Pharmaceutical Equipment
Stock No.:
43567033Used Von Roll 630L Glass-Lined Pressure Tank – 166 Gallon, Horizontal, 2 Bar Rating
Used - Von Roll Glass Lined Pressure Tank, 630 Liter (166.48 Gallon), Horizontal. Approximate 27 diameter x 62 straight side. Dished ends, (1) removable. Internal rated 2 bar (psi) at 200 degrees C. (392 F.) Openings top (2) 4, ends 3, 3 end bottom outlet. Mounted on removable saddles with a carbon steel cart with casters. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Von Roll
Stock No.:
10151594Used 16,600 gallon 304 stainless steel tank
Used 16,600 gallon 304 stainless steel tank, jacketed, cone bottom. Manufactured by Mueller. Dished head. 10' 1 7/8" OD x 36' 11 3/8" tall. Shell rated 15 psi @ 100F. Jacket rated 100 psi @ 100F. Weight: 13200 lbs. Built 1995. Serial #164563-1. Previous use: 400 BBL brewery fermentation vessel.
MFR: Mueller Corp
Stock No.:
10151595Used 16,600 gallon 304 stainless steel tank,
Used 16,600 gallon 304 stainless steel tank, jacketed, cone bottom. Manufactured by Mueller. Dished head. 10' 1 7/8" OD x 36' 11 3/8" tall. Shell rated 15 psi @ 100F. Jacket rated 100 psi @ 100F. Weight: 13200 lbs. Built 1995. Serial #164563-2. Previous use: 400 BBL brewery fermentation vessel.
MFR: Mueller Corp
Stock No.:
10151596Used 16,600 gallon 304 stainless steel tank
Used 16,600 gallon 304 stainless steel tank, jacketed, cone bottom. Manufactured by Mueller. Dished head. 10' 1 7/8" OD x 36' 11 3/8" tall. Shell rated 15 psi @ 100F. Jacket rated 100 psi @ 100F. Weight: 13200 lbs. Built 1995. Serial #164563-9. Previous use: 400 BBL brewery fermentation vessel.
MFR: Mueller Corp
Stock No.:
10151597Used 16,600 gallon 304 stainless steel tank
Used 16,600 gallon 304 stainless steel tank, jacketed, cone bottom. Manufactured by Mueller. Dished head. 10' 1 7/8" OD x 36' 11 3/8" tall. Shell rated 15 psi @ 100F. Jacket rated 100 psi @100F. Weight: 13200 lbs. Built 1995. Serial #164563-10. Previous use: 400 BBL brewery fermentation vessel.
MFR: Mueller Corp
Stock No.:
53981003Used Tampa Tank Inc. 16,696 Gallon Stainless Steel API 650 Tank – Model T-501
Used- Tampa Tank Inc. 16,696 Gallon 304 Stainless steel. API Standard 650, Annex S and J, 12th Edition with Addendum 1. 14 diameter x 176" high. Design liquid level of 146" It is designed for a specific gravity of 1.05, an atmospheric design pressure, and a temperature range from a minimum metal temperature of 50F to a maximum design temperature of 100F. The tank was built using 304L stainless steel in two 1/4" thick shell courses and carries the manufacturer's No stress relief was applied. The purchasers tank number is listed as T-501. Built 2015. serial number 6166-A.*** OVERALL DIMS NEED TO BE CONFIRMED ***
Stock No.:
53981004Used Tampa Tank Inc. 16,696 Gallon Stainless Steel API 650 Tank – Purchaser Tank #T-501
Used Tampa Tank Inc. 16,696 Gallon Stainless Steel API 650 Tank Purchaser Tank #T-501, Annex S and J, 12th Edition with Addendum 1. 14 diameter x 176" high. Design liquid level of 146" It is designed for a specific gravity of 1.05, an atmospheric design pressure, and a temperature range from a minimum metal temperature of 50F to a maximum design temperature of 100F. The tank was built using 304L stainless steel in two 1/4" thick shell courses and carries the manufacturer's No stress relief was applied. The purchasers tank number is listed as T-501. Built 2015. serial number 6166-B.*** OVERALL DIMS NEED TO BE CONFIRMED ***
Stock No.:
52304001Groen DR1218 Scraped Surface Heat Exchanger/ Evaporator
Used- Groen Scraped Surface Heat Exchanger/ Evaporator, Model DR 1218, 304 Stainless Steel. Approximate heat surface area 9.5 square feet. Approximate 12" diameter x 18" long, with (3) scrapers. Internal rated 120 psi at 353 degrees F. Cover with 2-3/4" opening, 2" diameter outlet. Bottom driven by a 1hp, 3/60/230/460 volt, 1700rpm motor through a reducer. Includes a Waukesha size 3 pump, driven by a .75hp 3/60/230/460 volt, 1100rpm motor through reducer. Includes blower, and mounted control panel. Mounted on a stainless steel frame. Serial & National Board# 131204
MFR: Groen
Stock No.:
53900001Used Hiller Decanter Centrifuge – Model DECAPAC DP45-432 (125 GPM, 50 HP, Trailer-Mounted)
Used- Hiller Decanter Centrifuge, Model DECAPAC DP45-432. 125 GPM capacity; 3500 RPM max. operating speed; 3800 RPM max. bowl speed; 93 lbs/cubic foot max. feed density; Duplex stainless steel bowl material; 17.72" inside bowl diameter; .43" bowl wall thickness; 122 degrees F max. ambient operating temperature; 0 bar max. ambient operating temperature. Driven by a 50 HP, 3550 RPM, 60/460V motor. SN #JS00100. Installed in 40' trailer. 8' x 10' office in nose of trailer.
Stock No.:
53458008Brew Tank, Model WP-30BBL. 30 BBL Capacity
Used- Brew Tank, Model WP-30BBL. 30 BBL Capacity, approximately 1700 gallons capacity. 304 Stainless Steel. Approximately 82" diameter x 66" straight side. Dished Top, Slight Cone Bottom. Openings Top: 20" manway, 4", 3", Side: 1-1/2", 1", (2) 1-1/2" side bottom, 2" center bottom outlet, with 9" discharge height. Mounted on (4) stainless steel legs. Serial# WP-498-30BBL.
Stock No.:
54298001Used Yamato Spray Dryer Model DL-41 – Lab-Scale Fine Particle Spray Dryer
Used Yamato Model DL-41 Laboratory Spray Dryer is a compact, laboratory-scale spray drying system designed for the production of fine powders from liquid samples in research, product development, and pilot-scale applications. This versatile unit is capable of producing fine granules with particle sizes ranging from approximately 40 to 100 microns, while offering a maximum water evaporation capacity of approximately 3,000 mL per hour for efficient drying performance. The system features an adjustable operating temperature range from 40 to 300 degrees C (104 to 572 degrees F) and accommodates liquid feed rates of up to 80 mL per minute, providing excellent process flexibility for a wide variety of formulations. The unit is equipped with a two-fluid atomizing nozzle incorporating a 0.7 mm orifice for consistent atomization and uniform particle production. The spray dryer includes an approximately 17-3/4" diameter x 39" high glass drying chamber, allowing clear visual observation of the drying process, along with a 3-1/2" diameter x 6" straight-side cyclone separator and a 3-3/4" diameter x 9-3/4" straight-side collection jar for efficient powder recovery. The electrically heated system operates on 220 Volt power and is mounted on casters for convenient mobility within laboratory or pilot plant environments. Designed for laboratory-scale drying of solutions, suspensions, and extracts, the Yamato DL-41 is ideally suited for research and development as well as pilot-scale work in the pharmaceutical, nutraceutical, food ingredient, chemical, biotechnology, and plant extract industries. It is an excellent choice for producing uniform fine powders in the 40 to 100 micron range with repeatable, controlled processing. Serial # B0400003.
MFR: Yamato