Food and Beverage Equipment

Used Pfaudler 26 Sq Ft Tantalum Condenser – Alloy Tubes, CS Shell, 90 PSIG, Type 08-060-BEM-26

Used Pfaudler 26 Sq Ft Tantalum Condenser Alloy Tubes, CS Shell, 90 PSIG, Type 08-060-BEM-26. 8"D x 60"L tubes. Tantalum 2-1/2% Tungsten Alloy Tubes rated 90PSIG/FV@350F. Carbon Steel Shell, 100PSIG/FV@200F. Serial #J064685. National Board #51515. Built 2005.

MFR: Pfaudler

Used Inox AG 1000L Mobile Pressure Tank – 316L Stainless Steel, 28.4 PSI, Horizontal

Used- Inox AG Mobile Pressure Tank, 1000 Liter (264.25 Gallon), 316L Stainless Steel, Horizontal. Approximate 31 diameter x 75 straight side, dished ends. Internal rated 2 kp/cm2 (1.96 bar/28.4 psi) at 200 degrees C. (392 F). Openings top (3) 4, 12-1/2, (2) 1-1/4, 2-1/4 end bottom outlet. Mounted on removable wood saddles with a carbon steel cart with casters. Located in the U.K. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Inox Industries

Shandong HG Machinery 10,000 Liter Fermentation Tank

Unused - Shandong HG Machinery 10,000 Liter Fermentation Tank, 2641 Gallon (85 BBL), 304 Stainless Steel, Vertical. Approximately 78.74" diameter x 137.79" straight side. Dished top, 60 degree cone bottom. Jacket approximately 14m2, test pressure 0.2MPa (29 PSI). Openings top: 102mm (4"), 89mm (3.5"), 51mm (2"), Side: 540mm x 440mm Manhole (21.25" x 17.3"), 38mm (1.5"), 19mm (.75"). 1-1/2" Side cone outlet, 818mm (32.2") discharge height. 1-1/2" Center bottom outlet, approximate 60mm (2.36") discharge height. Mounted on (4) legs. Approximate 87" x 87" x 236" tall, 3400 lb

Used Horizontal 316L Stainless Steel Tate Metalworks Tank, approx. 26,700 gallon capacity

Used- Horizontal 316L Stainless Steel Tate Metalworks Tank, approx. 26,700 gallon capacity. 10 diameter X 44 long straight side; Top Fittings: (2) 30" manways, (1) 1", (1) 2", (2) 3", (3) 4"; Has one bottom end 4" outlet; Dished ends; Ends certified by Trinity Industries; Mounted on saddles; 12-6" shipping height. Previously stored Sulfuric Acid.

Used Leistritz ZSE 27 HP-PH-40D Twin Screw Extruder System – Complete Pharma Line with Chiller & Granulator (2010)

Used Leistritz ZSE 27 HP-PH-40D Twin Screw Extruder System Complete Pharma Line with Chiller & Granulator (2010). Capacity 200 kgs/hr (440 lbs/hr.). Co-Rotating, (2) 27 mm diameter side by side screws, 40:1 L/D ratio, 10-barrel sections, (9) heated barrels, electrically heated water cooled. Hastelloy C-276. Driven by a 22.5HP/15 kw-400-volt 1750rpm AC drive motor via a gear box. Screw speed maximum 500 RPM. Serial# 3899, Built 2010. Includes K-Tron Unit, (3) Temp Control Units, SKA-12-W Chiller, Granulator, Electrical Cabinet, Spare Parts. Weight 1.2 tonnes. Overall dimensions: 3650 mm L x 1150 mm W x 1800 mm H. Previously used in a pharmaceutical application. Our Freight Specialists can assist with any customs documents and forms to insure a smooth transition.

MFR: Leistritz Corporation

Used Leistritz ZSE 27 HP-PH-40D Twin Screw Extruder System – Pharma Grade with K-Tron Feeders & Full Package

Used Leistritz ZSE 27 HP-PH-40D Twin Screw Extruder System Pharma Grade with K-Tron Feeders & Full Package. Capacity 200 kgs/hr (440 lbs/hr.). Co-Rotating, (2) 27 mm diameter side by side screws, 40:1 L/D ratio, 10-barrel sections, (9) heated barrels, electrically heated water cooled. Hastelloy C-276. Driven by a 22.5HP/15 kw-400-volt AC drive motor via a gear box. Screw speed maximum 500 RPM. Serial# 3778, Built 2008. Includes (2) K-Tron feeders, Control Cabinet, (3) Temp Control Units, Barrel Lift, Spare Parts. Weight 1.2 tonnes. Overall dimensions: 3650 mm L x 1150 mm W x 1800 mm H. Previously used in a pharmaceutical application. Our Freight Specialists can assist with any customs documents and forms to insure a smooth transition.

MFR: Leistritz Corporation

Used Leistritz ZSE 27 HP-PH-40D Twin Screw Extruder – Pharmaceutical Grade 27mm Co-Rotating Extruder System

Used Leistritz ZSE 27 HP-PH-40D Twin Screw Extruder Pharmaceutical Grade 27mm Co-Rotating Extruder System. Capacity 200 kgs/hr (440 lbs/hr.). Co-Rotating, (2) 27 mm diameter side by side screws, 40:1 L/D ratio, 10-barrel sections, (9) heated barrels, electrically heated water cooled. Hastelloy C-276. Driven by a 22.5HP/15 kw-400-volt 1750rpm AC drive motor via a gear box. Screw speed maximum 500 RPM. Serial# 3659, Built 2007. Weight 1.2 tonnes. Overall dimensions: 3650 mm L x 1150 mm W x 1800 mm H. Includes Control Cabinet, (3) Temp Control Units, Barrel Lift. Previously used in a pharmaceutical application. Our Freight Specialists can assist with any customs documents and forms to insure a smooth transition.

MFR: Leistritz Corporation

Used Leistritz ZSE 27 MAXX/48D Twin Screw Extruder System with Feeders and Vacuum Package

Used Leistritz ZSE 27 MAXX/48D Twin Screw Extruder System with Feeders and Vacuum Package. (2) 1.05" (27 mm) diameter screws. 48:1 L/D Ratio. Co-rotating. 12-barrel housing section electrically heated, water cooled. (2) Degassing port. Maximum screw speed 1200 RPM. Via a gearbox, Incl. (2) Leistriz Twin Screw side feeders, (1) Brabender feeding system, (1) Bush vacuum pump, type Mink MM 1144BC, (1) Temperature control, (1) Control panel. Previously used in a plastic lab. Overall dimensions: 3300 mm L x 1000 mm W x 2200 mm H, Weight 1 tonnes (extruder only).

MFR: Leistritz Corporation

High-Capacity Stainless Steel Jacketed Tank – Used. Made by Precision Stainless

High-Capacity Stainless Steel Jacketed Tank Used. Made by Precision Stainless. 103 Liter / 27.2 Gallon Capacity, 316L Stainless Steel, Vertical. Approximate 20" diameter x 26" straight side. Dished removable top head, dished bottom head. 304L Stainless steel dimple jacket, rated 100psi / FV at -20 to 250 degrees F. Internal rated 45psi / FV at -20 to 250 degrees F. Openings: (5) 3", (1) 1-1/2". (2) 1", 1-1/2" Center bottom outlet with approximately 8-10" discharge height. (4) internal baffles. Mounted on (4) legs with casters. Serial# 5644-6, National Board# 3890. Used as Freeze / Thaw Vessel.

Precision Stainless Freeze/Thaw Vessel – 103 Liter, Used.

Precision Stainless Freeze/Thaw Vessel 103 Liter, Used. 103 Liter / 27.2 Gallon Capacity, 316L Stainless Steel, Vertical. Approximate 20" diameter x 26" straight side. Dished removable top head, dished bottom head. 304L Stainless steel dimple jacket, rated 100psi / FV at -20 to 250 degrees F. Internal rated 45psi / FV at -20 to 250 degrees F. Openings: (5) 3", (1) 1-1/2". (2) 1", 1-1/2" Center bottom outlet with approximately 8-10" discharge height. (4) internal baffles. Mounted on (4) legs with casters. Serial# 201512-20, National Board# 8937. Used as Freeze / Thaw Vessel.

Used Precision Stainless 20” Diameter Jacketed Stainless Steel Tank

Used Precision Stainless 20" Diameter Jacketed Stainless Steel Tank. 103 Liter / 27.2 Gallon Capacity, 316L Stainless Steel, Vertical. Approximate 20" diameter x 26" straight side. Dished removable top head, dished bottom head. 304L Stainless steel dimple jacket, rated 100psi / FV at -20 to 250 degrees F. Internal rated 45psi / FV at -20 to 250 degrees F. Openings: (5) 3", (1) 1-1/2". (2) 1", 1-1/2" Center bottom outlet with approximately 8-10" discharge height. (4) internal baffles. Mounted on (4) legs with casters. Serial# 7696-1, National Board# 1731. Used as Freeze / Thaw Vessel.

Used Industrial Precision Stainless Tank, Board Rated.

Used Industrial Precision Stainless Tank, Board Rated. 103 Liter / 27.2 Gallon Capacity, 316L Stainless Steel, Vertical. Approximate 20" diameter x 26" straight side. Dished removable top head, dished bottom head. 304L Stainless steel dimple jacket, rated 100psi / FV at -20 to 250 degrees F. Internal rated 45psi / FV at -20 to 250 degrees F. Openings: (5) 3", (1) 1-1/2". (2) 1", 1-1/2" Center bottom outlet with approximately 8-10" discharge height. (4) internal baffles. Mounted on (4) legs with casters. Serial# 200254-27, National Board# 8628. Used as Freeze / Thaw Vessel.