Pharmaceutical Equipment

Groen Model DTA-3-60 SP Twin 60 Gallon Kettles

Used-Groen Model DTA-3-60 SP Twin 60 Gallon Kettles with Twin Pivoting Agitator. National Board stamped jackets rated 45 PSI @ 300 Deg F. Stainless steel common frame, rinse faucet. Elec: 3/60/230/460V.

MFR: Groen

Used Sweco 60” Vibro-Energy Separator – Stainless Steel, Model US60S88

Used- Sweco 60" diameter Vibro-Energy Separator, Model US60S88, Stainless Steel. Single deck, single separation. Missing top frame. Driven by 2.5hp 3/60/230/460 volt, 1160rpm motor. Mounted on stainless steel frame with casters. Serial# US60-387-03.

MFR: Sweco

Used Hydro-Pac LX Carbon Dioxide Compressor, Model C02.2-60-1975LX-CO2. Single stage; 400 to 2176 psi suction pressure; 2176 psi max. discharge pressure; Capacity @ 600 psig, 55 degree F inlet: 127 scfm; Capacity @ 870 psig, 55 degree F inlet: 989 scfm; 15 gpm (minimum) cooling water requirements at 60-80 degrees F. 60 HP, 3/60/230/460V motor, 120V control. Built 2020.

Used- Hydro-Pac LX Carbon Dioxide Compressor, Model C02.2-60-1975LX-CO2. Single stage; 400 to 2176 psi suction pressure; 2176 psi max. discharge pressure; Capacity @ 600 psig, 55 degree F inlet: 127 scfm; Capacity @ 870 psig, 55 degree F inlet: 989 scfm; 15 gpm (minimum) cooling water requirements at 60-80 degrees F. 60 HP, 3/60/230/460V motor, 120V control. Built 2020.

Used Atlas Copco Model GA45 Industrial Rotary Screw Air Compressor | 60 HP

Used- Atlas Copco Rotary Screw Air Compressor, Model GA45. Liquid cooled; rated 294 cfm at 107 psi; 107 psig max. discharge pressure; Elektronikon control panel. Driven by a 60 hp, 3/60/230/460 volt, 3550 rpm motor. 17537 load hours.

MFR: Atlas Copco

Used 60kW Caterpillar Natural Gas Generator – Model G3304NA, Enclosed, 3-Phase, Skid Mounted

Used 60kW Caterpillar Natural Gas Generator Model G3304NA, Enclosed, 3-Phase, Skid Mounted; 3 phase, 60Hz, 480V, 1800rpm; load tested & ready to ship.

MFR: Cat

Used Macon MA60S88-DP Vibratory Separator | 60" SS Screens | Wet/Dry Processing

Used Macon Model MA60S88-1DP 60" diameter stainless steel vibratory screener designed for wet or dry processing. Unit features a single-deck, two-separation configuration and is driven by a 2.5 horsepower motor rated for 230/460 volts, 3 phase, 60 hertz, and 1,160 revolutions per minute. The screener is mounted on a painted carbon steel base and has interchangeable parts with Sweco and other brands. Serial number 999294-11-11. Possible applications include wet or dry screening, classifying, scalping, and separating suitable powders, granules, slurries, and other process materials.

MFR: Macon

Used Olympian G60F3 Natural Gas Generator – 60 kW Standby Power Generator with Weather Enclosure (Low Hours)

Used- Olympian Natural Gas Generator, Model G60F3. Rated standby power 60 kW, 75 kVA. Weather enclosure. Engine operates at 1,800 RPM. 3/60/120/208V. 163.2 Hours run. Serial# OLY00000JNGD01498, built 2008.

MFR: Olympian

Used SWECO Vibro-Energy 60" Stainless Steel Vibratory Separator – Double Deck, 3 Separations, 5 HP Motor

Used- Sweco Vibro-Energy 60" Diameter Stainless Steel Vibratory Separator, Model LS60S101588. Double deck, 3 separations. Driven by a 5hp 3/60/230/460v 1120rpm motor. Top clamp on cover with 12" and 6" diameter opening. 8" diameter outlets. Serial# LS60-577-66. Overall dimensions 78" x 72" x 70" Tall. This circular vibratory separator is designed for screening, sizing, classifying, scalping, and separating material into multiple fractions. Possible applications include screening, sizing, classification, scalping, and separation of dry powders, granules, particles, and other free-flowing process materials.

MFR: Sweco

Used SWECO LS60S101588 60" Vibro-Energy Separator – Stainless Steel, Double Deck, 3-Way Screening

Used- Sweco Vibro-Energy 60" Diameter Stainless Steel Vibratory Separator, Model LS60S101588. Double deck, 3 separations. Driven by a 5hp 3/60/230/460v 1120rpm motor. Top clamp on cover with 12" and 6" diameter opening. 8" diameter outlets. Serial# LS60-577-68. Overall dimensions 78" x 72" x 70" Tall. Unit does not come with screens. This circular vibratory separator is designed for screening, sizing, classifying, scalping, and separating material into multiple fractions. Possible applications include screening, sizing, classification, scalping, and separation of dry powders, granules, particles, and other free-flowing process materials.

MFR: Sweco

Unused Deutsche Process Stainless Steel Winterization Skid – (3) 60-Gallon Jacketed Mixing Tanks, Buffer Tank & Triple Bag Filtration System

Unused Deutsche Process Stainless Steel Winterization Skid (3) 60-Gallon Jacketed Mixing Tanks, Buffer Tank & Triple Bag Filtration System. Consisting of (3) Identical 60 Gallon Jacketed Mixing tanks. Tank info: Vertical, Dished top and slight coned bottom. Approximately 28" diameter x 20" straight side. Vessel stamped 304 stainless steel, 90psi. Top entering dual 2 blade propellor agitation 1-1/4" diameter x 36" long shaft. Driven by a .75hp 3/60/208-230/460v 1725 rpm motor, through reducer 1:23.88 ratio. *Only comes with 2 motors*. Openings Top: 14" manway with cover, 2-1/2" for agitator, 2", (3) 1-1/4", approximately 1-1/2" center bottom outlet with ball valve, (1) spray ball. Mounted on (4) stainless steel legs welded to frame, no manufacturers tag. (1) buffer tank, 10" diameter X 20" straight side, tri-clamp cover, 1-1/2" center bottom outlet with ball valve, mounted on 3 stainless steel legs, tri-clamped to frame. (3) bag filter housings, rated 0.6MPa (87psi) at 0 to 140 degrees C (32 to 284 degreed F). 7-1/2" diameter x 37-3/4" straight side housing, with (1) filter basket 7" diameter x 29" long, 1/8" diameter perforations. 1" diameter center bottom outlet with ball valve. mounted on 3 stainless steel legs, bolted to frame. Assorted piping & stainless steel frame.

Unused Deutsche Process Stainless Steel Winterization Skid – Three 60-Gallon Jacketed Mixing Tanks with Triple Bag Filtration

Unused Deutsche Process Stainless Steel Winterization Skid Three 60-Gallon Jacketed Mixing Tanks with Triple Bag Filtration. Consisting of (3) Identical 60 Gallon Jacketed Mixing tanks. Tank info: Vertical, Dished top and slight coned bottom. Approximately 28" diameter x 20" straight side. Vessel stamped 304 stainless steel, 90psi. Top entering dual 2 blade propellor agitation 1-1/4" diameter x 36" long shaft. Driven by a .75hp 3/60/208-230/460v 1725 rpm motor, through reducer 1:23.88 ratio. Openings Top: 14" manway with cover, 2-1/2" for agitator, 2", (3) 1-1/4", approximately 1-1/2" center bottom outlet with ball valve, (1) spray ball. Mounted on (4) stainless steel legs welded to frame, no manufacturers tag. (1) buffer tank, 10" diameter X 20" straight side, tri-clamp cover, 1-1/2" center bottom outlet with ball valve, mounted on 3 stainless steel legs, tri-clamped to frame. (3) bag filter housings, rated 0.6MPa (87psi) at 0 to 140 degrees C (32 to 284 degreed F). 7-1/2" diameter x 37-3/4" straight side housing, with (1) filter basket 7" diameter x 29" long, 1/8" diameter perforations. 1" diameter center bottom outlet with ball valve. mounted on 3 stainless steel legs, bolted to frame. Assorted piping & stainless steel frame.

Used 60 Cu. Ft. Stainless Steel Jacketed Ribbon Mixer

Used 60 cubic foot total capacity stainless steel ribbon mixer with hinged lids and jackets on the long sides of the mixing trough. Jacket is not rated. Mixer interior measures approximately 36" wide x 90" long x 24" straight side. Center bottom discharge is equipped with a 6" flanged outlet. Ends include (2) 3" tri-clamp nozzles. Top features two hinged lid sections with one 13" x 13" rectangular hinged access door, one 8" pipe stub, one 6" tri-clamp connection and (2) 2" tri-clamp connections. Mixer is driven by a two-speed 20/10 hp motor rated at 1,760/880 rpm with gear reducer and requires 460 VAC, 3-phase electrical service. Possible applications include batch mixing and blending of compatible powders, granules, dry ingredients, food products, chemicals, nutraceutical ingredients, plastics and other free-flowing bulk materials.