Waste Water Equipment

Buy Used Cherry Burrell Tank – Industrial Storage & Processing

Used- Cherry Burrell Tank, Stainless Steel, Vertical. Flat open top. Provision for side entering clamp on agitator, no agitator. Bottom outlet. Mounted on (4) legs. Serial# E-227-92.

MFR: Cherry Burrell

Used Alfa Laval Membrane System with Ultrafiltration (UF) – 130 m³/h Permeate Flow

Used-Alfa Laval Membrane System with Ultrafiltration UF, Permeate flow rate 130 m3/h (570 gpm) per Vessel, Design average flux of 30 l/m2h, Spiral feed spacer of 30 mil. (2) Vessels each pair with a common feed line and the ability to share on CIP System.

MFR: Alfa Laval

US Centrifuge; Model A262. Used.

Used- US Centrifuge, Model A262; Capable of running up to 40 gallons/minute; Bowl volume 4 Gallons; Maximum Bowl speed 2500 RPM; Bowl diameter 18"; Max "G" Force @ OD 1600 x one gravity; Maximum Operating temperature 160 degrees F; Maximum Particle size 1/4"; Feed Pressure 5 PSI @ 40 gpm; Stainless Steel bowl; unit housed in a 8'x10' container; 50" Long x 34.25" Wide x 50" High (without stand, approximately 90" with stand); Approximately 3,000 lbs (5,000 with container); Last used for manure separation pilot project.

MFR: US Centrifuge

OG-375 oxygen concentrator

Used- OG-375 oxygen concentrator Industrial design uses steel zeolite towers and rebuildable solenoid valves for a easy to maintain system that will never wear out or become obsolete. Features Produces 375 SCFH oxygen at up to 45 PSI Industrial heavy-duty design and quality oxygen concentrator Energy efficient oxygen concentrators require less compressed air for operation High oxygen outlet pressure 45 PSI standard, up to 65 PSI outlet pressure available Completely rebuild-able and easy to maintain design will offer many years of operation More Information Weight 1.35 lbs (0.61 kg) Dimensions 30" x 36" x 84" (76.2 x 91.4 x 213.4 cm) LxWxH Warranty 1 Year Max Pressure 45 PSI (3.16 Bar) Higher pressure systems available Oxygen Connection 3/8-inch NPT Inlet/Outlet Connections 3/8-inch NPT Integrated Compressor No 68 CFM @ 90 PSI required Oxygen Flow Rate 176.98 LPM (375 SCFH) The OG-375 will require an air tank and an oxygen tank for proper operation.

Lot of (2) Used USA Lab 100LB Jacketed Tanks – 304 Stainless Steel, 60L Capacity

Lot of (2) Used- USA Lab 100LB Jacketed Tank, 304 Stainless Steel, Vertical. Approximate capacity 60 Liter. Approximate jacket capacity 18 liter. Mounted on (4) legs with casters.

Shenzhou Desludger Disc Centrifuge, Model DHC730

Unused- Shenzhou Desludger Disc Centrifuge, Model DHC730. Stainless steel construction (product contact areas); Maximum bowl speed 4500 rpm; separator design; 7712 separation factor; 25~35 m3/h capacity (according to different materials); 55 kW (73.75hp) drive motor; control cabinet; PLC. Currently disassembled.

Flottweg Separation Technology Z23-4/441 Solid Bowl Tricanter Centrifuge

Used- Flottweg Separation Technology Z23-4/441 Solid Bowl Tricanter Centrifuge. 316 Stainless steel construction (product contact areas). Maximum bowl speed 5500 rpm, three phase separation (liquid/liquid/solids separation), conveyor. 360-degree discharge with wear liners, base, casing, feed pipe, 11 KW-13KW, 3/50-60/400-volt motor, Back drive system, grease lubrication pump, Frame mounted. Flottweg control panel. Previously used in an alcohol fermentation plant. Serial# 002.189.14. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Flottweg

Used Flottweg Z4D-3/409 Sedicanter® Decanter Centrifuge | 316 Stainless Steel | 7,750 RPM | 30 kW Main Drive

Used- Flottweg Model Z4D-3/409 Sedicanter Decanter Centrifuge. 316 stainless steel. Max bowl speed 7750 RPM, 30 KW (40.2hp) Main drive motor, 7.5 KW (10hp) back drive motor, gearbox, feed tube, lube system, vibration switch/isolators, guards, chutes and control panel. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Flottweg

Used Tate Metalworks 2205 Duplex Stainless Steel Vertical Sand Filter – 4,000 Gallon, 100 PSI

Used- Tate Metalworks 2205 Duplex Stainless Steel Vertical Sand Filter, Approx. 4,000 gallon. 8 diameter X 11 straight side; Internal rated 100/-15PSI @ 20 to 175 degrees F.; Dished top and bottom. Has 4" wide middle stiffener ring; Top Fittings: 24" middle top cover with 8" flanged opening to internal pipe with diffuser openings; (2) 4" inlets. 8" center bottom discharge and 6" offset bottom outlet with blind. Unit has all stainless steel face piping. NB# 432, Serial# 02010-01. Built 2002. Equipped with bottom diffuser.

Used Flebu 12.5 m³/s (26,460 CFM) Stainless Steel Blower – 300 HP, TRH 2.28/71-3, Built 2012

Used- Flebu 12.5 m3/s (26,460 CFM) stainless steel blower. 28" intake, 28" X 22" discharge. Has 14" X 18" cleanout. Rated pressure 6.1 kPa @ 1400 RPM. Fan Type TRH 2.28/71-3. Flebu Ref# 120204.1. Powered by 300 HP 3/60/2300-4160 volt motor. Shipping dims: 13' long X 7' wide X 8'-3" tall. Built 2012.

Alfa Laval UVNX-945B-11G Solid Bowl Tricanter Centrifuge. used.

Used- Alfa Laval UVNX-945B-11G Solid Bowl Tricanter Centrifuge. 316 Stainless steel construction (product contact areas). Maximum bowl speed 2900 rpm. Single row of lined cake discharge ports, single lead conveyor, base, casing, gearbox, feed pipe.45 kw, 400-690/3/50-60 main drive motor & gearbox. Back drive system. Mounted on a stand with 4 legs. Control panel. Previous used in an olive oil application .Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

Unused Stainless Steel S-1 Arc Filter Screen for Wet End Equipment – 1.3 m² Filtration

Unused- Stainless Steel S-1 Arc Filter Screen for Wet End Equipment. Filtration area 1.3 m2. Cleaning water volume 1.7 L/S. 316L SS Screen 704mm wide x 1820mm long x 0.05mm. 304 SS Pulp Feed Inlet Head, 316L SS Screen Plate, 304 SS Shell and Washing Device, Seam Width 50um. 6" Inlet, 6" fines outlet, 10" overs outlet. (2) Clamp-on cover (front and back). Control with Siemens Logo! 12/24 RC PLC. Mounted on (4) legs. Serial# 2022-01-1-0301. Built 2022. MFG - Shandong Tianli Machinery.