Food and Beverage Equipment
Stock No.:
41955023Used Lodige FKM 3000 D 3,000-Liter Stainless Steel Plow Mixer – Jacketed Heating & Cooling Design
Used- Lodige Plow Mixer, Model FKM 3000 D. 3,000-liter capacity and stainless steel interior. Mixer features double-wall construction for heating or cooling and has (3) openings for knife heads; knife heads are not included. Unit is equipped with cleaning flaps and includes a control cabinet and circuit diagram. Built in 2010. Possible applications include industrial mixing and blending processes requiring heating or cooling for suitable powders, granules, and other bulk products.
MFR: Lodige
Stock No.:
42765009Used – SEITZ ORION 100/200 Stainless Steel Filter Press – 48 m² Filtration Surface, Brewery Application
Used SEITZ ORION 100/200 Stainless Steel Filter Press 48 m Filtration Surface, Brewery Application. With a 150 hl/hour (3962.5 US gallon/hour). Currently fitted with 24 chambers & 2 end plates 1000 x 1000 mm (39" x 39"). Current filtration surface is 48 m2 (516.66 sq. ft.). Hydraulic operated. On 4 legs. Includes: (1) Kieselguhr preparation tank with agitator, (1) Dosing pump, (1) GEA beer pump, (1) Hopper with geared endless screw, Diaphragm pump for kieselguhr discharge and additional infrastructure. Previously used in a brewery application. Asking price includes proper marking, dismantling and loading to truck at location.
MFR: Seitz Orion
Stock No.:
45053363Unused- Schlueter Eductor / Pump Hopper, 304 Stainless Steel
Unused- Schlueter Eductor / Pump Hopper, 304 Stainless Steel, Vertical. Approximate 36" diameter x 26" long cone bottom. Vibrator bracket, requires vibrator. Openings top: (2) 6", (2) 2". 4" Center bottom outlet. Mounted on (4) legs.
Stock No.:
45053443Used Nu-Con Model NCVR-18-8-3T Stainless Steel Tank
Used-Nu-Con Model NCVR-18-8-3T Stainless Steel Tank. Unit is mounted on casters, serial number: N08060-GA-106. 304 stainless Steel, interior ground to a #4 150 grit finish. No cover. Has a 24" discharge height from floor to the bottom of the flange.
Stock No.:
45141013Used Hosokawa Vrieco Nauta Mixer DBXE-1000R – 304 Stainless, Vortex Gate Valve, 86"x60"x16", Machine #M18955
Used- Hosokawa Vrieco Nauta Mixer, Machine # M18955, Mixer Type DBXE-1000R. 86" x 60" x 16", 304 Stainless Steel. Has an air controlled salina vortex roller gate style valve. Serial # 280/5247 ** SALE SUBJECT TO SELLER'S APPROVAL **
MFR: Nauta Mixer
Stock No.:
45141014Used 65 GPM Direct Steam Injection VTIS Sterilization System
Used- Direct Steam Injection Sterilization System, 65 GPM. Vacuum Thermal Instant Sterilization (VTIS) is designed to sterilize fermentation media at temperatures up to 290F for 20 second hold time. Product is pre-heated to 175F before going into the Hydrothermal Steam Injector. The Steam injector puts steam in direct contact with the product and then it goes into the flash chamber, which removes the extra water added from the condensed steam. Then the sterilized product is cooled to the final temperature in the Regeneration Heat Exchanger section. Upon exiting the regen section, the product goes from the VTIS Skid to the fermenter.
Stock No.:
46981001Used Fluid Air Fluid Bed Dryer Granulator
Used- Fluid Air Fluid Bed Dryer Granulator, Model 0020. 316 Stainless steel product contact parts, currently set up with dryer chamber, chamber designed to handle Wurster coating with change parts, electrically heated with 12 kw heater, blower, with on board plc controls with HMI interface, 575 volt. Serial # 10169. Built 1999.
MFR: Fluid Air
Stock No.:
47147038Used Peerless DA200 1,500-Lb Stainless Steel Double Sigma Mixer – 50 HP, Hydraulic Tilt, VFD Controls
Used- Peerless Model DA200 Stainless Steel Double Sigma Mixer. 1500 lb dough capacity. Stainless steel bowl and arms. Painted frame. Hydraulic tilt. 50 HP motor, 3 phase, 60 cycle, 460 volts with VFD (programmed for two speeds). Control panel with timers/starters/VFD. Rebuilt by BTE in 2016.
MFR: Peerless
Stock No.:
48744024Used Pieralisi Maior 3 Decanter Centrifuge
Pieralisi Maior 3 Decanter Centrifuge. Stainless Steel construction (product contact areas). Maximum bowl speed 4000 rpm, single row cake discharge ports, conveyor, casing, gearbox, Approx 22 HP 380/3/50 drive motor. On 4 legs. Reported rebuild. Previous used in an olive oil application. Used. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Pieralisi
Stock No.:
48963002Used Econotherm GG1922/CS/S/S Industrial Heat Pipe Heat Exchanger – 1.92 MW
Used- Econotherm Model GG1922/CS/S/S Industrial Heat Pipe Heat Exchanger / Waste Heat Recovery System Designed for Southwire Company (2025) Econotherm (UK) Ltd., Model GG1922/CS/S/S industrial heat pipe heat exchanger and waste heat recovery system, engineered and designed for Southwire Company LLC for recovery of thermal energy from high-temperature industrial exhaust gases. The system utilizes Econotherm's proprietary sealed heat pipe technology to transfer waste heat from hot process exhaust gases to a separate incoming fresh-air stream, providing energy recovery without direct mixing of the two air streams. Designed to improve overall thermal efficiency, reduce fuel and energy consumption, and lower industrial operating costs by capturing heat that would otherwise be discharged to the atmosphere. The heat exchanger is designed for a nominal heat recovery capacity of approximately 1,921,553 watts (1.92 MW), equivalent to approximately 6.56 million BTU/hr, with an exhaust gas mass flow rate of 42,640 kg/hr (approximately 94,005 lb/hr) and fresh-air mass flow rate of 40,690 kg/hr (approximately 89,706 lb/hr). Under the specified operating conditions, the system is designed to receive exhaust gases at approximately 260C (500F) and reduce their temperature to 113C (235F), while simultaneously heating incoming fresh air from approximately 38C (100F) to 207C (405F). Designed for continuous industrial operation with a minimum anticipated equipment design life of 20 years. The heat recovery assembly incorporates a heavy-duty carbon steel casing with insulated construction and multiple heat pipe banks manufactured from ASTM A179 cold-drawn seamless carbon steel tubing. The individual sealed heat pipes utilize specially prepared water as the internal working fluid, providing efficient thermal transfer through a continuous evaporation and condensation cycle. The heat pipe arrangement provides heat transfer between the exhaust gas and fresh-air streams while maintaining
