Power Generation Equipment
Stock No.:
44430016Used Generac 1MW Open Skid Generator | 1130 kW Mitsubishi Diesel Standby Power Unit
Used- Generac 1MW Open Skid Generator, Model 575RSL4044. Rated for stand-by duty. Rated at 1130 kW, 277/480 volts (re-connectable), 1699 amps. 1600 amp breaker (adjustable). Driven by a 1449hp Mitsubishi S12H-PTA engine, Serial# 30119. 312.5 original hours. Serial# WA522385-1299, Built 1999.
MFR: Generac
Stock No.:
11059402Used DCI 11,500-Gallon 304 Stainless Steel Jacketed Tank – 150 PSI Sanitary Food Process Vessel
Used DCI 11,500-Gallon 304 Stainless Steel Jacketed Tank 150 PSI Sanitary Food Process Vessel. Approximately 11' diameter x 16' height, 22'6'' overall height. Jacket rated 150 psi from -20 degrees F to 350 degrees F. Dish top and bottom with a 6'' center bottom outlet. Serial #JS8081, built 2021. Previously used in sanitary food applications.
MFR: DCI
Stock No.:
10128101Used 4,500 Liter Stainless Steel Beer Barrel Tank | Jacketed Brewery Process Vessel
Used- 1188.77 gal (4500 L) Beer Barrel tank, built by ABC- Kinglai Co, Ltd for Glacier Tanks LLC. Built 05/2016. This stainless steel tank is about 59" in diameter with a 81" straight side and 12" dished heads. Volume 4.5 m3. Design pressure shell 0.1 MPa, jacket 0.15 Mpa. Design temperature 98 degrees C. jacket on the side of tank only. Dished heads. Two top lift lugs. Tank has four legs. Top has one 3" tri clamp nozzle and one 1.25" tri clamp nozzle. Bottom nozzles one 1.25" tri clamp and one 1.5" tri clamp. Side nozzles one 16" x 13" elliptical hinged lid manway, five 1.25" tri clamp nozzles for jackets, two 1.25" tri clamp, two .75" tri clamp nozzles, and one .75" coupling. Serial# AKL16-A-10005. Overall dimensions70" x 70" x 122" tall.
MFR: ABC
Stock No.:
54472002Used Sonoma Stainless 11,960 Gallon Wine Tank | Glycol Jacketed & Insulated Stainless Vessel
Used- Sonoma Stainless Wine Tank, 11,960 gallon. Stainless steel. Glycol jacketed. Exterior foam insulated. 236" overall height x 127" diameter. 34" high legs/tank stand. Previously used for wine storage.
Stock No.:
54296016Used Feldmeier 1,200 Gallon Stainless Steel Tank – Vertical Cone Bottom Vessel w
Used- Feldmeier Stainless Steel Tank, Approximate 1,200 Gallon Capacity, Vertical. Approximately 58" diameter x 96" straight side. Dished top, coned bottom. Openings top: 18" manway with cover, 4", 3", (3) 2", Side: (2) 2". Bottom: 3", 1", 4" Center bottom outlet with approximately 25" discharge height. Mounted on (4) stainless steel legs. Serial# E-572-04.
MFR: Feldmeier
Stock No.:
11059407Used Alloy Fab 12,000-Gallon 304 Stainless Steel Mix Tank – 7.5 HP Agitator & Internal Heating Coils
Used Alloy Fab 12,000-Gallon 304 Stainless Steel Mix Tank 7.5 HP Agitator & Internal Heating Coils. Approximately 12' diameter x 15'8'' height, 216'' overall height. 304 Stainless steel. Flat top and bottom. Includes 7.5 HP top entering agitator. Tank has (2) loops of 2'' internal heating coils. Top ports include (1) 8'' 150lb flange, (3) 1.5'' threaded, (2) 3'' threaded, (1) 3'' vent pipe. Side ports include 19'' manway, (1) 2'' threaded, (2) 3'' threaded, (1) 1'' threaded, (2) 1/2'' threaded, and (2) 150lb flange inlet/outlets.
MFR: Alloy Fab
Stock No.:
40425063Used DCI 12,000 Gallon 304 Stainless Steel Storage Tank | Jacketed | Cone Bottom | Skirt Mounted | Built 1997
Used DCI 12,000 Gallon 304 Stainless Steel Storage Tank | Jacketed | Cone Bottom | Skirt Mounted | Built 1997. Approx. 132" inner diameter x 185" straight side, dish top, 41" deep cone bottom, (3) 28" high side jackets, (1) bottom jacket rated 150 psi at 100 f, 16" x 20" side manway, skirt mounted, approximately 333" OAH, SN 97D-56284. Built 1997.
MFR: DCI
Stock No.:
50800035Used A&B Process 12,000 Gallon Jacketed Vertical Mix Tank – 304L Stainless Steel (2019)
Used- A&B Process 12,000 Gallon Jacketed Vertical Mix Tank. Vessel rated 45 psi/FV @200 deg f. Jacket rated 100 PSI @ 200 deg F. Bottom scrape with turbine agitator. 304L stainless steel. Has spray balls. 2" fittings. 3 HP mixer. Built 2019.
MFR: A & B
Stock No.:
14195008Used Gemini 125 HPSS CNG Gas Compressor – 4 Stage, 300 CFM, 125 HP, Complete System with Cascade, Dryer, Dispensers
Used- Gemini Gas Compressor, Model 125 HPSS, 4 Stage 300 CFM. CNG (Compressed Natural Gas) compressor system includes a four-stage, water-cooled, reciprocating compressor designed for efficient gas compression up to high pressures. U.S. Motors 125 HP, 1760 RPM, 460 Volt motor (S/N X783119) and includes an MK-AJ 24" recapture tank (S/N 9605). It is equipped with an EI C36-0527 cooler (S/N 93483) and a three-cylinder ASME cascade system, each cylinder measuring 20" x 11'6", rated for 5,000 psig and 5,711 cu. ft., with serial numbers 43338, 43339, and 43340. The unit utilizes a Marcum 11 Valve Electro-Pneumatic PMV/SMV priority/sequence panel for flow control. Compression is handled by a Quincy F340-80 air compressor rated at 7.5 HP, 460 Volt, with a discharge aftercooler (S/N 6019514). Drying is managed by a Wilkerson DE3 Twin Tower Heatless Dryer housed in a NEMA 4 enclosure (S/N 4339311). Fuel dispensing is facilitated by two DVCO 2020D dispensers with Hansen nozzles, serial numbers 930034 and 930037.and includes an air-cooled aftercooler, inter-stage separators, and safety relief valves on all stages. The compressor is skid-mounted with an integrated control panel for monitoring and automation, and it is designed for continuous-duty operation. Suitable for vehicle fueling stations or industrial applications, the unit ensures reliable performance with built-in protection systems.
MFR: Gemini
Stock No.:
52718001Used Atlas Copco Air Compressor & Dryer System – ZE4-B & FD 1250 VSD
Used 2013 Atlas Copco oil-free rotary screw compressor and VSD dryer package with approximately 5,000 total operating hours, complete with filtration and modern controls. Consists of an Atlas Copco Model ZE4-B Low Pressure Oil-Free Rotary Screw Compressor rated at ~876 CFM, driven by a 125hp 3/60/440-460v 3560rpm air-cooled motor, 33 psig max working pressure, with Elektronikon GraphicPlus HMI and Siemens Sinamics drive (S/N APF185963); an Atlas Copco FD 1250 VSD Refrigerated Air Dryer rated at 2,646.25 CFM, 11.8kW, R404a refrigerant with Elektronikon HMI controls (S/N APF185022); and (2) Atlas Copco DD 1400FF inline air filters with housings (S/N APF185422/423). Oil-free screw technology with refrigerated drying and inline filtration makes this package well-suited to clean-air applications in pharma, food and beverage, electronics, and any process where oil carryover is unacceptable. Turnkey, ready-to-integrate compressed-air solution rather than a bare machine. System reported in excellent working condition; documentation available, photos and inspection recommended.
MFR: Atlas Copco
