Food and Beverage Equipment
Stock No.:
41174076Used GEA Westfalia Fishmaster CF 5000 Decanter Centrifuge | Fish Oil & Protein Processing
Used GEA Westfalia Fishmaster CF 5000 Decanter Centrifuge | Fish Oil & Protein Processing. Alloy 2304 (1.4462) stainless steel (product contact areas). Max bowl speed 4000 rpm, 2 phase separation (liquid/solids) design, single row of lined cake solids discharge ports, base, casing, gearbox, back drive and control panel. Previously used in a Fish oil application. New year 2015. Reposted rebuild. Our freight specialists can assist you with door-to-door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: GEA Westfalia
Stock No.:
41174077Used Alfa Laval DSNX 4850 Decanter Centrifuge. Stainless steel (product contact areas). Max bowl speed 3650 rpm, 2 phase separation (liquid/solids) design. Bowl dia: 480/263 mm (18.7/10.2), Bowl beach angle: 10°, 250 mm (10") pitch, conveyor flights are protected with around 200 tungsten carbide tiles, single row of 360 deg lined cake solids discharge ports, base, casing, gearbox 6 kNm, back drive 1:169 and Alfa Laval control panel with ABC controller. Previously used in a Medical WWT applicati
Used Alfa Laval DSNX 4850 Decanter Centrifuge for Sludge Dewatering | Medical & Industrial WWT. Stainless steel (product contact areas). Max bowl speed 3650 rpm, 2 phase separation (liquid/solids) design. Bowl dia: 480/263 mm (18.7/10.2), Bowl beach angle: 10, 250 mm (10") pitch, conveyor flights are protected with around 200 tungsten carbide tiles, single row of 360 deg lined cake solids discharge ports, base, casing, gearbox 6 kNm, back drive 1:169 and Alfa Laval control panel with ABC controller. Previously used in a Medical WWT application for sludge dewatering.
MFR: Alfa Laval
Stock No.:
41174079Used Alfa Laval NX 438B-31G Solid Bowl Decanter Centrifuge – 316 SS High-Speed Separation System
Used- Alfa Laval NX 438B-31G Solid Bowl Decanter Centrifuge. 316 Stainless Steel construction (product contact areas). Maximum bowl speed 3650 RPM. 360 deg single row of lined cake discharge ports with wear liners, liquid plate dams, base, stainless steel casing, gearbox, 55 kW (82.5 HP), 3/50/400-Volt main drive motor. 3.5 KN gearbox. Hydraulic back drive. Frame mounted on (4) legs. Control panel. Previously used in a fishmeal/oil application. Our Freight specialists can assist with any customs documentation to insure a smooth transition.
MFR: Alfa Laval
Stock No.:
54436001Used PTI Trident 6500 Sheet Extrusion Line – 6.5" 500 HP High-Output Plastic Sheet Production System
Used- PTI Trident Sheet Extrusion Line, Model 6500. 6.5" screw diameter. 36:1 L/D. 500 HP, 1800 RPM main drive. With Flender gearbox; PTI model H6018 sheet takeoff system; Revolution Roll stand; EDI 54" W dies; Sandvik 60" stainless steel belt, water cooled dual zone cooling system; pull rolls; trim saws (capable of max. thickness of 1.25"); Vulcan automatic sheet-stacker (capable of .25-.75 thickness, up to 120" length); dust collector; granulation equipment. Titan PLC control system. 3/60/460V. Built 2006.
MFR: PTI
Stock No.:
54444001Unused Paul O. Abbe BM-223 Ball Mill – Stainless Steel Industrial Grinding Mill
Unused Model BM-223 all-stainless-steel ball mill featuring a 2 tapered cylinder for full discharge and a split, hinged clamshell dry discharge housing. The cylinder measures 40 inches in diameter by 44 inches long inside the shell, with an internal finish of 32 RA (180 grit polish) and a shell thickness of 5/8 inch. The cylinder and product-contact surfaces are constructed of 304 stainless steel. Welded lifter bars terminate 1.5 inches from the ends, with welds laid down and ground to a minimum 1/4 inch radius and finished pit-free. The total mill volume is 32 ft (234 gallons), with a dry working volume of 8 ft (25% of total). The unit includes a 13.25 inch by 14.75 inch rectangular cover hatch frame welded into the side of the mill, a stainless steel grinding cover contoured to the inside radius, and a stainless steel dry discharge cover with 0.25 inch slots. The dry discharge housing fully encloses the mill cylinder to capture and direct solids to a chute or hopper, utilizing the patented 2 taper for full discharge (US Patent 10,086,379, Oct 2, 2018). The clamshell housing design incorporates stainless counterweights and stainless steel construction, with a nominal 60 chute/hopper below the mill and a 12 inch square bottom opening. Housing product-contact surfaces are 304 stainless steel with a 32 RA (180 grit polish) finish. Discharge height is 48 inches from hatch to floor. Additional features include a sliding UHMW cover on top of the housing. The mill drive is an SEW hollow bore, 20 HP TEFC motor rated for 230/460 volt, 3-phase, 60 Hz operation, providing a nominal cylinder speed of 24 RPM. The system is supported by two welded A" frame stands with box-style extensions for added height, constructed of carbon steel and coated with Sherwin-Williams Tile Clad epoxy. Overall dimensions are 138 inches high by 105 inches long by 64 inches deep.
MFR: Paul O Abbe
Stock No.:
54232001Used Pieralisi Jumbo 3 Containerized Mobile Decanter Centrifuge System | 3350 RPM | 350L Viscotherm Pump | 70 BAR | Stainless Construction | Built 2007
Used Pieralisi Jumbo 3 Containerized Mobile Decanter Centrifuge System | 3350 RPM | 350L Viscotherm Pump | 70 BAR | Stainless Construction | Built 2007. Product density 14 Kg/dm3. Includes Viscotherm High Pressure Pump Unit, Type E55-71/71D-EX. 350L tank, rated 70 BAR. Previously used on drilling mud. Serial# J04172.
MFR: Pieralisi
Stock No.:
54232002Used Pieralisi Jumbo 3 Mobile Decanter Centrifuge | Containerized System | 3350 RPM | 350L 70 BAR Viscotherm Pump | Built 2007
Used Pieralisi Jumbo 3 Mobile Decanter Centrifuge | Containerized System | 3350 RPM | 350L 70 BAR Viscotherm Pump | Built 2007 Product density 14 Kg/dm3. Includes Viscotherm High Pressure Pump Unit, Type E55-71/71D-EX. 350L tank, rated 70 BAR. Previously used on drilling mud. Serial# J04171.
MFR: Pieralisi
Stock No.:
54232003Used Pieralisi Jumbo 3 Industrial Decanter Centrifuge | 3350 RPM | Containerized Stainless System with Viscotherm Pump | Built 2007
Used Pieralisi Jumbo 3 Industrial Decanter Centrifuge | 3350 RPM | Containerized Stainless System with Viscotherm Pump | Built 2007. Product density 14 Kg/dm3. Includes Viscotherm High Pressure Pump Unit, Type E55-71/71D-EX. 350L tank, rated 70 BAR. Previously used on drilling mud. Serial# J04385.
MFR: Pieralisi
Stock No.:
54232004Used Pieralisi Jumbo 3 Oilfield Decanter Centrifuge System | Mobile Containerized Unit | 350L 70 BAR Pump | Drilling Mud Service
Used Pieralisi Jumbo 3 Oilfield Decanter Centrifuge System | Mobile Containerized Unit | 350L 70 BAR Pump | Drilling Mud Service. Product density 14 Kg/dm3. Includes Viscotherm High Pressure Pump Unit, Type E55-71/71D-EX. 350L tank, rated 70 BAR. Previously used on drilling mud. Serial# J04444, built 2007.
MFR: Pieralisi
Stock No.:
54232005Used Pieralisi Jumbo 3 Mobile Decanter | Containerized Centrifuge System for Sludge & Wastewater | 3350 RPM | Built 2007
Used Pieralisi Jumbo 3 Mobile Decanter | Containerized Centrifuge System for Sludge & Wastewater | 3350 RPM | Built 2007. Product density 14 Kg/dm3. Includes Viscotherm High Pressure Pump Unit, Type E55-71/71D-EX. 350L tank, rated 70 BAR. Previously used on drilling mud. Serial# J04388.
MFR: Pieralisi
Stock No.:
54188001Used Dorr Oliver 12L Solid Bowl Decanter Centrifuge – Stainless Steel, 5000 RPM, Reconditioned
Used- Dorr Oliver 12L solid bowl Decanter Centrifuge, Stainless steel construction (product contact areas), max bowl speed 5000 rpm, 2.5" double lead conveyor, centripetal pump liquid discharge, base, stainless steel solids discharge chute, bowl cover, 35:1 ratio cyclo gearbox. 15 hp drive motor (460/3/60), vibration switch, belt guard. (Reported to be reconditioned and unused since)
MFR: Dorr Oliver
Stock No.:
54251001Used Peerless A15 Sigma Mixer – 150 lb Capacity, Stainless Steel
Used Peerless Food Machinery Double Arm Sigma Mixer, 150 lbs Capacity, Model A15. Stainless Steel. 5 Cubic Feet. INSIDE DIM: 20" FACE X 20" W X 19" D. Overall 64" FACE X 28" W X 62" H, add 7" W FOR TILT MANDREL. 5 HP, 3/60/220/480 volt. Allen Bradley Micrologics PLC and A/B powerflex 40 drive, HMI. Flex Drice Screen. Mounted on casters. Serial# 87005.
MFR: Peerless