Power Generation Equipment
Stock No.:
41174079Used Alfa Laval NX 438B-31G Solid Bowl Decanter Centrifuge – 316 SS High-Speed Separation System
Used- Alfa Laval NX 438B-31G Solid Bowl Decanter Centrifuge. 316 Stainless Steel construction (product contact areas). Maximum bowl speed 3650 RPM. 360 deg single row of lined cake discharge ports with wear liners, liquid plate dams, base, stainless steel casing, gearbox, 55 kW (82.5 HP), 3/50/400-Volt main drive motor. 3.5 KN gearbox. Hydraulic back drive. Frame mounted on (4) legs. Control panel. Previously used in a fishmeal/oil application. Our Freight specialists can assist with any customs documentation to insure a smooth transition.
MFR: Alfa Laval
Stock No.:
45053443Used Nu-Con Model NCVR-18-8-3T Stainless Steel Tank
Used-Nu-Con Model NCVR-18-8-3T Stainless Steel Tank. Unit is mounted on casters, serial number: N08060-GA-106. 304 stainless Steel, interior ground to a #4 150 grit finish. No cover. Has a 24" discharge height from floor to the bottom of the flange.
Stock No.:
45053457Used Murzan Model PI-50 Stainless Steel Diaphragm Pump
Used- Murzan Model PI-50 Stainless Steel Diaphragm Pump. Serial# 98063558.
MFR: Murzan Inc
Stock No.:
45141014Pre-Owned Vacuum Thermal Instant Sterilizer (VTIS) – 65 GPM, Steam Injector System
Used- Direct Steam Injection Sterilization System, 65 GPM. Vacuum Thermal Instant Sterilization (VTIS) is designed to sterilize fermentation media at temperatures up to 290F for 20 second hold time. Product is pre-heated to 175F before going into the Hydrothermal Steam Injector. The Steam injector puts steam in direct contact with the product and then it goes into the flash chamber, which removes the extra water added from the condensed steam. Then the sterilized product is cooled to the final temperature in the Regeneration Heat Exchanger section. Upon exiting the regen section, the product goes from the VTIS Skid to the fermenter.
Stock No.:
48744024Used Pieralisi Maior 3 Decanter Centrifuge
Pieralisi Maior 3 Decanter Centrifuge. Stainless Steel construction (product contact areas). Maximum bowl speed 4000 rpm, single row cake discharge ports, conveyor, casing, gearbox, Approx 22 HP 380/3/50 drive motor. On 4 legs. Reported rebuild. Previous used in an olive oil application. Used. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Pieralisi
Stock No.:
49317050Used Cummins 750 kW Diesel Generator – DQFAA, Tier 2, 480V Capable, UL2085 Tank, Passed Load Test
Used-750 kW standby (680 kW prime) Cummins diesel generator set, model DQFAA, SN-H070098040. Cummins QST30-G5 engine rated 1490 HP at 1800 RPM, SN-37229540, EPA Tier 2 emissions. 3/60/120/208V, 12 lead reconnectable to 480V and other voltages. 2500 Amp 100% rated main-line circuit breaker. PMG permanent magnet generator. Oversized 1040 kW rated generator end. Engine cooling radiator rated 50C/122F ambient. UL 2200 listed stationary engine-generator-assembly. PowerCommand 2100 digital control panel. EnerGenius battery charger 10 amp 120/208/240V. Coolant heater 208/240/480V. Aluminum sound attenuated enclosure. 3600 gallon UL2085 sub-base fuel tank, with secondary containment. 792 Hours. Year 2007. Overall dimensions 113W x 341L x 165H, 60,000 lbs. (storage trailer in photo not included) Passed load test 2/11/2025.
MFR: Cummins
Stock No.:
49670009GEA Westfalia CA 220-01-00 Decanter Centrifuge.
Used- GEA Westfalia CA 220-01-00 Decanter Centrifuge. Stainless steel construction (product contact areas), max bowl speed 5500 rpm, 2 phase separation (liquid/solids) design, single row of lined cake solids discharge ports, base, casing, gearbox. On 4 legs. Previously used in an olive oil application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: GEA Westfalia
Stock No.:
50001003Used US Centrifuge Solid Wall Basket Centrifuge
Used- US Centrifuge Solid Wall Basket Centrifuge, Model M412, Carbon Steel. liquid/solids separation, Hinged top cover with feed pipe, bottom driven with motor. Includes a sludge tank with (2) Wilden diaphragm pumps and a control panel with an Emerson Commander SK drive. Mounted on a common frame. Ideal for liquid clarification application.#!
MFR: US Centrifuge
Stock No.:
50420005Industrial Unused - Wilfley Model A7 304L Stainless Steel Pump, 3x1.5x13, 200 GPM, 30 HP
Unused- Wilfley Pump, Model A7, 304L Stainless Steel. Size 3x1.5x13. Approximate 200 gallon per minute. 140 Foot head. Driven by a 30 hp, 3/60/460 volt, 1775 rpm motor. Jacketed casing. Serial # A703032. Built 2018.
MFR: Wilfley
Stock No.:
50420007Unused - Teikoku Model F61-215C4DM-0405SS1-AV 304L Stainless Steel Pump, 3.5 GPM, 30 Ft Head
Unused- Teikoku Pump, Model F61-215C4DM-0405SS1-AV, 304L Stainless Steel. Approximate 3.5 gallons per minute. 30 Foot head. Driven by a 1.7 kW motor. For use in Nitric Acid.
MFR: Wilfley
