Used Gea-Niro Dryers - Drying Equipment

Stock# 40425018

Used GEA Niro Sanitary Stainless Steel Spray Drying System. Consisting of: Model PSD4 GEA Niro spray dryer, approximately 8' inner diameter x 8'6" straight side x 8'9" deep cone bottom spray dryer chamber, 316 stainless steel product contact surfaces, mirror internal finish, with fluid nozzle and centrifugal rotary atomizers, approximately 17" diameter, sanitary stainless steel cyclone fines collector, approximately 6' diameter dust collector, sanitary stainless steel construction, pulse jet, cone bottom, set up for electric or steam heating with Watlow, 145 kw electric heater with external Hepa filter, air handler with steam coil and Watlow 37.25 kw electric heater, internal Hepa filter, designed for nitrogen purge, 7.5 hp process air supply blower, 7.5 hp process air return blower, set up for solvent recovery with condensor(less receiver pot), solution feed pump with Micro Motion flow meter, inter connecting pipe work from dryer, to dust collector and cyclone, GEA Niro control panel and HMI panel, 460 volt, 3 phase, GEA Niro fabrication# 099-0013-00, built 1999.

Stock# 51188001

Used GEA Niro Spray Dryer Atomizer, Stainless steel. Overall size is 1.2 meter x 1.2 meter x approximately 2 meter high. Does not include the spray nozzle.

Stock# 53375001

Used GEA Niro Spray Dryer, Model FSD-4. Min/Max Pressure: -30/100 mbar. Chamber: Diameter 1200 x 750 mm / cone: 40 degrees, inside sheeting of AISI 316, cladding of AISI 304. Nominal main process gas flow 400 kg/h. Water evaporation capacity 5 -20 kg/h. Typical mean particle size 50-300 (UM). Exhaust system: Cyclone Diameter 394 type CHE and scrubber type SHE 280. Heating: El-heater, 40 kW for max. inlet temp. 300C. Atomizing equipment: Two-fluid nozzle, co-current. Powder collection: Single point by means of a bucket on a fluid bed. Pump: Peristaltic pump, infinitely variable remote control. Control panels: Electrical panel, floor mounted. Cabling to power consumers excluded. The pneumatic panel, floor mounted, and hoses are excluded. Motors and field instruments: Included. Fans: Exhaust fan and supply fan with speed regulation by frequency converter. Both are mounted in a noise-attenuating box. Supply fans for fluid bed with speed regulation by frequency converter. Material: Steel parts coming into contact with the product are made of stainless steel AISI 316 / EN 1.4401. Equipment available: Process gas flow measurement. Process gas dehumidifying unit. Explosion suppression system for chamber.

Stock# 53493005

Used GEA Niro Swirl Fluidizer/Agitated Flash Dryer System. System comprised of: Controls; Inlet air gas heater; stainless steel fluidizing slurry tank, approx. 3 D x 3 H with bottom scraped-wall blade agitator and outlet to screw conveyor. Mounted on a 86" x 87" x 82" stainless steel skid; Air flow 450-630 kg/hr air flow; 100-350 degrees C inlet temp; 60-150 degrees C outlet temp.; 0-55 kg/hr water evaporation rate; 100 kg/hr max. powder rate; 150 kg/hr max. feed rate; Natural gas/propane fuel supply. Built 2009. Used for drying cellulose pastes prior to filtration.

Stock# 53943001

Used NIRO (GEA) Portable Stainless Steel Spray Dryer, Model Mobile Minor, SN 3266. With separate unitized portable skid which includes a control panel with Seimens HMI and Nitrogen Pump, Peristaltic Pump, Drager volatile compound sensor and Halifax fan. The equipment includes (3) Spray nozzles, second Watson Marlow Pump, San Electric 9,000 Watt heating element, intrinsically safe panel, 3X Plastic totes of misc. parts and spares. According to the catalog, key process data includes Nominal main process gas flow (kg/h) 100, Water evaporation capacity (kg/h) 0.5-6, typical mean particles size (micrometer) 5-80, space requirements (m), 2.5 L X 2 W X 2.3. S/n 3266. Year. 2006