Food and Beverage Equipment

Macon 30" Diameter Single Deck Stainless Steel Screener

Used- Macon Screener, 30" Diameter, 304 Stainless Steel. Single deck, 2 separation. No screen. Top clamp-on cover with 8" center inlet. Driven by a approximate 1/2hp, 3/60/460 volt, 1140 rpm motor. Mounted on a painted carbon steel base.

MFR: Macon

Myers Engineering Single Shaft Disperser

Used-Myers Engineering Single Shaft Disperser, Model 800A-30. 2-1/4" diameter x 46" long 304 stainless steel shaft with a 14" diameter 304 stainless steel saw tooth blade. 360 Degree rotation. Air over oil lift with an approximate 48" rise, overall raised height approx 122''. Manually adjustable speed range. Driven by a 30 hp, 3/60/480 volt, 1760 rpm XP motor. Base mounted. Includes approx 450 gal carbon steel mixing can. Can measures 48" dia x 56" straight side. Distance of mixer blade to ground is 8".

MFR: Myers

Used GEA Niro Mobile Minor Stainless Steel Laboratory Spray Dryer | Pilot-Scale | 1–7 kg/hr | Mobile Unit

Used GEA Niro Mobile Minor Stainless Steel Laboratory Spray Dryer | Pilot-Scale | 17 kg/hr | Mobile Unit. Approximate evaporation rate of 1-7 kg/hr. (2.2-15.4 Lbs./hr.) depending on product. Niro centrifugal air operated atomizer. Approx. 800 mm (31-1/2") diameter x 915 mm (36") straight side. Chamber is lagged and clad. Electric heater, cyclone, pipework and additional infrastructure. Mounted on mobile frame on wheels. Reported in good condition. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Niro

Eirich Model PPB030 Stainless Steel Paddle Blender

Used- Eirich / American Process Paddle Blender, Model PPB030, 30 Cubic Feet Capacity, Stainless Steel. Non-jacketed trough approximately 90" long x 30" wide x 39" deep. Single shaft approximate 4" diameter with (17) paddles, approximate 11.5" x 5" x 5/8" thick. Driven by a 7.5hp (5.5kW), 3/60/230/460 volt, 1755 rpm gear motor, final rpm 61. (2) Piece top hinged cover with 44" x 30" infeed section. End bottom outlet 8" x 8" with slide gate valve. Mounted on (4) legs. Serial# 807495, Built 2016. Last used in shredded cheese application. 3/60/460 Volt.

MFR: American Process Systems

Sweco LS30S 30 Inch Circular Vibratory Screener - Used Stainless Separator

Used Sweco 30" Stainless Steel Double Deck Circular Vibratory Screener, Model LS30S. 30" diameter stainless steel construction, double-deck design providing 3 separations, and a 1/2 HP, 3 phase, 60 Hz, 230/460 volt, 1140 RPM motor. Mounted on a painted carbon steel base with casters for mobility. Serial number 589-74F. Designed for particle separation, grading, classification, sizing, scalping, and fines removal. Possible applications include screening and classifying powders, granules, dry bulk materials, and liquid-solid mixtures.

MFR: Sweco

Used Tolhurst 30” Basket Centrifuge | Top Unload | 0–1000 RPM | Stainless Steel

Used- Tolhurst Basket Centrifuge, Size 30", 0-1000 basket rpm, 70lbs/cu. ft maximum throughput. Stainless steel contact parts. Top Unload, Perforated basket. stainless steel bolt on top with clamp down cover, 6" sight glass. Cover has (2) 2-1/2" threaded inlets. Vessel approximately 30" diameter x 18" straight side. 4" side bottom outlet down to 1-1/4" threaded. 3 point mount on carbon steel frame with casters. Serial# TA-38533. Includes Hydraulic Drive skid, driven by a 7.5hp 3/60/230/460v 1175rpm motor through reducer, and a mounted Control Panel.

MFR: Tolhurst

Used This disperser has two (2) stainless steel shafts that measure 62" and 68" long with a blade diameter of 18". Each shaft is driven by a 60/30 hp, 1780/890 rpm motor that requires 440 vac, 3 ph e...

Used-This disperser has two (2) stainless steel shafts that measure 62" and 68" long with a blade diameter of 18". Each shaft is driven by a 60/30 hp, 1780/890 rpm motor that requires 440 vac, 3 ph electricity. Unit is equipped with an air over oil lift. Rated for hazardous locations.

Used Coaire CAS30S24 30 HP Rotary Screw Air Compressor With Schulz Dryer

Used Coaire Model CAS30S24 oil-injected, fixed-speed rotary screw air compressor, Serial #SS030HG187, with Schulz Model ADS 125 non-cycling refrigerated compressed air dryer, Serial #210009427. The Coaire CAS S-Series is a fixed-speed industrial rotary screw compressor line featuring a high-efficiency motor and cooler with direct or gear drive. The CAS030S is rated at 30 HP, with published S-Series capacities ranging from 127 CFM at 100 psi, 124 CFM at 125 psi, and 111 CFM at 150 psi depending on configuration. Included Schulz ADS 125 refrigerated air dryer has a nominal capacity of 125 SCFM, 1-1/4" NPT-F inlet/outlet connections, 115V/1-phase/60 Hz electrical service, and an 88 lb net weight. The dryer is designed to remove moisture from compressed air before it reaches downstream equipment.

MFR: Coair

Used CMS Heat Transfer 30.3 Sq Ft 304L Stainless Steel Shell and Tube Heat Exchanger, Naphthalene Cooler

Used CMS Heat Transfer Division 30.3 Square Foot 304L Stainless Steel Horizontal Shell And Tube Heat Exchanger With 190 PSI Pressure Rating. Industrial shell and tube heat exchanger designed for liquid-to-liquid heat transfer, process cooling and industrial temperature control applications. Features approximately 30.3 square feet of heat transfer surface area with (12) straight tubes constructed of 304L stainless steel, each measuring 3/4" in diameter. Shell and tubes are constructed of 304L stainless steel and rated for a maximum allowable working pressure of 190 psi and full vacuum at temperatures ranging from -20 F to 400 F. Process connections include (2) 3" shell-side openings, (2) 3" tube-side openings and (4) 3/4" auxiliary nozzles. Originally designed as a naphthalene final cooler, Equipment Tag E-626. Manufactured by CMS Heat Transfer Division, Inc., Bohemia, New York, for Cincinnati Heat Exchangers. Serial #3194.8. National Board #2251. Possible applications include industrial process cooling, naphthalene cooling, chemical processing, liquid-to-liquid heat exchange, solvent cooling, circulating water systems, heat recovery and temperature control of other compatible chemical and industrial process fluids.

Used Trans Food Tech Pre-Mixing System | 300 Gallon Skid-Mounted Mixer

Used Trans Food Tech Pre-Mixing System | 300 Gallon Skid-Mounted Mixer. 41" straight side x 45" diameter tank dimensions, flat bottom. Scrape agitation. Has SPX product pump. With stainless steel electrical control cabinet. Mounted on skid. Built 2018.

MFR: Trans-Tech

Groen Double Motion Inclined Agitation Jacketed Kettle – 300 Gallon, 3 HP Drives (Used)

Used- Groen Double Motion Inclined Agitation Jacketed Kettle 300 Gallon, 3 HP Drives. Vertical, flat open top with covers, Hemispherical bottom. Scrape agitation with "Tree" style secondary mixer. Jacket rated 90 PSI @ 332 Deg.F. Jacket tested good. 3 HP Drives. National Board# 12612, Serial# 75854-2-2. Built 2012

MFR: Groen

Used ROSS CDA-300 Dual Shaft Vacuum Mixer with High Shear Disperser and Sweep Agitator – 300 Gallon Jacketed Mixing System

Used ROSS CDA-300 Dual Shaft Vacuum Mixer with High Shear Disperser and Sweep Agitator 300 Gallon Jacketed Mixing System. 300 Gallon. Unit equipped with Portable Jacketed Tank rated 2 PSI / Full Vacuum @ 300 Deg.F. Jackets rated 50 PSI @ 300 Deg.F.. Approx. 11'1" Overall height. Explosion Proof Motors (XP). (1) 20 HP, 1775 RPM, 208-230/460 volt. (1) 30 HP, 1775 RPM, 208-230/460 volt.

MFR: Ross Industries