Food and Beverage Equipment

Used Eurotecno 1200mm Heavy-Duty Granulator | 600mm Rotor | 12 Rotor Knives | 132 kW Motor | Plastics Recycling

Used Eurotecno 1200mm Heavy-Duty Granulator | 600mm Rotor | 12 Rotor Knives | 132 kW Motor | Plastics Recycling. 23.3" (600 mm) dia x 39" (1200 mm) st. side rotor. 12 rotor knives, 8 stator/bed knives. Belt driven by a 132 KW (177hp) motor. Complete with hopper and conveyer belt. Previously used in a plastic application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Eurotechno

Used FL Smidth 1860 Solid Bowl Decanter Centrifuge, Stainless steel

Used FL Smidth Incorporated Solid Bowl Decanter Centrifuge, Type NSOSTT12071, Model 1860-460-75, in stainless steel construction. Mid-size, high-throughput unit with 2,500 rpm maximum bowl speed and up to 60 gpm feed rate. Suitable for continuous liquid/solid separation in industrial slurries at up to approx. 60 gpm feed, such as food, chemical, mining/mineral, and wastewater streams, where stainless construction and mid-range throughput are required (subject to buyer validation). Includes feed pipe, 71:1 ratio gearbox, and 75 hp 3/60/460 volt, 1,765 rpm motor. Serial # 7959-2. Stainless construction broadens product compatibility, and the 75 hp drive delivers meaningful throughput and solids-handling capacity. Reported in good working condition; photos and inspection recommended. Broadly used in coal, iron ore, copper, gold, cement, coal preparation and potash and fertilizer minerals.

MFR: F L Smith

Used - Paul O Abbe Ball Mill / Pebble Mill, Carbon Steel, 26 Gallon

Used- Paul O Abbe Ball Mill / Pebble Mill, Carbon Steel. Approximate 26 Gallon Total Volume. Jacket chamber approximate 18" diameter x 24-1/2" long. Driven by a 3hp, 3/220/440 volt motor. Rotary unions. Manhole cover. Mounted on a painted carbon steel frame.

Doyle and Roth Vacuum Cooler Condenser

Used- Doyle and Roth Vertical Shell and Tube Condenser, Approximate 18 Square Feet. Carbon steel shell rated 150psi / FV external at -20 to 300 degrees F. (50) 3/4" diameter x 24" long 316L Stainless Steel tubes rated 15 psi / FV at -20 to 350 degrees F. Baffle spacing 3.5". Single pass. Side lug mounted. National Board# 20757, Serial# S1998.

MFR: Doyle & Roth

Used Leistritz ZSE 18 PH-40D Twin Screw Extruder System – Pharma Lab Scale Line with K-Tron Feeder & Pelletizer

Used Leistritz ZSE 18 PH-40D Twin Screw Extruder System Pharma Lab Scale Line with K-Tron Feeder & Pelletizer. (2) Co-Rotating 18 mm diameter side by side screws, 40:1 L/D ratio, 8 total barrel sections, (7) heated barrels, electrically heated water cooled. Driven by a 4.7 kw (6.3hp) -400/230-volt AC drive motor via a gear box. Screw speed maximum 600 RPM. On wheels. Serial# 03396, Built 2005. Includes Product Loader, K-Tron Dosing Station, String Die, Pelletizer, (3) Temp Controllers, Spare Parts. Weight 7.4 tonnes. Previously used in a pharmaceutical application. Our Freight Specialists can assist with any customs documents and forms to insure a smooth transition.

MFR: Leistritz Corporation

Used American Process Systems Ribbon Blender – Model DRB 18 (18 Cu Ft / 135 Gall

Used American Process Systems Ribbon Blender, Model DRB 18. 18 Cubic foot / 135 gallon Capacity. Approximately 60" long x 24" wide x 28" deep trough with hinged top cover. 2" Diameter shaft with welded ribbons. Outer ribbon is 1-1/2" wide x 7/16" thick, inner ribbon 2" wide x 3/16" thick. 6" Center bottom outlet with gate valve, 25" discharge height. Driven by a 5hp, 3/60/230/460 volt, 1758 rpm motor through reducer 10.15:1 ratio. Control panel with AB Powerflex 525 Drive. Mounted on (4) Carbon Steel legs. Serial# 1163

MFR: American Process Systems

Used 18,000 Gallon Reco Industries Vertical Stainless Steel Tank – Insulated Bulk Storage Vessel

Used 18,000 Gallon Reco Industries Vertical Stainless Steel Tank Insulated Bulk Storage Vessel. SA36 Stainless steel. Approximately 11' 6'' diameter x 24' tall. Insulated. Vertical.

MFR: Reco

Used Lundberg Carbon Steel Vertical Tank, Approx. 18,000 gallon capacity

Used- Lundberg Carbon Steel Vertical Tank, Approx. 18,000 gallon capacity. Slight cone top, flat bottom; 12 diameter X 22 high straight side; Multiple top fittings and side bottom outlets; 24" side bottom manway. Insulated and covered with sheathing. Includes ladder with safety cage. Built 2017. Previously stored 50% caustic.

Doyle & Roth 1,824 Sq Ft. Heat Exchanger

Used- Doyle & Roth Shell & Tube Heat Exchanger, 1,824 Square Feet. (929) 304 stainless steel .75" diameter x 10' long Tubes rated 86 psi/ FV at 400 degrees F. Carbon steel Shell rated 150 psi at 150 degrees F. National Board# 15755, Serial# J-6759-4, Built 1992.

MFR: Doyle & Roth

Used 1850 Gallon Waukesha Cherry-Burrell Stainless Steel Tank with Tri-Clamp Discharge

Used- 1850 Gallon Waukesha Cherry Burrell 316 Stainless Steel Tank. Interior Dimensions: 80" x 74" straight side. Center discharge: 4" tri-clamp. Side ports: 2" and 1/5". Top manway lid. Distance from discharge to floor is 42". (4) adjustable stainless steel legs with pads. Serial# H-486-95. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Waukesha

Used Anhydro Vertical Falling Film Reboiler – 19.5 Sq Ft, Hastelloy Tubes

Used- Anhydro Vertical Falling Film Reboiler / Heat Exchanger, Approximate 19.5 Square Feet. Carbon steel shell rated 200psi / FV at -20 to 400 degrees F. (19) 1" diameter x 47" long Hastelloy C-276 tubes rated 15 psi internal / 200 psi external at -20 to 400 degrees F. Openings: (2) 2", (2) 1". 40,000 BTU/h. Side lug mounted. Certified by Orbit Industries, National Board# 1026, Serial# 8306-PV-3. No bottom head.

MFR: Anhydro

Steam Heated Falling Film Reboiler

Used- Anhydro Vertical Falling Film Reboiler / Heat Exchanger, Approximate 19.5 Square Feet. Carbon steel shell rated 200psi / FV at -20 to 400 degrees F. (19) 1" diameter x 47" long Hastelloy C-276 tubes rated 15 psi internal / 200 psi external at -20 to 400 degrees F. Openings: (2) 2", (2) 1". 40,000 BTU/h. Side lug mounted. Certified by Orbit Industries, National Board# 1027, Serial# 8306-PV-4. No bottom head.

MFR: Anhydro