Food and Beverage Equipment
Stock No.:
47233001Unused Hughes-Anderson 2-Pass Shell & Tube Heat Exchanger – 7,110 Sq. Ft., 600 PSI
Unused- Hughes-Anderson 2 Pass Shell & Tube Heat Exchanger, 7,110 Square Feet, Type AET, Size 52" x 28', Horizontal. Carbon steel shell rated 600 psi/Full Vacuum at -50 to 400 degreesF. (989) 1" Diameter x 28 long carbon steel tubes rated -50 to 500 psi/Full Vacuum at 400 degrees F. Openings shell (2) 10", openings for tubes (2) 14". Mounted on saddles. Serial# 9683-1, National Board# 6006, built 2008.
MFR: Hughes Anderson
Stock No.:
47233002Industrial Unused Hughes-Anderson 2-Pass Shell & Tube Heat Exchanger – 7,110 Sq. Ft. | Horizontal
Unused- Hughes-Anderson 2 Pass 7,110 Square Feet, Type AET Shell & Tube Heat Exchanger, Size 52" x 28'. Horizontal. Carbon steel shell rated 600 psi/Full Vacuum at -50 to 400 degreesF. (989) 1" Diameter x 28 long carbon steel tubes rated -50 to 500 psi/Full Vacuum at 400 degrees F. Openings shell (2) 10", openings for tubes (2) 14". Mounted on saddles. Serial# 9683-2, National Board# 6007, built 2008.
MFR: Hughes Anderson
Stock No.:
10128083Used Alar Auto-Vac Model 660 Rotary Vacuum Drum Filter – Stainless, Self-Cleaning, 113 Sq. Ft. Used Alar Auto-Vac Model 660 Rotary Vacuum Drum Filter – Stainless, Self-Cleaning, 113 Sq. Ft.
Used- Alar Engineering Corporation Auto-Vac, Rotary Vacuum Drum Filter System, Model 660 . 6' x 6' stainless steel drum with approximately 113 sq.ft. of filter area. Equipped with auto advancing knife discharge, receiver and pre-mix tanks, 40 hp vacuum pump and control pannel. 460 vac 3 ph and 120 vac 1 ph power required. Automatic, self-cleaning wastewater treatment system for a variety of water-based effluents. Filter drum skid 118" wide x 152" long x 94" tall. Drum is 72" OD x 75" long. Tank skid is 93" wide x 186" long x 112" tall.
MFR: Alar Engineering
Stock No.:
13880001Used Alar Auto-Vac 6120 Rotary Vacuum Drum Filter | 6' x 12' | Trailer-Mounted Mobile Dewatering System
Used- Mobile Alar Auto-Vac Model 6120 Rotary Vacuum Drum Filter System, Trailer Mounted Mobile. 6' diameter by 12' long drum, providing approximately 226 sqft. of effective filter surface area. Designed for high-capacity solid-liquid separation, the unit operates continuously under vacuum pressure to efficiently remove suspended solids. The system is mounted on a skid trailer mounted, with a footprint of roughly 10' x 17' and includes an auxiliary skid measuring approximately 8'4" x 18'9". With a total connected horsepower of about 99 HP and a shipping weight near 18,000 lbs, the 6120 is built for demanding applications in wastewater treatment, chemical processing, and other industrial operations requiring reliable dewatering performance. More information about this trailer mounted system upon request. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Alar Engineering
Stock No.:
54035001Beltomatic 205BX Belt Dehydrator – 60 Sq. Ft., 300 lbs/hr Water Removal, Low Hours
Used Beltomatic Belt Dryer/Dehydrator, Model 205BX. Approximate web 6' wide x 12' length. Effective square foot area 60. 2 Million btu rating per hour, 7,500 maximum cfm. Capable temperature of 295 degrees F, 5-7 psi. Maximum 300lbs water evaporation. Fines conveyor in the bottom of dryer. Adjustable leveling gate; Variable speed web. Burner fan and exhaust fan. LP or natural gas. Approximately 4734 hours. Serial # 21B0726N. New in 2019.
MFR: Belt-O-Matic
Stock No.:
54352006Imperial Systems Industrial Cyclone Dust Collector – 72" Carbon Steel Cyclone
Used Imperial Systems carbon steel cyclone with an approximate 72" diameter upper section tapering to approximately 24" diameter. Unit includes structural support frame and rotary valve. Possible applications and suitable products include industrial dust collection, particulate separation, bulk material handling, and removal of compatible dust or solids from process air streams.
MFR: Imperial
Stock No.:
54352007Industrial Cyclone Dust Collector 72" to 24" with Rotary Airlock
Used Imperial Systems Cyclone, Carbon Steel. Approximate 72" diameter to 24" diameter cyclone. With frame & rotary valve. Not Installed. Possible applications and suitable products include industrial dust collection, particulate separation, bulk material handling, and removal of compatible dust or solids from process air streams.
MFR: Imperial
Stock No.:
54565001Used Munson CM-72x20 Rotary Continuous Mixer – 72" Diameter x 20' Long Drum, 10 HP
Used Munson Rotary Continuous Mixer, Model CM-72x20. Driven by a 10HP 3/60/230/460v 1755rpm motor. Heavy-duty rotary drum continuous mixer featuring an approximately 72" diameter x 20' long rotating drum. Designed for continuous blending of powders, granules, flakes, pellets, and other bulk solids. Provides gentle yet highly uniform mixing with low energy consumption and short residence times. Suitable for food products, chemicals, minerals, fertilizers, plastics, pigments, and specialty materials. Built 2021.
MFR: Munson Machinery
Stock No.:
53824001Used Phlauer / A&J Mixing Modular Paddle Mixer – 74 Cu. Ft., 30 HP, 304 Stainless Steel
Used- Phlauer / A&J Mixing Modular Paddle Mixer, Model AJSP 486-6 SPSS. Approximate 74 cubic feet, 304 stainless steel. Non-jacketed trough approximate 48" wide x 78" long x 44" deep. 5" Diameter shaft with (16) 13-3/4" x 6-3/4" x 3/8" thick paddles welded on 2" diameter posts. Driven by a 22kW (30 hp), 3/60/230/460 volt, 1770 rpm gear motor, 75.69 to 1 ratio, final rpm 23. Openings top: 12", 2-3/4", side: (4) 30" x 15-1/2" hinged inspection doors. 14" x 8" End bottom discharge with pneumatic discharge valve. Includes outboard roller bearings, air seals, and a control panel. Mounted on (4) stainless steel legs. Serial# 99111.
MFR: Phlauer
Stock No.:
50467028PulsaFeeder 7440-S-AE Metering Pump – 5 HP, 230/460V, XP Motor
Used- PulsaFeeder Diaphragm Metering Pump, Model 7440-S-AE, series 40, nominally rated 8.55 gph at 330 psi, with 5 hp, 230/460 volt XP motor, Serial # 9560471-2.
Stock No.:
53267059Sistersville Tank Works Incorporated Shell and Tube Heat Exchanger
Used- Sistersville Tank Works Incorporated Shell and Tube Heat Exchanger. Approximately 745 square foot 316L stainless steel 20" diameter X 20' face to face length. 316L SS shell side rated 150 PSI @ 20 to 320 degrees F. (190) 3/4" 316L SS tubes rated 150 PSI @ 20 to 305 degrees F. 3" Process nozzles with 1" vent and drain. 3" service nozzles. NB# 3879, S/N: 06- 290. Built 2007. Weight 6150#. Missing one head
MFR: Sisterville Tank Works
