Pharmaceutical Equipment

Used ER Manufacturing 13,200 Gallon Vertical Carbon Steel Storage Tank with Cone Bottom

Used ER Manufacturing 13,200 Gallon Vertical Carbon Steel Storage Tank with Cone Bottom. 13,200 gallon/50 cubic meter capacity. 9'3" diameter x 36' overall height. 24" x 36" side manway. 8" center bottom outlet port. 6" internal feed line. Cone bottom. With removable caged ladder. On (4) leg frame.

MFR: ER

Unused Alfa Laval TK20-BWFX Plate and Frame Heat Exchanger – 1,344 Sq. Ft.

Unused Alfa Laval Model TK20-BWFX plate and frame heat exchanger, manufactured in 2024, with approximately 1,344 square feet of heat transfer surface area. Unit is rated for maximum allowable working pressures of 612/235 PSIG at 230F and a minimum design metal temperature of -20F at 612/235 PSIG. Equipped with approximately 0.8 mm plates and an A-dimension of approximately 992 mm. ASME certified and National Board registered, NB No. 65553. Serial number AAN1000484, Alfa Laval order number 18036240. Equipment is identified as a Cathode Cooler, equipment tag NG-21-HX-0001. Certified by Alfa Laval, Richmond, Virginia. Late-model industrial plate and frame heat exchanger suitable for demanding process cooling and heat-transfer applications. Possible applications include liquid-to-liquid process cooling, data center cooling water systems, industrial chilled water systems, heat recovery, cathode cooling, closed-loop process cooling, HVAC heat transfer and other compatible high-capacity industrial thermal management applications.

MFR: Alfa Laval

IN STOCK AND NEW- Paul O. Abbe Model RB-135 Ribbon Blender.

NEW & IN STOCK- Paul O. Abbe Model RB-135 Ribbon Blender. In -Stock .135 Cubic Foot working capacity. 146 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 49.6" wide x 105.5" long x 53.6" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 40 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 33 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 4.7" wide x 19.7" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 28.4" long. Approximately 8" discharge height. Approximate weight 7,920 pounds. Approximate overall dimensions: 64.8" wide x 158.3" long x 84.7" high. Controls are available upon request.

MFR: Paul O Abbe

J.H. Day 135 Cu Ft Ribbon Blender, Stainless Steel, (2) Bag Dump Stations, XP Motor

Used J.H. Day stainless steel double spiral ribbon blender with approximate 135 cu ft capacity. Equipped with top cover, (2) bag dump stations, 30 HP explosion-proof motor and reducer, and center bottom outlet with valve. Serial #85051.

Used Cummins DQGAB 1500 kW Diesel Generator – Tier 2, PMG, Sound Enclosure, UL2085 Fuel Tank

Used-1500 kW standby (1350 kW prime) Cummins diesel generator set model DQGAB, SN-G110233080. Cummins QSK50-G4 engine rated 2220 HP at 1800 RPM, SN-25366503, EPA Tier 2 emissions. 3/60/277/480V, 12 lead reconnectable to other voltages. 2500 Amp main-line circuit breaker. PMG - Permanent magnet generator. Oversized generator end rated 1612 kW. UL 2200 listed package. Engine cooling high ambient air temperature. PowerCommand digital control panel. Battery charger. Coolant heater. Sound attenuated enclosure. 5181 gallon UL2085 listed sub-base fuel tank with secondary containment. 770 Hrs. Year 2011. Passed load test 1/3/2025. Overall dimensions enclosure with genset 150W x 397L x 153H, 51,000 lbs, fuel tank 144W x 397L x 37H 25,389 lbs.

MFR: Cummins

Used Alfa Laval M10-MFG Plate Heat Exchanger – 137.3 Sq. Ft., 100 PSI, Stainless Steel

Used- Alfa-Laval Plate Heat Exchanger, Model M10-MFG. 137.3 Square Feet. (58) 304 Stainless Steel plates, approximately 253mm (9.9") wide x 34" long x 0.40mm thick plates. Rated 100psi at -20 to 190 degrees F. Mounted in expandable frame with (3) legs. Serial# 30105-61105.

MFR: Alfa Laval

Used 13,800 gallon vertical stainless steel clad tank. Tank has 168" diameter x 144" tall, flat bottom, slightly conical top, (2) 3" threaded drains in bottom, side has 3" flanged connection, (2) 1" ...

Used-13,800 gallon vertical stainless steel clad tank. Tank has 168" diameter x 144" tall, flat bottom, slightly conical top, (2) 3" threaded drains in bottom, side has 3" flanged connection, (2) 1" threaded connection, (1) 1.5" flanged connection, 6" cut off pipe, large rectangular manway in top, and has a ladder inside the tank. Fair condition.

Unused CMS 139.2 Sq. Ft. 304L Stainless Steel Shell and Tube Heat Exchanger

Unused CMS Heat Transfer Division 139.2 Square Foot 304L Stainless Steel Horizontal Shell And Tube Heat Exchanger With 150 PSI Pressure Rating. Industrial shell and tube heat exchanger designed for liquid-to-liquid heat transfer, chemical process cooling and industrial temperature control applications. Features approximately 139.2 square feet of heat transfer surface area with (48) straight tubes constructed of 304L stainless steel, each measuring 3/4" in diameter. Shell and tubes are constructed of 304L stainless steel and rated for a maximum allowable working pressure of 150 psi and full vacuum at temperatures ranging from -20 F to 500 F. Process connections include (2) 4" shell-side openings, (2) 3" tube-side openings and (4) 3/4" auxiliary nozzles. Originally designed as a naphthalene cooler, Equipment Tag E-617. Manufactured by CMS Heat Transfer Division, Inc., Bohemia, New York, for Cincinnati Heat Exchangers. Serial #3194.5. National Board #2249. Possible applications include naphthalene cooling, chemical process cooling, liquid-to-liquid heat transfer, solvent temperature control, circulating cooling water systems, heat recovery, industrial oil cooling and thermal management of other compatible chemical and industrial process liquids.

Used Teledyne Readco Continuous Compounder Processor – 28" x 97" Barrel, 125 HP Motor

Used- Teledyne Readco Continuous Compounder Processor. Size approximately 28" diameter x 97" long barrel, Each screw is approx. 14" Diameter. stainless steel contact parts, non-jacketed. 15" x 26" feed section. 6" x 26" discharge section driven by a 125 HP Westinghouse electric motor 3/60/230/460 Volt, 1780 RPM, Dodge TXM gearbox ratio 20.55:1, final output 85 RPM. Includes a removable top cover.

MFR: Teledyne Readco

Used Dorr-Oliver Merco 16L Stainless Steel Decanter Centrifuge – 30 HP

Used Dorr-Oliver / Merco Model 16L Stainless Steel Solid Bowl Decanter Centrifuge With 30 HP Main Drive, ECB Backdrive And 4,000 RPM Maximum Bowl Speed. Industrial horizontal solid bowl decanter centrifuge designed for continuous solid-liquid separation, slurry clarification, solids concentration and mechanical dewatering of compatible process materials. Features 316 stainless steel product-contact construction with a maximum bowl speed of 4,000 RPM for centrifugal separation of suspended solids from liquid process streams. Equipped with a 5" double-lead internal screw conveyor featuring welded hardfacing for increased wear resistance during solids transport and discharge. Includes auger-style solids discharge ports and plate dam liquid discharge for separating and removing solid and liquid phases. Driven by a 30 HP main drive motor with an ECB backdrive for controlling differential speed between the rotating bowl and internal screw conveyor. Includes supporting base, discharge chutes, bowl cover and belt guard. Manufactured by Dorr-Oliver / Merco, Model 16L. Possible applications include industrial wastewater treatment, municipal sludge dewatering, chemical slurry separation, liquid clarification, industrial sludge thickening, starch and food processing waste separation, mineral slurry dewatering, pigment processing and recovery of suspended solids from other compatible industrial liquid streams.

MFR: Dorr Oliver/Merco

Used Dorr-Oliver Merco 16L Stainless Steel Solid Bowl Decanter Centrifuge

Used Dorr-Oliver / Merco Model 16L Solid Bowl Decanter Centrifuge With 316 Stainless Steel Product Contact Surfaces, 30 HP Main Drive And ECB Backdrive. Industrial horizontal solid bowl decanter centrifuge designed for continuous solid-liquid separation, slurry clarification, solids concentration and mechanical dewatering of compatible industrial process materials. Features 316 stainless steel product-contact construction with a maximum bowl operating speed of 4,000 RPM for centrifugal separation of suspended solids from liquid streams. Equipped with a 5" double-lead internal screw conveyor featuring welded hardfacing for increased wear resistance during solids transport and discharge. Includes auger-style solids discharge and plate dam liquid discharge for separating and removing solid and liquid phases. Driven by a 30 HP main drive motor with an ECB backdrive for differential speed control between the rotating bowl and internal screw conveyor. Includes solid bowl assembly, supporting base, discharge chutes, bowl cover and belt guard. Manufactured by Dorr-Oliver / Merco, Model 16L. Possible applications include industrial wastewater treatment, municipal and industrial sludge dewatering, chemical slurry separation, liquid clarification, solids thickening, starch processing, food processing byproduct recovery, mineral slurry dewatering, pigment processing and recovery of suspended solids from other compatible industrial liquid streams.

MFR: Dorr Oliver/Merco

Used Dorr-Oliver 16L Stainless Steel Decanter Centrifuge – 4,000 RPM

Used Dorr-Oliver Model 16L 316 Stainless Steel Solid Bowl Decanter Centrifuge With 4,000 RPM Maximum Bowl Speed And Hardfaced Double-Lead Conveyor. Industrial horizontal solid bowl decanter centrifuge designed for continuous solid-liquid separation, slurry clarification, solids concentration and mechanical dewatering of compatible process materials. Features 316 stainless steel product-contact construction with a maximum bowl operating speed of 4,000 RPM for centrifugal separation of suspended solids from liquid streams. Equipped with a 5" double-lead internal screw conveyor featuring welded hardfacing for increased wear resistance during solids transport and discharge. Includes auger-style solids discharge ports for separated material removal and adjustable liquid plate dams for controlling liquid discharge conditions and separation performance. Features a stainless steel coffin-style casing, Cyclo gearbox, supporting base and main drive guard. Manufactured by Dorr-Oliver, Model 16L. Serial #CH34311SN10MC8. Possible applications include industrial wastewater treatment, sludge thickening and dewatering, chemical slurry separation, liquid clarification, mineral slurry processing, pigment and specialty chemical processing, starch separation, food processing waste treatment and recovery of suspended solids from other compatible industrial liquid streams.

MFR: Dorr Oliver