Food and Beverage Equipment
Stock No.:
53587001Unused Tarmac Int. Inc. Heat Exchanger – 768 Sq. Ft., 1.8 MMBTU/H, Stainless Steel
Unused- Tarmac Int. Inc Heat Exchanger, (Never set up on the Hot side). Model 48-30DPL48-0.625-IU. 768 sqft. Stainless steel. Size: 48"*48"*54.25, CFM: 8100 CFM. Material: High temperature SST, Surface area: 768 Ft square. Total heat transfer rate: 1.8 MMBTU/Hour. Type: Plate/plate heat exchanger. Max Temp Hot Gas Inlet: 662 F. Efficient: 64.3%. Suitable to handle particulate gases from solid combustion and also applicable in clean combustion Outlet temp hot side: 249F , 11 GA. 304 S.S. casing with 18 GA. 304 S.S. expansion joints at 3 connections, 12 Ga. C.S. cladding with 3 x 3 x C S flanges primed and painted. STRUCTURAL STAND EQUAL TO OR LESS THAN 5 HEAT EXCHANGER ELEVATION. Year 2021. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
Stock No.:
53267147Used Smithco Model 1F30-111-2 Four-Bundle Fin-Fan Cooler Package – Natural Gas & Lube Oil Air-Cooled Heat Exchanger System
Used Smithco Model 1F30-111-2 Four-Bundle Fin-Fan Cooler Package Natural Gas & Lube Oil Air-Cooled Heat Exchanger System. S/N 108432-B. Overall dimensions are 31.5' long X 11.1' wide X 12.67' tall. Unit consists of (2) lube oil coolers, Natural gas cooler #1 and Natural gas cooler #2. Lube cooler 1 has 3" 300# inlet and outlet and (98) 1" 304 stainless steel tubes configured in 4 rows 2-pass 30' long. Fin type L-tension aluminum. Rated 330 PSIG @ -20 to 350 F. Bare Sq ft. 770.3, Extended Sq Ft. 16,310. Natural gas cooler CLR-1 has 6" 300# inlet and outlet and (34) 1.25" 304 tubes configured in 4 rows 2-pass 30' long. Fin type L-tension aluminum. Rated 300 PSIG @ -20 to 350F. Bare Sq ft. 334, Extended Sq Ft. 6,542. Lube cooler 2 has 2" 300# inlet and outlet and (54) 1" 304 stainless steel tubes configured in 4 rows 2-pass 30' long. Fin type L-tension aluminum. Rated 450 PSIG @ -20 to 350 F. Bare Sq. ft. 424.4 Extended Sq ft 8,986. Natural gas cooler CLR-2 has 4" 300# inlet and outlet and (26) 1.25" 304 stainless steel tubes configured in 4 rows 2 pass 30' long. Fin type L-tension aluminum. Rated -20 to 350 F. Bare Sq ft. 255.4, Extended Sq. ft. 5,003. Unit has (2) 20HP COFIMCO model 49 5000 fans 10' diameter consisting of (5) aluminum blades with adjustable pitch and 10 degree angle. Motors are 3/60/460 volt. Fans driven by belt driven speed reducer. Rated 122,800 ACFM. Galvanized structure. Built 2010, Weight 22,800#.
MFR: Smithco Engineering
Stock No.:
53267156Smithco Four-Bundle Air-Cooled Heat Exchanger Package for Natural Gas Compression and Lube Oil Cooling Operations
Smithco Four-Bundle Air-Cooled Heat Exchanger Package for Natural Gas Compression and Lube Oil Cooling Operations. S/N 108432-B. Overall dimensions are 31.5' long X 11.1' wide X 12.67' tall. Unit consists of (2) lube oil coolers, Natural gas cooler #1 and Natural gas cooler #2. Lube cooler 1 has 3" 300# inlet and outlet and (98) 1" 304 stainless steel tubes configured in 4 rows 2-pass 30' long. Fin type L-tension aluminum. Rated 330 PSIG @ -20 to 350 F. Bare Sq ft. 770.3, Extended Sq Ft. 16,310. Natural gas cooler CLR-1 has 6" 300# inlet and outlet and (34) 1.25" 304 tubes configured in 4 rows 2-pass 30' long. Fin type L-tension aluminum. Rated 300 PSIG @ -20 to 350F. Bare Sq ft. 334, Extended Sq Ft. 6,542. Lube cooler 2 has 2" 300# inlet and outlet and (54) 1" 304 stainless steel tubes configured in 4 rows 2-pass 30' long. Fin type L-tension aluminum. Rated 450 PSIG @ -20 to 350 F. Bare Sq. ft. 424.4 Extended Sq ft 8,986. Natural gas cooler CLR-2 has 4" 300# inlet and outlet and (26) 1.25" 304 stainless steel tubes configured in 4 rows 2 pass 30' long. Fin type L-tension aluminum. Rated -20 to 350 F. Bare Sq ft. 255.4, Extended Sq. ft. 5,003. Unit has (2) 20HP COFIMCO model 49 5000 fans 10' diameter consisting of (5) aluminum blades with adjustable pitch and 10 degree angle. Motors are 3/60/460 volt. Fans driven by belt driven speed reducer. Rated 122,800 ACFM. Galvanized structure. Built 2010, Weight 22,800#.
MFR: Smithco Engineering
Stock No.:
54142001Used Multistack / Airstack Free Cool Chiller – Model ASP030XC13H2AS1AAAS-410A
Used Multistack / Airstack Free Cool Chiller Model ASP030XC13H2AS1AAAS-410A. Rated 78.8 tons. 206 GPM total flow rate (68.7 per module). System consists of (4) modules, (3) Free Cool chiller modules and (1) glycol feeder module with 50 gallon reservoir. R-410A refrigerant, 125lb charge per module. 3/60/460V.
Stock No.:
54234016Used Xylem Shell & Tube Heat Exchanger – 150 PSI Pressure Rating, Built 2018
Used 2018 Xylem horizontal U-tube heat exchanger with approximately 78 square feet of heat transfer surface. Unit has (22) 304 stainless steel 3/4" diameter tubes and an approximately 8" diameter x 108" long carbon steel shell with sheathing. Shell and tubes are rated for 150 psi at -20 to 375 F. Connections include (2) 2" shell openings, (2) 2" tube openings, 3/4" vent, and (2) 1/2" drains. Serial number 285806-03, National Board number 314565. Overall dimensions are approximately 118" x 54" x 34" tall. Possible applications and suitable products include industrial heating, cooling, heat recovery, and liquid-to-liquid heat transfer service for compatible process fluids.
Stock No.:
54687013Used Wyssmont Turbo-Dryer 78" Rotary Tray Dryer
Used Wyssmont Turbo-Dryer rotary tray dryer equipped with (17) rows of 78" diameter rotating trays with stationary wipers. Trays are approximately 19.25" wide and constructed of stainless steel and carbon steel, including some carbon steel replacement trays. Dryer is natural gas fired and includes gas train and burner. Product inlet measures approximately 15" x 4.75" at the top of the dryer, with a 5" x 15" bottom discharge outlet with reducer and a 21" x 33" exhaust outlet. Tray system is driven by a 3/4 hp, 1,750 rpm, 90 VDC motor with reducer. Approximate discharge height is 24" and overall height is 155". System includes a cleated belt feed conveyor, natural gas train and burner. Wyssmont Turbo-Dryers utilize vertically stacked rotating trays with stationary wipers to progressively transfer material from one tray to the next while heated air or gas circulates through the drying chamber. Possible applications include continuous drying of compatible powders, crystals, granules, pellets, flakes and other suitable free-flowing or process materials requiring controlled thermal drying.
MFR: Wyssmont
Stock No.:
51258012Used SPX Marley NC8409U Crossflow Cooling Tower – 790 Ton/Cell | 2018 Build | 4-Cell Industrial System
Used SPX Marley NC8409U crossflow cooling tower system featuring a 4-cell industrial configuration with an approximate combined cooling capacity of 790 tons. Each cell is rated for approximately 1,650 GPM, providing a total system flow of 6,600 GPM. Designed for cooling water from 109.0 F hot water temperature to 85.0 F cold water temperature with a 76.0 F entering wet bulb temperature. Each cell is equipped with a 12' diameter, 5-blade fan driven by a 50 HP motor operating at 1,800 RPM with 60 Hz, 230/460V electrical service. Built in 2018.
MFR: SPX
Stock No.:
10151512Used Rosenmund 8 Square Meter Nutsche Filter – 304 Stainless Steel, Liquid Discharge
Used- Rosenmund 8 Square Meter Nutsche Filter, 304 Stainless Steel. Liquid discharge. 304 stainless steel shell, jacket, and internal. Shell rated 50 psi/FV at 370 degrees F. Half pipe and bottom plate jacket rated 150 psi/FV at 370 degrees F. Base rated 150 psi/FV at 370 degrees F. 20 hp main drive; hydraulic pack. Built 1991.
MFR: Rosenmund
Stock No.:
47147030Used Buhler DFMF-2-P-RF Stainless Steel Plow Mixer with HMI Controls – 12.8 Cu. Ft. Capacity
Used- Buhler Model DFMF-2-P-RF Stainless Steel Plow Mixer. Designed for efficient blending and mixing applications. The unit has an approximate full capacity of 12.8 cubic feet and a working capacity of approximately 8.5 cubic feet. Constructed of stainless steel, the mixer is non-jacketed and features a hinged cover equipped with grid safety bars for operator protection. Mixer includes an infeed opening measuring 38" long by 5.5" wide and a discharge gate measuring 41" long by 5.25" wide. The discharge height is approximately 48", the infeed height is approximately 80". The unit is powered by a 3.6 kW (4.9 HP), 480-volt, 3-phase, 60 Hz motor, and is supplied with a control panel featuring an HMI for user-friendly operation and process monitoring. Serial # 10335419, Built 2003. The mixer occupies an approximate footprint of 5' by 10', making it suitable for a variety of production environments requiring reliable and consistent mixing performance.
MFR: Buhler Inc.
Stock No.:
54312001Used Budzar Water-Cooled Chiller Model 2WT-930-D/AC-8-SP – 8 Ton (2019)
Used- Budzar Water-Cooled Process Chiller, Model 2WT-930-D/AC-8-SP. Features 8-ton cooling capacity and 9 kW heating capacity for industrial process heating and cooling applications. Unit has a Zone 1 design flow rate of 30 GPM at 32 psi and a chiller pump rated at 19 GPM at 41 psi. Uses R-407C refrigerant and has a design temperature range of 4 to 124 degrees C (39 to 255 degrees F). Electrical requirements are 460V, 3-phase, 60 Hz. Serial #201801-32852. Suitable applications include plastics processing, injection molding, extrusion, chemical processing, and temperature control of jacketed tanks, reactors, molds, and other industrial process equipment.
MFR: Budzar
