Waste Water Equipment

Used Rubicon 8500 Sq. Ft. 304L Tube Heat Exchanger – 51" x 26', Carbon Steel Shell

Used Rubicon 8500 Sq. Ft. 304L Tube Heat Exchanger 51" x 26', Carbon Steel Shell, rated 110/FV @ -20 to 650 F. (1294) 304L tubes rated 110/FV @-20 to 550 F. Has 304L tubesheets and carbon steel heads. Fittings: (2) 16" inlet/outlet, (2) 3/4" vent/drain, (1) 18" inlet, (1) 14" outlet, (4) 3/4" vent/drain, (2) 2" acid wash, and (1) 6" flush out. NB# 1959, S/N 3387-1A. Built 2007.

Used Southern Heat Exchanger Corp. 304L Stainless Steel Horizontal Heat Exchanger, Approximately 8500 sq. ft

Used- Southern Heat Exchanger Corp. 304L Stainless Steel Horizontal Heat Exchanger, Approximately 8500 sq. ft. 51" diameter X 26' face to face length. 304L Shell rated 110/FV @ -20 to 650 F. (1294) 304L tubes rated 110/FV @-20 to 550 F. Has 304L tubesheets and carbon steel heads. Fittings: (2) 16" inlet/outlet, (2) 1" Aux., (2) 1" vent/drain, (2) 18" inlet/outlet, (1) 2" Aux., (1) 1" vent, (1) 6" drain, (1) 2" Aux. NB# 15500. Built 2019.

Rubicon 8500 Sq. Ft. Shell & Tube Heat Exchanger – Carbon Steel Shell, 304L Tubes

Rubicon 8500 Sq. Ft. Shell & Tube Heat Exchanger Carbon Steel Shell, 304L Tubes. 51" diameter X 26' face to face length. Carbon Steel Shell rated 110/FV @ -20 to 650 F. (1294) 304L tubes rated 110/FV @-20 to 550 F. Has 304L tubesheets and carbon steel heads. Fittings: (2) 16" inlet/outlet, (2) 3/4" vent/drain, (1) 18" inlet, (1) 14" outlet, (4) 3/4" vent/drain, (2) 2" acid wash, and (1) 6" flush out. NB# 1959, S/N 3387-1A. Built 2007.

Used Rubicon 304L Tube Heat Exchanger – 51" Diameter, 26' Length, Built 2007

Used Rubicon 304L Tube Heat Exchanger 51" Diameter, 26' Length, Built 2007. Approximately 8500 sq. ft. Carbon Steel Shell rated 110/FV @ -20 to 650 F. (1294) 304L tubes rated 110/FV @-20 to 550 F. Has 304L tubesheets and carbon steel heads. Fittings: (2) 16" inlet/outlet, (2) 3/4" vent/drain, (1) 18" inlet, (1) 14" outlet, (4) 3/4" vent/drain, (2) 2" acid wash, and (1) 6" flush out. NB# 1959, S/N 3387-1A.

Rubicon Horizontal Heat Exchanger – 8500 Sq. Ft., Stainless Tubes, Heavy-Duty Use

Rubicon Horizontal Heat Exchanger 8500 Sq. Ft., Stainless Tubes, Heavy-Duty Use. 51" diameter X 26' face to face length. Carbon Steel Shell rated 110/FV @ -20 to 650 F. (1294) 304L tubes rated 110/FV @-20 to 550 F. Has 304L tubesheets and carbon steel heads. Fittings: (2) 16" inlet/outlet, (2) 3/4" vent/drain, (1) 18" inlet, (1) 14" outlet, (4) 3/4" vent/drain, (2) 2" acid wash, and (1) 6" flush out. NB# 1959, S/N 3387-1A. Built 2007.

Large Capacity 10,000 Gallon 304L Stainless Steel Process Tank

Used 304L Stainless Steel Tank, Approximately 8,500 gallon. Tank measures approximately 110" diameter x 197" straight sidewall with a 15" cone bottom and is supported by (4) 48" legs. Features a cone bottom with center outlet, (6) 2" top fittings, and (1) 2" bottom outlet for process connections. The tank previously held a non-toxic latex solution and has been cleaned out. The tank was originally insulated, but the insulation has been removed, leaving the stainless steel exterior exposed.

Used 8,600 Gallon Stainless Steel Storage Tank – Food & Beverage Grade

Used- Approximate 8,600 Gallon 304 Stainless Steel Insulated Bulk Storage Tank, Vertical. Vessel measures 94" diameter X 288" straight side, sloped bottom leading to 3" diameter side bottom outlet. Also includes side bottom manway with cover. Vessel is fully insulated with foam and outer shroud. Previously used at juice facility. 304 SS

Used Tranter Superchanger 878.8 Sq. Ft. Heat Exchanger – 150 PSI, Expandable Frame

Used- Tranter Superchanger Approximate 878.8 Square Feet Surface Area Plate Heat Exchanger, Model 06-T16-UP-146. Approximate (146) 29" wide x 68" tall 316 stainless steel plates rated 150 psi at 20 to 200 degrees F. (2) 6" Diameter, (2) 8" diameter inlet & outlets. Mounted on an expandable carbon steel frame. Serial #SC-22880. Shop order # 83735. Built 1999. No National Board #. Unit is U stamped.

MFR: Tranter

Used Industrial Tranter Plate Heat Exchanger – 878.8 Sq. Ft., 150 PSI, Stainless Steel

Used- Tranter Superchanger Model 06-T16-UP-146 Plate Heat Exchanger, Approximate 878.8 Square Feet Surface Area. Approximate (146) 29" wide x 68" tall 316 stainless steel plates rated 150 psi at 20 to 200 degrees F. (2) 6" Diameter, (2) 8" diameter inlet & outlets. Mounted on an expandable carbon steel frame. Serial # SC-16071. Shop order # 71975. Built 1996. No National Board #, unit is U stamped.

MFR: Tranter

Used Tranter Superchanger Plate Heat Exchanger – 878.8 Sq. Ft., 316 Stainless Steel, 150 PSI

Used- Tranter Superchanger Plate Heat Exchanger, Approximate 878.8 Square Feet Surface Area, Model 06-T16-UP-146. Approximate (146) 29" wide x 68" tall 316 stainless steel plates rated 150 psi at 20 to 200 degrees F. (2) 6" Diameter, (2) 8" diameter inlet & outlets. Mounted on an expandable carbon steel frame. Missing manufacturers tag.

MFR: Tranter

Used Kent 9" x 24" Three Roll Mill – Industrial TRM for Fine Grinding & Dispersion

Used- Kent 9" 24" three roll mill with manual roll/apron and temperature control, 10 hp silent chain drive. (TRM). with manual roll set, manual apron set, and manual roll temperature control. Probably driven through a silent chain drive by a 10 HP motor. Does not have an electrical package.

Industrial Twin Screw Extruder – Krauss Maffei Model KMD90, Electrically Heated, Oil Cooled Barrel

Used- 90mm Krauss Maffei Model KMD90 Counter-Rotating Twin Screw Extruder, 20:1 L/D. Has electrically heated oil cooled barrel. Driven by 40HP DC motor with SCR control. Includes temperature control panel.

MFR: Krauss Maffei