Pharmaceutical Equipment

Used CPM Cracking Mill – Model DPHX1600-84, 125 HP

Used- CPM Cracking Mill, Model DPHX1600-84. (2) pair of 16" Diameter x 84" Long chilled iron rolls. Carbon steel construction, corrugated rolls, manual roll adjustment. High volume pocket feeder. Driven by a 125hp 3/60/460V 1800rpm motor. Built 2020. Previously used on soybeans.

MFR: CPM

Rebuilt Flottweg Z4E/4-901g Solid Bowl Decanter Centrifuge – Alloy 2.4602, 3200 RPM, 30 kW

Rebuilt- Flottweg Z4E/4-901g Solid Bowl Decanter Centrifuge. Alloy 2.4602 construction (product contact areas); maximum bowl speed 3200 rpm; approximate single lead conveyor with welded hard facing; Back drive with powerpack; feed pipe; lubrication system; adjustable liquid plate dams; Approx. 30 KW; 400/3/50/2956 rpm ABB main drive motor with frame/casing; vibration isolators; safety guards and control. New 2001. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Flottweg

Used Alfa Laval PM-3600 Super-D-Canter Centrifuge | 3,500 RPM | Industrial Liquid-Solid Separation

Used- Alfa Laval / Sharples PM-3600 Super-D-Canter Centrifuge. 316 Stainless Steel construction (product contact areas), maximum bowl speed 3500 rpm, 4-1/2" single lead conveyor, liquid plate dams, gearbox 125:1 ratio, base, casing, approximate 37kw (49.6hp) main drive motor (380/50/3), back drive moto. Mounted on a carbon steel sub-frame with vibration isolators, safety guards.

MFR: Sharples

Used 160 Gallon Feldmeier Reactor, 316L stainless steel construction

Used-160 Gallon Feldmeier Reactor, 316L stainless steel construction, 320 grit and electropolished internal, approximately 48" diameter x 10" straight side, hinged dish top, hemispherical bottom, rated 50 psi and full vacuum at 350 f internal, jacketed for 150 psi at 350 f, anchor agitator with sidewall scrappers, driven by 7.5 hp motor drive, and mechanical seal, bridge mounted tilt out agitation system with hydraulic cylinder and onboard 2 hp hydraulic pump, top mounted baffle, (3)3", 2", (4)1.5" top ports, 2" bottom outlet, on 4 stainless steel legs.

MFR: Feldmeier

Unused Howden ExVel Turbo Fan HBXrG-20/675-LG0 – High-Performance Industrial Fan

Unused- Howden ExVel Turbo Fan, Model HBXrG-20/675-LG0. Maximum inlet volume; 3.18 m3/s, 6738.99 ACFM. Maximum pressure rise; 290.96 kPa, 42.20 PSI. Maximum inlet temperature; 176.7 C, 350.1 F. Maximum outlet temperature; 196.0 C, 384.8 F. Maximum impeller power; 1196 kW, 1603.9 HP. Nominal operation speed; 5681 rpm. Design temperature; 230.0 C, 446.0 F. Design pressure; 1878 kPa(a), 272.2 PSI. Siemens 1500 series PLC and Bently Nevada 3500 monitor system. Serial # NFF00019-10, Built 2020.

2022 Alfa Laval TL15-BFG 139-Plate Gasketed Heat Exchanger

Offered in unused condition, this 2022 Alfa Laval TL15-BFG gasketed plate heat exchanger has 139 plates providing 1,622.1 square feet of transfer area. The unit has a maximum allowable working pressure (MAWP) of 150 PSI at 150F and a minimum design metal temperature (MDMT) of -20F at 150 PSI. It is ASME and National Board stamped, was purchased new, and has never been placed into service. Year 2022. Possible applications include industrial heating, cooling, heat recovery, process temperature control, HVAC, chemical, food and beverage, pharmaceutical, utility, water treatment, and manufacturing processes using compatible liquid products or process fluids.

MFR: Alfa Laval

Unused Alfa Laval TL15-BFG 1,622 Sq. Ft. Plate Heat Exchanger

This unused 2022 Alfa Laval Model TL15-BFG heat exchanger uses a gasketed plate design with 139 plates and 1,622.1 square feet of heat-transfer surface. The unit has a maximum allowable working pressure (MAWP) of 150 PSI at 150F and a minimum design metal temperature (MDMT) of -20F at 150 PSI. It is ASME and National Board stamped, was purchased new, and has never been placed into service. Year 2022. Possible applications include industrial heating, cooling, heat recovery, process temperature control, HVAC, chemical, food and beverage, pharmaceutical, utility, water treatment, and manufacturing processes using compatible liquid products or process fluids.

MFR: Alfa Laval

Alfa Laval TL15-BFG Gasketed Heat Exchanger – 139 Plates, 2022

Manufactured in 2022, this unused Alfa Laval TL15-BFG gasketed plate heat exchanger is configured with 139 plates at 0.4 mm thickness. 1622 square foot. The unit has a maximum allowable working pressure (MAWP) of 150 PSI at 150F and a minimum design metal temperature (MDMT) of -20F at 150 PSI. It is ASME and National Board stamped, was purchased new, and has never been placed into service. Year 2022. Possible applications include industrial heating, cooling, heat recovery, process temperature control, HVAC, chemical, food and beverage, pharmaceutical, utility, water treatment, and manufacturing processes using compatible liquid products or process fluids.

MFR: Alfa Laval

2022 Alfa Laval TL15-BFG 1,622.1 Sq. Ft. Heat Exchanger

This Alfa Laval Model TL15-BFG is a 2022 unused plate heat exchanger with a gasketed 139-plate configuration and 1,622.1 square feet of heat-transfer area. The unit has a maximum allowable working pressure (MAWP) of 150 PSI at 150F and a minimum design metal temperature (MDMT) of -20F at 150 PSI. It is ASME and National Board stamped, was purchased new, and has never been placed into service. Year 2022. Possible applications include industrial heating, cooling, heat recovery, process temperature control, HVAC, chemical, food and beverage, pharmaceutical, utility, water treatment, and manufacturing processes using compatible liquid products or process fluids.

MFR: Alfa Laval

Unused Alfa Laval TL15-BFG ASME Plate Heat Exchanger

Unused since purchased new, this 2022 Alfa Laval TL15-BFG gasketed plate heat exchanger includes 139 plates and carries ASME and National Board stamps. 1622 square foot. The unit has a maximum allowable working pressure (MAWP) of 150 PSI at 150F and a minimum design metal temperature (MDMT) of -20F at 150 PSI. It is ASME and National Board stamped, was purchased new, and has never been placed into service. Year 2022. Possible applications include industrial heating, cooling, heat recovery, process temperature control, HVAC, chemical, food and beverage, pharmaceutical, utility, water treatment, and manufacturing processes using compatible liquid products or process fluids.

MFR: Alfa Laval

Alfa Laval TL15-BFG 139-Plate Gasketed Heat Exchanger – Unused

Designed for gasketed plate heat-transfer service, this unused 2022 Alfa Laval Model TL15-BFG contains 139 plates with a thickness of 0.4 mm. 1,622.1 square feet of heat-transfer area. The unit has a maximum allowable working pressure (MAWP) of 150 PSI at 150F and a minimum design metal temperature (MDMT) of -20F at 150 PSI. It is ASME and National Board stamped, was purchased new, and has never been placed into service. Year 2022. Possible applications include industrial heating, cooling, heat recovery, process temperature control, HVAC, chemical, food and beverage, pharmaceutical, utility, water treatment, and manufacturing processes using compatible liquid products or process fluids.

MFR: Alfa Laval

Unused Alfa Laval TL15-BFG Plate Heat Exchanger – 1,622.1 Sq. Ft.

Featuring 1,622.1 square feet of heat-transfer area, this unused Alfa Laval TL15-BFG gasketed plate heat exchanger was purchased new and never commissioned. The unit has a maximum allowable working pressure (MAWP) of 150 PSI at 150F and a minimum design metal temperature (MDMT) of -20F at 150 PSI. It is ASME and National Board stamped, was purchased new, and has never been placed into service. Year 2022. Possible applications include industrial heating, cooling, heat recovery, process temperature control, HVAC, chemical, food and beverage, pharmaceutical, utility, water treatment, and manufacturing processes using compatible liquid products or process fluids.

MFR: Alfa Laval