Pharmaceutical Equipment
Stock No.:
54234009Eaton F3AVFB01033 Single Bag Filter Housing – 3" Ports, 150 PSI
Used Eaton FLOWLINE Single Bag Stainless Steel Filter Housing. Part# F3AVF001133-V-M6. (1) Filter bag. Filter bag size #2 - 7" diameter x 32" long. 3" Inlet / outlets, 3/4" center bottom outlet with valve. Rated 150psi at 250 degrees F. Serial# F-46561. Mounted on Carbon Steel legs.
MFR: Eaton Dynamics
Stock No.:
54234011Industrial Stainless Bag Filter Housing – Eaton FLOWLINE, Size 2
Used Eaton FLOWLINE Single Bag Stainless Steel Filter Housing. Part# F3AVFB01033. (1) Filter bag. Filter bag size #2 - 7" diameter x 32" long. 3" Inlet / outlets, 3/4" center bottom outlet with valve. Rated 150psi at 250 degrees F. Serial# F-12278. Mounted on Carbon Steel legs.
MFR: Eaton Dynamics
Stock No.:
54234012Used Stainless Steel Bag Filter – 7"x32", 3" Inlet/Outlet, Eaton
Used Eaton FLOWLINE Single Bag Stainless Steel Filter Housing. Part# F3AVFB01133-V-M6. (1) Filter bag. Filter bag size #2 - 7" diameter x 32" long. 3" Inlet / outlets, 3/4" center bottom outlet with valve. Rated 150psi at 250 degrees F. Serial# F-46579. Mounted on Carbon Steel legs.
MFR: Eaton Dynamics
Stock No.:
54429001Used Fitzpatrick Fitzmill Model D Hammer Mill on Mobile Frame with 7.5 HP Motor
Used Fitzpatrick Fitzmill, Model D,. Stationary knives, reversible blade assembly with knives. pan fed, variable speed. Mounted on a frame with casters. Driven by a 7.5 hp, 3/60/130-460V, 1740 rpm motor. Approximate OAD 59" x 26" x 58".
MFR: Fitzpatrick
Stock No.:
54687110Used Littleford Day Mixing Inc 7 cu ft Nauta mixer. Serial number 1109. Model number 094. Mixer has an overall length of 116", a 54.5" diameter, low pressure dimple jacket rated at 14.9 psi, 304 stai...
Used-Littleford Day Mixing Inc 7 cu ft Nauta mixer. Serial number 1109. Model number 094. Mixer has an overall length of 116", a 54.5" diameter, low pressure dimple jacket rated at 14.9 psi, 304 stainless steel, half lids (one missing), knife valve, and 3 hp drive. Requires 230/460 vac 3 phase electrical supply. Good condition.
MFR: Littleford
Stock No.:
54687192Used This is a Perrin 7.25 cu.ft. (approximate) recessed plate filter press. The plates are poly and the skeleton is carbon steel. Filter has 26 each 630 mm x 630 mm x 32 mm deep nongasketed plates....
Used-This is a Perrin 7.25 cu.ft. (approximate) recessed plate filter press. The plates are poly and the skeleton is carbon steel. Filter has 26 each 630 mm x 630 mm x 32 mm deep nongasketed plates. There are (25) 1.25" Chambers. It is plumbed for center feed, 4 eye discharge. This press is equipped with hydraulically assisted mechanical closure. Serial #1598S. Good condition.
MFR: Perrin
Stock No.:
11059358Used Fitzpatrick DAS06 FitzMill Hammer/Knife Mill – Explosion Proof (XP) Motor
Used- Fitzpatrick DAS06 Fitzmill Hammer/Knife Mill. Stainless Steel; Pan Feed; Driven by 7.5 HP, 230/460V, 1740 rpm Explosion Proof (XP) motor. Serial# 10321. Mounted on stainless steel cart with wheels.
MFR: Fitzpatrick
Stock No.:
409351Used Fitzpatrick Fitz-Mill Model D Hammer Mill with VFD Control
Used Fitzpatrick Fitz-Mill Model D Hammer Mill with VFD Control. 5" x 6" feed throat with top hopper. Approximately 12" diameter cutting chamber. (16) 4" long x 1" wide x 1/4" thick fixed blades. Driven by a 7-1/2hp 3/60/220/440 Volt 1750 rpm motor. Includes control panel with GS2 AC Drive. Mounted on a carbon steel frame.
MFR: Fitzpatrick
Stock No.:
51099003Used Twin Motion 65-Gallon Stainless Steel Vacuum Mixer – Jacketed Kettle
Used- Twin Motion Vacuum Mixer, 65 Gallon, Stainless Steel. Approximate 65 gallon jacketed mixing kettle, 30" diameter x 18" straight side, vacuum cover. Anchor style agitator with sidewall scrappers, driven by 7.5 hp motor. Off set high speed disperser, driven by 10 hp, 3/60/575 volt, 1765 rpm motor. Dual post hydraulic lift with hydraulic pump with vacuum pump driven by 3 hp, 3/60/575 volt, 1760 rpm motor. Floor mounted. No manufactures tag.
MFR: Unknown
Stock No.:
52283011Used Entoleter Centrimil Impact Mill – Model FTM
Used- Entoleter Centrimil Impact Mill, Model FTM. Carbon steel construction. Includes 16" diameter rotor with 3/8" diameter pins and 2-part rotating disc. Includes 8" X 3-1/2" top infeed and 6" diameter center bottom discharge. Driven by 7.5 HP, 220/440V, 3-phase, 60 Hz ,3600 RPM motor. Mounted on a frame. Catalog# B-52900-63, Serial# 5807.
MFR: Entoleter
Stock No.:
53656001Used Fitzpatrick DAS06 Stainless Steel Hammer Mill with Screw Feeder
Used Fitzpatrick FitzMill Model DAS06 Stainless Steel Hammer Mill With Screw Feeder, 7.5 HP Drive And 749 Lbs/Hour Capacity. Industrial size reduction mill designed for controlled grinding, milling, granulation and particle size reduction of compatible dry powders, granules and bulk solid materials. Rated for processing capacities up to 749 lbs per hour, depending on material characteristics, screen selection and application, with a stated operating speed range of 1,000 to 4,600 RPM. Features an approximately 15" long x 15" wide x 10" deep feed hopper with an integrated screw feeder measuring approximately 2-1/2" diameter x 58" long. Screw feeder is driven by a 0.33 HP gear motor rated at 1,725 RPM, operating on 208230/460 volts, 3-phase, 60 Hz electrical service, through a 4.88:1 reduction gearbox. Milling chamber measures approximately 11-1/4" long x 6" wide x 16" deep and contains (16) fixed blades with blunt and knife edges, each measuring approximately 1" wide x 3-3/4" long x 1/2" thick. Main milling assembly is driven by a 7.5 HP motor rated at 1,760 RPM, operating on 230/460 volts, 3-phase, 60 Hz electrical service. Equipped with an approximately 9-1/2" long x 5-1/2" wide bottom discharge opening with screen for controlling discharged particle size. Mounted on a mobile stainless steel frame with casters. Serial #7964. Possible applications include dry powder milling, granule sizing, deagglomeration, lump breaking and particle size reduction of compatible pharmaceutical powders, nutraceutical ingredients, food powders, spices, seasonings, powdered chemicals, pigments, mineral powders, polymer additives and other suitable dry bulk solids.
MFR: Fitzpatrick
Stock No.:
54494001Used Blackmer CO2 Gas Compressor Skid with Glycol Cooling System | CO2 Liquefaction Package
Used- Blackmer Gas Compressor Skid with Glycol Cooling System. Compresses CO2 into liquid form. Skid working capacity of 100 - 150 kg/hr (8.16 cubic meters/hr CO2). Skid contains (2) pumps. (1) Blackmer Model HD082C. 7.5 HP. MAWP 350 psia. 8.44 CFM at max rpm. Serial # 2438140, built 2025. (1) Blackmer Model HDL 322C. 15 HP. MAWP 1000 psia. 9 CFM at max rpm. Serial # 202200251, built 2022. System includes Cybernetik coiled pot condenser.
MFR: Blackmer
