Traveliong-Table Vertical Band Saw. Model SV-1100, 43" x 43", New 2014, EQUIPPED WITH: Control Panel, Semi-Automatic Hydraulically Traversing Table, Hydraulic Blade Tension, Automatic Blade Breakage Detection, Roller Bearing Guides. CATALOG SPECIFICATIONS: Throat Depth 43" 1100 MM, Height Capacity, Maximum 43" 1100 MM, Table Dimensions, L x W 96.5" x 65", Table Dimensions, L x W 2450 MM x 1650 MM, Table Feed, Length 25.6" 650 MM, Table Load Capacity 17361 LBS 7875 KG, Workbed Height 58.3" 1482 MM, Blade Length 346" 8800 MM, Blade Width 1.6" 41 MM, Blade Thickness 0.05" 1.3 MM, Blade Speeds, Inf. Variable 1500 to 6000 FPM, Blade Speeds, Inf. Variable 450 to 1800 MPM, Blade Motor, Horsepower 20 HP 15 KW, Hydraulic Motor, Horsepower 1 HP .75 KW, Coolant Motor, Horsepower 1/4 HP .186 KW, Floor Space Required, L x W 146" x 124", Overall, Height 169", Weight Approximately 8800 LBS 4000 KGNEVER BEEN USED, S/n SV1030012.

Type: Bandsaw Mfr: Cos
VIEW ITEM ADD TO CART

Used Weldomat AG CH3-2437 Contact Welding Machine – Dual Units | 600 Contacts/Min | Tape & Wire Welding

Used Weldomat AG CH3-2437 Contact Welding Machine – Dual Units | 600 Contacts/Min | Tape & Wire Welding

Stock# 52127002

Used Weldomat Automatic Contact Welding Machine with (2) Welding Units; Model AG CH3-2437;Suitable for welding solid and bimetal contacts off tape reel onto stip; Up to 600 contacts per minute; 300 contacts per welding unit; Horizontal tape fee; (2) welding units in machine; Tape width 1.20-3.50mm; tape height 0.30-1.00mm; cross section 0.05-2.60 square mm; round wire 1.00-2.20mm; range of contact length 0.60-3.50mm

Type: CNC Mfr: Weldomat
VIEW ITEM ADD TO CART

Used Haas CNC Horizontal Machining Center – Model EC-300

Used Haas CNC Horizontal Machining Center – Model EC-300

Stock# 49422025

Used Haas CNC Horizontal Machining Center, Model EC-300. 11.8" x 11.8" (300mm x 300mm) pallet size; 20" X-axis travel; 18" Y-axis travel; 14" Z-axis travel; 40 ATC tool magazine capacity; 8000 RPM spindle speed; CAT 40 spindle taper; Haas CNC controls; Full 4th axis pallet indexing; Chip conveyor; Through spindle coolant; Remote jog handle; Probe; Auxiliary coolant filter. Built 2012

Type: CNC Mfr: Haas
VIEW ITEM ADD TO CART

Used Haas CNC Vertical Machining Center – Model VF-2SS

Used Haas CNC Vertical Machining Center – Model VF-2SS

Stock# 49422026

Used Haas CNC Vertical Machining Center, Model VF-2SS. 30" X-axis travel; 16" Y-axis travel; 20" Z-axis travel; 12,000 RPM spindle speed; CAT 40 spindle taper; 30HP spindle motor; 24 ATC tool magazine capacity; Haas CNC controls; Chip auger chip removal; 4th axis ready; Standard coolant system; Rigid tapping; Remote jog handle; Renishaw Wireless Intuitive Probing System (WIPS) spindle orientation. Built 2006.

Type: CNC Mfr: Haas
VIEW ITEM ADD TO CART

Used CJRTec 100 Ton CNC Conveyor Beam Press – 63" x 50" Table | Die Mount System, Waste Recovery | 2015

Used CJRTec 100 Ton CNC Conveyor Beam Press – 63" x 50" Table | Die Mount System, Waste Recovery | 2015

Stock# 52522001

Used CJRTec 100 Ton CNC Conveyor Beam Press/Die Press; Extended Table 63" x 50"; 2 Roll Pre-Feed Stand; Waste Recovery Cart; Die Mounting System. Mfg. 2015.

Type: CNC Die Press Mfr: CJRTec
VIEW ITEM ADD TO CART

Used Mitsubishi 3718 LVP CO2 Laser – 4000W | 72" x 144" Cutting Table | Rotary Axis & Tube Cutting

Used Mitsubishi 3718 LVP CO2 Laser – 4000W | 72" x 144" Cutting Table | Rotary Axis & Tube Cutting

Stock# 52977001

Used Mitsubishi CO2 Laser, Model 3718 LVP, 4000 Watt. 72" wide x 144" long Cutting Exchange Tables Cutting Area. Rotary Axis for Tube cutting. Will cut .030" to 1" Mild Steel, .030" to 1/2" thick Stainless Steel. MSC Load/Unload System. Includes Accu Chiller, and Torrit exhaust system.

Type: CO2 Laser Mfr: Mitsubishi
VIEW ITEM ADD TO CART

Used Herr-Voss Coil Line Arbor with Coil Car – 10,000 lb Capacity | 18–24" Coil ID | Control Box Included

Used Herr-Voss Coil Line Arbor with Coil Car – 10,000 lb Capacity | 18–24" Coil ID | Control Box Included

Stock# 52733001

Used Herr-Voss Coil Line Arbor and Coil Car; 18-24" coil ID capability; 10,000 pound capacity, arbor moves back and forward to adjust for camber; Includes control box for Coil Car and Paper winder.

Type: Coil Car Mfr: Herr-Voss
VIEW ITEM ADD TO CART

Used Scotchman D08514-20M Ironworker – 85 Ton for Sale

Used Scotchman D08514-20M Ironworker – 85 Ton for Sale

Stock# 53040001

Used Scotchman Iron Worker. Model D08514-20M. 85 Ton. Punching capacity for 1-1/16" thru 1" (27mm thru 24mm), throat depth 14" (355mm). Punch stroke 3.2" (81mm). Special Tooling up to 4" max diameter. Rect. notcher 2" x 4" x 1/2" (50mm x 100mm x 12mm). Angle shear 6" x 6" x 1/2" (150mm x 150mm x 12mm). Has drive 10hp 3/60/208v motor. 20" Long blade. 3200psi air requirements. Light material can do 45 strokes per minute, heavy material 18 strokes per minute. Capacity for Mild steel 65,000 psi tensile. Serial# 1095M1007. 3/60/208 Volt, 29.6 Amp.

Type: D08514-20M Mfr: Scotchman
VIEW ITEM ADD TO CART

Unused Timesavers Model 1211-01-5 Multi-directional Rotary Abrasive Disc Deburring Machine

Unused Timesavers Model 1211-01-5 Multi-directional Rotary Abrasive Disc Deburring Machine

Stock# 52736004

Unused- Timesavers Multi-directional, Dry Process Rotary Abrasive Disc Deburring Machine, Model 1211-01-5. 14" Diameter rotary disc, 8" maximum width stock, 4" infeed loading area, 0-3" machine opening, 10-30 FPM A/C feed speed, 39" constant pass-line height. Includes: rotary disc; adjustable disc; 5 hp main drive motor; infeed stop bar; infeed and outfeed hold-down rolls; centralized control panel; hour meter; variable speed conveyor drive. U.L. listed control components, 500 CFM exhaust requirement, no compressed air usage required, driven by a 5 hp, 3/60/230 volt motor. Built 2019.

Type: Disc Deburring Machine Mfr: Timesaver
VIEW ITEM ADD TO CART

Unused Timesavers Model 1211-01-5 Dry Process, Multi-Directional Rotary Abrasive Disc Deburring Machine

Unused Timesavers Model 1211-01-5 Dry Process, Multi-Directional Rotary Abrasive Disc Deburring Machine

Stock# 52736005

Unused - Timesavers Dry Process, Multi-directional Rotary Abrasive Disc Deburring Machine, Model 1211-01-5. 14" diameter rotary disc, 8" maximum width stock, 4" infeed loading area, 0-3" machine opening, 10-30 FPM A/C feed speed, 39" constant pass-line height. Includes: rotary disc; adjustable disc; 5 hp main drive motor; infeed stop bar; infeed and outfeed hold-down rolls; centralized control panel; hour meter; variable speed conveyor drive. U.L. listed control components, 500 CFM exhaust requirement, no compressed air usage required, driven by a 5 hp, 3/60/230 volt motor. Built 2019.

Type: Disc Deburring Machine Mfr: Timesaver
VIEW ITEM ADD TO CART

Used Trumpf Trulaser 3040 CO2 Laser – 4000W | 4000mm x 2000mm | LoadMaster Automation | Built 2016

Used Trumpf Trulaser 3040 CO2 Laser – 4000W | 4000mm x 2000mm | LoadMaster Automation | Built 2016

Stock# 53518001

Used Trumpf CO2 Laser, Model Trulaser 3040 (L32). With Loadmaster automation. Rated at speeds of 100m/min; 4000mm x 2000mm laser working area; X= 4000 mm, Y= 2000 mm, Z = 115 mm; 4000 watt CO2 laser; Automatic longitudinal pallet change; Longitudinal conveyor; 17" color touch screen; Work space lighting; Position laser diode; Spray device; Pierce Line; Focus Line; Plasma Line; Cutting head; Lens line with condition check. Complete with dust collection and cooling unit. 3/60/480V. Built 2016.Unit is running under power. Can be seen in operation. Available immediately.

Type: Laser Mfr: Trumpf
VIEW ITEM ADD TO CART

Mazak Super Turbo X48 Hi-Pro Laser Cutting Machine - 2000W (Used, 1994)

Mazak Super Turbo X48 Hi-Pro Laser Cutting Machine - 2000W (Used, 1994)

Stock# 53420001

Used Mazak Super Turbo X48 Hi-Pro Laser Cutting Machines. 2000 Watt, Built in 1994 with 101,951 hours. Serial Number 110871.

Type: Laser Cutter Mfr: Mazak
VIEW ITEM ADD TO CART

Used High Performance Mazak Super Turbo X48 Hi-Pro Laser Cutting Machines.

Used High Performance Mazak Super Turbo X48 Hi-Pro Laser Cutting Machines.

Stock# 53420002

Used Mazak Super Turbo X48 Hi-Pro Laser Cutting Machines..2500 Watt, Built in 1998 with 83,144 hours. Serial Number 140119.

Type: Laser Cutter Mfr: Mazak
VIEW ITEM ADD TO CART

Mazak Super Turbo X48 Hi-Pro Laser Cutting Machines.

Mazak Super Turbo X48 Hi-Pro Laser Cutting Machines.

Stock# 53420003

Used Mazak Super Turbo X48 Hi-Pro Laser Cutting Machines..2500 Watt, Built in 1998 with 83,144 hours. Serial Number 140119.

Type: Laser Cutter Mfr: Mazak
VIEW ITEM ADD TO CART

Used Prima Platino 2040 5kW Laser Cutting Machine | 6'x12' Tables | Upgraded Optics & Controls

Used Prima Platino 2040 5kW Laser Cutting Machine | 6'x12' Tables | Upgraded Optics & Controls

Stock# 54053001

Used Prima Platino 2040 5kW Laser Cutting Machine with Laser Tube. 5,000 watt Laser capacity; 160" Y axis travel; 80" X axis travel; 6" z axis travel; 4,330 IPM rapid traverse; (2) Qty 6 x 12 (2m x 4m) table size; Primach 20L PC based CNC control. Equipped with: Laser tube up to 6 OD; Cantilever Flying Optic Laser Resonator; 5", 7.5" & 10" Focal Lens; Quick Pierce; Auto Focus; Programmable Assist Gas; Laser Piercing Monitor (LPM); Automatic Shut Off; Safe Impact Protection System; Chiller Unit; Duster Unit. New rack OI + LED screen in 2022 and new internal optics in 2023.

Type: Laser Cutting Machine Mfr: Prima Platino
VIEW ITEM ADD TO CART

Used Famar Tandem 200 Automatic CNC Lathe – High-Speed Precision Turning

Used Famar Tandem 200 Automatic CNC Lathe – High-Speed Precision Turning

Stock# 53417001

Used Famar Automatic CNC Lathe, Model Tandem 200. 150mm (5.9") max diameter; 140mm (5.5"); Working strokes: X x Z, 313mm (approximate 12.5") x 250mm (approximate 10"); 827mm X-axis total stroke; 90m/minute high speed; 60m/minute Z-axis fastest speed; 313mm X-axis motor torque, 250mm Z-axis motor torque.

Type: Lathe Mfr: Famar
VIEW ITEM ADD TO CART

Used Famar Automatic CNC Lathe – Tandem 200 for Sale

Used Famar Automatic CNC Lathe – Tandem 200 for Sale

Stock# 53417002

Used Famar Automatic CNC Lathe, Model Tandem 200. 150mm (5.9") max diameter; 140mm (5.5"); Working strokes: X x Z, 313mm (approximate 12.5") x 250mm (approximate 10"); 827mm X-axis total stroke; 90m/minute high speed; 60m/minute Z-axis fastest speed; 313mm X-axis motor torque, 250mm Z-axis motor torque.

Type: Lathe Mfr: Famar
VIEW ITEM ADD TO CART

High-Performance Famar Tandem 200 CNC Lathe

High-Performance Famar Tandem 200 CNC Lathe

Stock# 53417003

Used Famar Automatic CNC Lathe, Model Tandem 200. 150mm (5.9") max diameter; 140mm (5.5"); Working strokes: X x Z, 313mm (approximate 12.5") x 250mm (approximate 10"); 827mm X-axis total stroke; 90m/minute high speed; 60m/minute Z-axis fastest speed; 313mm X-axis motor torque, 250mm Z-axis motor torque.

Type: Lathe Mfr: Famar
VIEW ITEM ADD TO CART

Precision Used CNC Lathe – Famar Tandem 200

Precision Used CNC Lathe – Famar Tandem 200

Stock# 53417004

Used Famar Automatic CNC Lathe, Model Tandem 200. 150mm (5.9") max diameter; 140mm (5.5"); Working strokes: X x Z, 313mm (approximate 12.5") x 250mm (approximate 10"); 827mm X-axis total stroke; 90m/minute high speed; 60m/minute Z-axis fastest speed; 313mm X-axis motor torque, 250mm Z-axis motor torque.

Type: Lathe Mfr: Famar
VIEW ITEM ADD TO CART

High-Speed Used CNC Lathe – Famar Tandem 200 Model

High-Speed Used CNC Lathe – Famar Tandem 200 Model

Stock# 53417005

Used Famar Automatic CNC Lathe, Model Tandem 200. 150mm (5.9") max diameter; 140mm (5.5"); Working strokes: X x Z, 313mm (approximate 12.5") x 250mm (approximate 10"); 827mm X-axis total stroke; 90m/minute high speed; 60m/minute Z-axis fastest speed; 313mm X-axis motor torque, 250mm Z-axis motor torque.

Type: Lathe Mfr: Famar
VIEW ITEM ADD TO CART

Used LS Industries LSW-FW-SS Filter Washer – Stainless Steel, 18kW Heater, 3HP Pump, HMI Touchscreen, Precision Cleaning

Used LS Industries LSW-FW-SS Filter Washer – Stainless Steel, 18kW Heater, 3HP Pump, HMI Touchscreen, Precision Cleaning

Stock# 53973001

Used LS Industries Stainless Steel Filter/Parts Washer, Model LSW-FW-SS. Robust, high-performance unit designed for precision cleaning of individual air filters. Constructed entirely of stainless steel for durability and corrosion resistance, it features a 3HP pump and a 50-gallon tank equipped with an 18kW heating element capable of reaching working temperatures up to 175F. Rather than using a rotary table, the machine employs a custom fixture that moves parts forward and backward from the front to the back of the unit. The cleaning system includes two high-pressure, adjustable manifolds on the right side and two lower-pressure, adjustable manifolds on the left, allowing for optimal debris removal by countering the directional flow of air through filters. For drying, the unit utilizes two dry manifolds on each side, powered by a 9kW heater and a regenerative blower that deliver moderate yet effective drying performance. Additional features include an auto water fill system, an insulated tank and cabinet for thermal efficiency, and an intuitive HMI with PLC-based touch screen controls for easy programming and operation. This washer is purpose-built to clean one filter at a time, making it ideal for applications where precision and cleanliness are critical. 3/60/440V.

Type: Parts Washer Mfr: LS Industries
VIEW ITEM ADD TO CART

Used Baileigh PT-44-VH Plasma Cutting System – 4' x 4' Table, Auto Height Detection, Water-Cooled, 1" Steel Capacity

Used Baileigh PT-44-VH Plasma Cutting System – 4' x 4' Table, Auto Height Detection, Water-Cooled, 1" Steel Capacity

Stock# 47810002

Used Baileigh Plasma Cutting System Consisting Of: Baileigh PT-44-VH Plasma Table; 4' x 4' cutting area; Automatic Height Detection; Water Assist Cooling; Industrial Down Draft Table; High Quality Stepper Motors on X and Y Axis; Fully Welded Main Frame Will Support Up to 1??? Thick Mild Steel; Industrial Cable Track; Hardened, Ground and Polished Slide Ways; Control Console with Hand Held Pendant. 220 volt, 60 hertz; Built 2014.

Type: Plasma Cutter Mfr:
VIEW ITEM ADD TO CART

Used - PSI Machinery Press Brake, Model 600-50, 50 Ton Pneumatic, 6.5' Length

Used - PSI Machinery Press Brake, Model 600-50, 50 Ton Pneumatic, 6.5' Length

Stock# 51065019

Used PSI machinery Press Brake, Model 600-50. 50 Ton capacity. Approximately 6-1/2' long. Pneumatic. Serial # 33649.

Type: Press Brake Mfr:

Standard Terms and Conditions

VIEW ITEM $4,500.00

Used HTC Hydraulic Shear – 1/2" Mild Steel, 3/8" Stainless Capacity – Industrial Plate Cutting

Used HTC Hydraulic Shear – 1/2" Mild Steel, 3/8" Stainless Capacity – Industrial Plate Cutting

Stock# 53902001

Used HTC Shear. 1/2" mild steel cutting capacity; 3/8" stainless steel cutting capacity. 3/230-460V. Approx. OAD: 12.5 L x 8.33 W x 9.3 H.

Type: Shear Mfr: HTC
VIEW ITEM ADD TO CART

Used Custom Made Automated Sonic Welding Machine

Used  Custom Made Automated Sonic Welding Machine

Stock# 53834001

Used Custom Made Automated Sonic Welding Machine. OAD: 56" L x 73" W x 80" H. 1/60/240V. Built 2007/2008. Previously used to weld plastic cigarette filters.

Type: Sonic Welding Machine Mfr: Custom Made
VIEW ITEM ADD TO CART

Used Thermatool Tube Cutting Machine - 2”-4.5” OD, ABB Drives, Scrap Conveyors

Used Thermatool Tube Cutting Machine - 2”-4.5” OD, ABB Drives, Scrap Conveyors

Stock# 51610001

Used Thermatool Tube Cut-Off Machine. OD Range: 2"-4.5", Max Wall Diameter: .235". Max Speed 250 FPM, Hydraulic Accelerator Hydraulic Clutch, Encoder, Two Scrap Goose Neck Conveyors Unico Controller, ABB Drives, spare cut off die.

Type: Tube Cut Off Mfr:
VIEW ITEM ADD TO CART

Used Industrial Better Engineering Purifier Series Heavy Duty Parts Washer - Model F-3000-P-SS - 30" Diameter - 750 lbs Capacity

Used Industrial Better Engineering Purifier Series Heavy Duty Parts Washer - Model F-3000-P-SS - 30" Diameter - 750 lbs Capacity

Stock# 51878001

Used Better Engineering Turntable Washer, Model F-3000-P-SS, 304 Stainless Steel Contact Areas. 710 Square Inch turntable area. 30" Turntable diameter X 36" inside work height. Turntable load capacity 750 pounds. Front load style. Includes 95 Gallon tank capacity with 12 kW heater. Vertical 5hp pump, 75 GPM at 60 psi. Purifier filtration system. 12" Polypropylene oil skinner with auto timer. Stainless steel nozzles with 4" centers. Drying stage: 5hp centrifugal blower, including ASX-11 steam exhaust system. In-line Micron filter, rated 100 GPM. Serial # 21624, 3/60/460 Volt.

Type: Washer Mfr: Better Engineering
VIEW ITEM ADD TO CART

Used OMAX Maxiem 1530 Waterjet Cutter – 52" x 122" Table | 30 HP Pump | 50,000 PSI | CNC Control

Used OMAX Maxiem 1530 Waterjet Cutter – 52" x 122" Table | 30 HP Pump | 50,000 PSI | CNC Control

Stock# 52708001

Used OMax Maxiem Waterjet Cutting System; Model 1530; Cutting Area 52" X 10 Table Size 58" X 122" Z-Axis Travel 6" Intensifier Output 50,000 PSI Motor Size 30 HP; Equipped with OMax PC Based CNC Control; Omax M30 Direct Drive Pump; 500 Lb Abrasive Hopper; dual Side Drive Precision Rack & Pinion; Abrasive Hopper Settling Tank;

Type: Waterjet Mfr:
VIEW ITEM ADD TO CART

Used Pro Fusion Welding Lathe PFL-1216-37 – 36" Center to Center | TSS-2 Sharpshooter Included

Used Pro Fusion Welding Lathe PFL-1216-37 – 36" Center to Center | TSS-2 Sharpshooter Included

Stock# 52728002

Used Pro Fusion Custom Welding Lathe, Model PFL-1216-37. Made to be 36" center to center instead of the stock 16" with TSS-2 Sharpshooter tungsten sharpener set

Type: Welding Lathe Mfr: Pro Fusion
VIEW ITEM ADD TO CART
  • Unused Cosen SV-1100 Semi-Automatic Traveliong-Table Vertical Band Saw

    Unused- Cosen Semi-Automatic Traveliong-Table Vertical Band Saw. Model SV-1100, 43" x 43", New 2014, EQUIPPED WITH: Control Panel, Semi-Automatic Hydraulically Traversing Table, Hydraulic Blade Tension, Automatic Blade Breakage Detection, Roller Bearing Guides. CATALOG SPECIFICATIONS: Throat Depth 43" 1100 MM, Height Capacity, Maximum 43" 1100 MM, Table Dimensions, L x W 96.5" x 65", Table Dimensions, L x W 2450 MM x 1650 MM, Table Feed, Length 25.6" 650 MM, Table Load Capacity 17361 LBS 7875 KG, Workbed Height 58.3" 1482 MM, Blade Length 346" 8800 MM, Blade Width 1.6" 41 MM, Blade Thickness 0.05" 1.3 MM, Blade Speeds, Inf. Variable 1500 to 6000 FPM, Blade Speeds, Inf. Variable 450 to 1800 MPM, Blade Motor, Horsepower 20 HP 15 KW, Hydraulic Motor, Horsepower 1 HP .75 KW, Coolant Motor, Horsepower 1/4 HP .186 KW, Floor Space Required, L x W 146" x 124", Overall, Height 169", Weight Approximately 8800 LBS 4000 KGNEVER BEEN USED, S/n SV1030012.

    VIEW ITEM
  • Used Weldomat AG CH3-2437 Contact Welding Machine – Dual Units | 600 Contacts/Min | Tape & Wire Welding

    Used- Weldomat Automatic Contact Welding Machine with (2) Welding Units; Model AG CH3-2437;Suitable for welding solid and bimetal contacts off tape reel onto stip; Up to 600 contacts per minute; 300 contacts per welding unit; Horizontal tape fee; (2) welding units in machine; Tape width 1.20-3.50mm; tape height 0.30-1.00mm; cross section 0.05-2.60 square mm; round wire 1.00-2.20mm; range of contact length 0.60-3.50mm

    VIEW ITEM
  • Used Haas CNC Horizontal Machining Center – Model EC-300

    Used- Haas CNC Horizontal Machining Center, Model EC-300. 11.8" x 11.8" (300mm x 300mm) pallet size; 20" X-axis travel; 18" Y-axis travel; 14" Z-axis travel; 40 ATC tool magazine capacity; 8000 RPM spindle speed; CAT 40 spindle taper; Haas CNC controls; Full 4th axis pallet indexing; Chip conveyor; Through spindle coolant; Remote jog handle; Probe; Auxiliary coolant filter. Built 2012

    VIEW ITEM
  • Used Haas CNC Vertical Machining Center – Model VF-2SS

    Used- Haas CNC Vertical Machining Center, Model VF-2SS. 30" X-axis travel; 16" Y-axis travel; 20" Z-axis travel; 12,000 RPM spindle speed; CAT 40 spindle taper; 30HP spindle motor; 24 ATC tool magazine capacity; Haas CNC controls; Chip auger chip removal; 4th axis ready; Standard coolant system; Rigid tapping; Remote jog handle; Renishaw Wireless Intuitive Probing System (WIPS) spindle orientation. Built 2006.

    VIEW ITEM
  • Used CJRTec 100 Ton CNC Conveyor Beam Press – 63" x 50" Table | Die Mount System, Waste Recovery | 2015

    Used- CJRTec 100 Ton CNC Conveyor Beam Press/Die Press; Extended Table 63" x 50"; 2 Roll Pre-Feed Stand; Waste Recovery Cart; Die Mounting System. Mfg. 2015.

    VIEW ITEM
  • Used Mitsubishi 3718 LVP CO2 Laser – 4000W | 72" x 144" Cutting Table | Rotary Axis & Tube Cutting

    Used- Mitsubishi CO2 Laser, Model 3718 LVP, 4000 Watt. 72" wide x 144" long Cutting Exchange Tables Cutting Area. Rotary Axis for Tube cutting. Will cut .030" to 1" Mild Steel, .030" to 1/2" thick Stainless Steel. MSC Load/Unload System. Includes Accu Chiller, and Torrit exhaust system.

    VIEW ITEM
  • Used Herr-Voss Coil Line Arbor with Coil Car – 10,000 lb Capacity | 18–24" Coil ID | Control Box Included

    Used- Herr-Voss Coil Line Arbor and Coil Car; 18-24" coil ID capability; 10,000 pound capacity, arbor moves back and forward to adjust for camber; Includes control box for Coil Car and Paper winder.

    VIEW ITEM
  • Used Scotchman D08514-20M Ironworker – 85 Ton for Sale

    Used- Scotchman Iron Worker. Model D08514-20M. 85 Ton. Punching capacity for 1-1/16" thru 1" (27mm thru 24mm), throat depth 14" (355mm). Punch stroke 3.2" (81mm). Special Tooling up to 4" max diameter. Rect. notcher 2" x 4" x 1/2" (50mm x 100mm x 12mm). Angle shear 6" x 6" x 1/2" (150mm x 150mm x 12mm). Has drive 10hp 3/60/208v motor. 20" Long blade. 3200psi air requirements. Light material can do 45 strokes per minute, heavy material 18 strokes per minute. Capacity for Mild steel 65,000 psi tensile. Serial# 1095M1007. 3/60/208 Volt, 29.6 Amp.

    VIEW ITEM
  • Unused Timesavers Model 1211-01-5 Multi-directional Rotary Abrasive Disc Deburring Machine

    Unused- Timesavers Multi-directional, Dry Process Rotary Abrasive Disc Deburring Machine, Model 1211-01-5. 14" Diameter rotary disc, 8" maximum width stock, 4" infeed loading area, 0-3" machine opening, 10-30 FPM A/C feed speed, 39" constant pass-line height. Includes: rotary disc; adjustable disc; 5 hp main drive motor; infeed stop bar; infeed and outfeed hold-down rolls; centralized control panel; hour meter; variable speed conveyor drive. U.L. listed control components, 500 CFM exhaust requirement, no compressed air usage required, driven by a 5 hp, 3/60/230 volt motor. Built 2019.

    VIEW ITEM
  • Unused Timesavers Model 1211-01-5 Dry Process, Multi-Directional Rotary Abrasive Disc Deburring Machine

    Unused - Timesavers Dry Process, Multi-directional Rotary Abrasive Disc Deburring Machine, Model 1211-01-5. 14" diameter rotary disc, 8" maximum width stock, 4" infeed loading area, 0-3" machine opening, 10-30 FPM A/C feed speed, 39" constant pass-line height. Includes: rotary disc; adjustable disc; 5 hp main drive motor; infeed stop bar; infeed and outfeed hold-down rolls; centralized control panel; hour meter; variable speed conveyor drive. U.L. listed control components, 500 CFM exhaust requirement, no compressed air usage required, driven by a 5 hp, 3/60/230 volt motor. Built 2019.

    VIEW ITEM
  • Used Trumpf Trulaser 3040 CO2 Laser – 4000W | 4000mm x 2000mm | LoadMaster Automation | Built 2016

    Used- Trumpf CO2 Laser, Model Trulaser 3040 (L32). With Loadmaster automation. Rated at speeds of 100m/min; 4000mm x 2000mm laser working area; X= 4000 mm, Y= 2000 mm, Z = 115 mm; 4000 watt CO2 laser; Automatic longitudinal pallet change; Longitudinal conveyor; 17" color touch screen; Work space lighting; Position laser diode; Spray device; Pierce Line; Focus Line; Plasma Line; Cutting head; Lens line with condition check. Complete with dust collection and cooling unit. 3/60/480V. Built 2016.Unit is running under power. Can be seen in operation. Available immediately.

    VIEW ITEM
  • Mazak Super Turbo X48 Hi-Pro Laser Cutting Machine - 2000W (Used, 1994)

    Used- Mazak Super Turbo X48 Hi-Pro Laser Cutting Machines. 2000 Watt, Built in 1994 with 101,951 hours. Serial Number 110871.

    VIEW ITEM
  • Used High Performance Mazak Super Turbo X48 Hi-Pro Laser Cutting Machines.

    Used- Mazak Super Turbo X48 Hi-Pro Laser Cutting Machines..2500 Watt, Built in 1998 with 83,144 hours. Serial Number 140119.

    VIEW ITEM
  • Mazak Super Turbo X48 Hi-Pro Laser Cutting Machines.

    Used- Mazak Super Turbo X48 Hi-Pro Laser Cutting Machines..2500 Watt, Built in 1998 with 83,144 hours. Serial Number 140119.

    VIEW ITEM
  • Used Prima Platino 2040 5kW Laser Cutting Machine | 6'x12' Tables | Upgraded Optics & Controls

    Used- Prima Platino 2040 5kW Laser Cutting Machine with Laser Tube. 5,000 watt Laser capacity; 160" Y axis travel; 80" X axis travel; 6" z axis travel; 4,330 IPM rapid traverse; (2) Qty 6 x 12 (2m x 4m) table size; Primach 20L PC based CNC control. Equipped with: Laser tube up to 6 OD; Cantilever Flying Optic Laser Resonator; 5", 7.5" & 10" Focal Lens; Quick Pierce; Auto Focus; Programmable Assist Gas; Laser Piercing Monitor (LPM); Automatic Shut Off; Safe Impact Protection System; Chiller Unit; Duster Unit. New rack OI + LED screen in 2022 and new internal optics in 2023.

    VIEW ITEM
  • Used Famar Tandem 200 Automatic CNC Lathe – High-Speed Precision Turning

    Used- Famar Automatic CNC Lathe, Model Tandem 200. 150mm (5.9") max diameter; 140mm (5.5"); Working strokes: X x Z, 313mm (approximate 12.5") x 250mm (approximate 10"); 827mm X-axis total stroke; 90m/minute high speed; 60m/minute Z-axis fastest speed; 313mm X-axis motor torque, 250mm Z-axis motor torque.

    VIEW ITEM
  • Used Famar Automatic CNC Lathe – Tandem 200 for Sale

    Used- Famar Automatic CNC Lathe, Model Tandem 200. 150mm (5.9") max diameter; 140mm (5.5"); Working strokes: X x Z, 313mm (approximate 12.5") x 250mm (approximate 10"); 827mm X-axis total stroke; 90m/minute high speed; 60m/minute Z-axis fastest speed; 313mm X-axis motor torque, 250mm Z-axis motor torque.

    VIEW ITEM
  • High-Performance Famar Tandem 200 CNC Lathe

    Used- Famar Automatic CNC Lathe, Model Tandem 200. 150mm (5.9") max diameter; 140mm (5.5"); Working strokes: X x Z, 313mm (approximate 12.5") x 250mm (approximate 10"); 827mm X-axis total stroke; 90m/minute high speed; 60m/minute Z-axis fastest speed; 313mm X-axis motor torque, 250mm Z-axis motor torque.

    VIEW ITEM
  • Precision Used CNC Lathe – Famar Tandem 200

    Used- Famar Automatic CNC Lathe, Model Tandem 200. 150mm (5.9") max diameter; 140mm (5.5"); Working strokes: X x Z, 313mm (approximate 12.5") x 250mm (approximate 10"); 827mm X-axis total stroke; 90m/minute high speed; 60m/minute Z-axis fastest speed; 313mm X-axis motor torque, 250mm Z-axis motor torque.

    VIEW ITEM
  • High-Speed Used CNC Lathe – Famar Tandem 200 Model

    Used- Famar Automatic CNC Lathe, Model Tandem 200. 150mm (5.9") max diameter; 140mm (5.5"); Working strokes: X x Z, 313mm (approximate 12.5") x 250mm (approximate 10"); 827mm X-axis total stroke; 90m/minute high speed; 60m/minute Z-axis fastest speed; 313mm X-axis motor torque, 250mm Z-axis motor torque.

    VIEW ITEM
  • Used LS Industries LSW-FW-SS Filter Washer – Stainless Steel, 18kW Heater, 3HP Pump, HMI Touchscreen, Precision Cleaning

    Used- LS Industries Stainless Steel Filter/Parts Washer, Model LSW-FW-SS. Robust, high-performance unit designed for precision cleaning of individual air filters. Constructed entirely of stainless steel for durability and corrosion resistance, it features a 3HP pump and a 50-gallon tank equipped with an 18kW heating element capable of reaching working temperatures up to 175F. Rather than using a rotary table, the machine employs a custom fixture that moves parts forward and backward from the front to the back of the unit. The cleaning system includes two high-pressure, adjustable manifolds on the right side and two lower-pressure, adjustable manifolds on the left, allowing for optimal debris removal by countering the directional flow of air through filters. For drying, the unit utilizes two dry manifolds on each side, powered by a 9kW heater and a regenerative blower that deliver moderate yet effective drying performance. Additional features include an auto water fill system, an insulated tank and cabinet for thermal efficiency, and an intuitive HMI with PLC-based touch screen controls for easy programming and operation. This washer is purpose-built to clean one filter at a time, making it ideal for applications where precision and cleanliness are critical. 3/60/440V.

    VIEW ITEM
  • Used Baileigh PT-44-VH Plasma Cutting System – 4' x 4' Table, Auto Height Detection, Water-Cooled, 1" Steel Capacity

    Used- Baileigh Plasma Cutting System Consisting Of: Baileigh PT-44-VH Plasma Table; 4' x 4' cutting area; Automatic Height Detection; Water Assist Cooling; Industrial Down Draft Table; High Quality Stepper Motors on X and Y Axis; Fully Welded Main Frame Will Support Up to 1??? Thick Mild Steel; Industrial Cable Track; Hardened, Ground and Polished Slide Ways; Control Console with Hand Held Pendant. 220 volt, 60 hertz; Built 2014.

    VIEW ITEM
  • Used - PSI Machinery Press Brake, Model 600-50, 50 Ton Pneumatic, 6.5' Length

    Used- PSI machinery Press Brake, Model 600-50. 50 Ton capacity. Approximately 6-1/2' long. Pneumatic. Serial # 33649.

    VIEW ITEM
  • Used HTC Hydraulic Shear – 1/2" Mild Steel, 3/8" Stainless Capacity – Industrial Plate Cutting

    Used- HTC Shear. 1/2" mild steel cutting capacity; 3/8" stainless steel cutting capacity. 3/230-460V. Approx. OAD: 12.5 L x 8.33 W x 9.3 H.

    VIEW ITEM
  • Used Custom Made Automated Sonic Welding Machine

    Used- Custom Made Automated Sonic Welding Machine. OAD: 56" L x 73" W x 80" H. 1/60/240V. Built 2007/2008. Previously used to weld plastic cigarette filters.

    VIEW ITEM
  • Used Thermatool Tube Cutting Machine - 2”-4.5” OD, ABB Drives, Scrap Conveyors

    Used- Thermatool Tube Cut-Off Machine. OD Range: 2"-4.5", Max Wall Diameter: .235". Max Speed 250 FPM, Hydraulic Accelerator Hydraulic Clutch, Encoder, Two Scrap Goose Neck Conveyors Unico Controller, ABB Drives, spare cut off die.

    VIEW ITEM
  • Used Industrial Better Engineering Purifier Series Heavy Duty Parts Washer - Model F-3000-P-SS - 30" Diameter - 750 lbs Capacity

    Used- Better Engineering Turntable Washer, Model F-3000-P-SS, 304 Stainless Steel Contact Areas. 710 Square Inch turntable area. 30" Turntable diameter X 36" inside work height. Turntable load capacity 750 pounds. Front load style. Includes 95 Gallon tank capacity with 12 kW heater. Vertical 5hp pump, 75 GPM at 60 psi. Purifier filtration system. 12" Polypropylene oil skinner with auto timer. Stainless steel nozzles with 4" centers. Drying stage: 5hp centrifugal blower, including ASX-11 steam exhaust system. In-line Micron filter, rated 100 GPM. Serial # 21624, 3/60/460 Volt.

    VIEW ITEM
  • Used OMAX Maxiem 1530 Waterjet Cutter – 52" x 122" Table | 30 HP Pump | 50,000 PSI | CNC Control

    Used- OMax Maxiem Waterjet Cutting System; Model 1530; Cutting Area 52" X 10 Table Size 58" X 122" Z-Axis Travel 6" Intensifier Output 50,000 PSI Motor Size 30 HP; Equipped with OMax PC Based CNC Control; Omax M30 Direct Drive Pump; 500 Lb Abrasive Hopper; dual Side Drive Precision Rack & Pinion; Abrasive Hopper Settling Tank;

    VIEW ITEM
  • Used Pro Fusion Welding Lathe PFL-1216-37 – 36" Center to Center | TSS-2 Sharpshooter Included

    Used- Pro Fusion Custom Welding Lathe, Model PFL-1216-37. Made to be 36" center to center instead of the stock 16" with TSS-2 Sharpshooter tungsten sharpener set

    VIEW ITEM
Cash Icon
Surplus Equipment?

We pay "Top Dollar" for your idle process equipment! Fill out our form and our buying team will get back to you.

SELL YOUR EQUIPMENT
Search Icon
Browse Inventory

View our entire process equipment inventory online or visit our location for an equipment inspection.

View Inventory
Phone Icon
Contact Us

Contact Us

630-350-2200