Food and Beverage Equipment
Stock No.:
73388001Used Ishida IX-GA-65100 X-Ray Inspection System – FDA Approved, Built for Food Applications
Used- Ishida IX-GA-65100 (X-Ray Inspection system. Capable of speeds from 5 - 30 meters per minute. Has a maximum conveying product weight" 25kg (over entire conveyor). Cooling method: Hermetical air cooling. FDA approved urethane belting conveyor. Operating temperature: 0 deg C - 40 deg C (with no freezing or rapid temperature shifts). Operation humidity: 30 - 85% RH (with no condensation). Xray out put: Max 350W. Inspection chamber: 7- - 1000mm (length) up to 650mm (width) up to 270mm (height). Last used in food operation. 230 volt single phase.12.0 AMP
MFR: Ishida
Stock No.:
73584002Ishida CCW-RZ-212P-D705-WP Multihead Weigh Scale System
Used- Ishida Model CCW-RZ-212P-D705-WP 12 Head Double Drop Dimpled/Embossed bucket combination scale, bucket elevator. 12 head split into 24 total buckets, stainless steel, combination, weigh scale system. Rated from 20 to 80 weighs per minute per side ( depending on materials and application). Has a weight capacity: 4 to 500 grams with accuracies of +/- 1 gram, maximum volume of 800cc (per single dump). Equipped with double-beam strain gauge load cell, radial feed trough, (12) 5" long x 4" wide x 5" deep stainless steel dimpled feed buckets and 6" long x 3-1/2" wide x 4" deep dimpled stainless steel weigh buckets (2 for each feed bucket) and 3 sets per each product stainless steel dimpled discharge chutes. Frazier & Son Model C 4" x 8" bucket elevator with vibratory feeder. Includes Mezzanine
MFR: Ishida
Stock No.:
73630001Unused Ishida DACS-G-S015 Checkweigher – Conveyor Mounted Automatic Weighing System
Unused Ishida Conveyor Mounted Checkweigher, Model DACS-G-S015. Weight range approximately 600 g (0.05g) to 6000 g (0.1g). 9-1/2" Wide x 13-1/2" long infeed conveyor, 9-1/2" wide x 9-1/2" long weigh station. 9-1/2" wide x 21-1/2" long discharge conveyor. Mechanical arm reject. Ishida DACS digital automatic checking System, Panasonic HMI. 1/60/120-240 Volt. Serial# 100212015. Built 2016. Overall dimensions 46" x 39" x 56"T.
MFR: Ishida
Stock No.:
73630002Ishida DACS-G-S015 Inline Checkweigher – High Accuracy Conveyor Scale
Unused Ishida Model DACS Conveyor Mounted Checkweigher, Model DACS-G-S015-12/CR-I-S. Weight range approximately 600 g (0.05g) to 1500 g (0.1g). Infeed belt 6-1/4" wide x 14-1/2" long & 13-1/2" long x 6-1/4" wide. Weigh station 6-1/4" x 10" long. Discharge belt 6-1/4" wide x 18" long. Mechanical arm reject. Panasonic HMI. 3/60/240 Volt. Serial# 100212007. Built 2016. Overall dimensions 57" X 38" X 56"T.
MFR: Ishida
Stock No.:
73630003Buy Used Ishida Conveyor Checkweigher Model DACS-G-S015 – Precision Weight Control
Unused Ishida Conveyor Mounted Model DACS-GN Checkweigher. Weight range approximately 600 g (0.05g) to 1500 g (0.1g). Infeed belt 8-3/4" wide x 14" long. Middle belt 8-3/4" x 14" long. Discharge belt 9-1/2" wide x 18" long. Air knife discharge. Ishida DACS digital automatic checking System HMI. 1/60/120-240 Volt.
MFR: Ishida
Stock No.:
73630004Used Ishida DACS-G-S015 Inline Checkweigher with Air Knife Reject System
Unused Conveyor Mounted Ishida Checkweigher, Model DACS-GN. Weight range approximately 600 g (0.05g) to 1500 g (0.1g). Infeed belt 8-3/4" wide x 14" long. Middle belt 8-3/4" x 14" long. Discharge belt 9-1/2" wide x 18" long. Air knife discharge. Ishida DACS digital automatic checking System HMI. 1/60/120-240 Volt.
MFR: Ishida
Stock No.:
73630005Ishida Conveyor Checkweigher DACS-G-S015 – Automatic Weight Inspection Unit
Unused- Conveyor Mounted Ishida Model DACS-GN Checkweigher. Weight range approximately 600 g (0.05g) to 1500 g (0.1g). Infeed belt 8-3/4" wide x 14" long. Middle belt 8-3/4" x 14" long. Discharge belt 9-1/2" wide x 18" long. Air knife discharge. Ishida DACS digital automatic checking System HMI. 1/60/120-240 Volt.
MFR: Ishida
Stock No.:
73630006Unused Ishida Automatic Checkweigher System with Digital HMI Controls
Unused-Ishida "DACS" Conveyor Mounted Checkweigher, Model DACS-GN. Weight range approximately 600 g (0.05g) to 1500 g (0.1g). Infeed belt 8-3/4" wide x 14" long. Middle belt 8-3/4" x 14" long. Discharge belt 9-1/2" wide x 18" long. Air knife discharge. Ishida DACS digital automatic checking System HMI. 1/60/120-240 Volt.
MFR: Ishida
Stock No.:
73695001Used IWK TFS30-2 Automatic Dual Head Hot Air Plastic Tube Filler – High-Speed Tube Filling & Sealing Machine
Used IWK (IWKA) Model TFS30-2 Automatic Dual Head Hot Air Plastic Tube Filler High-Speed Tube Filling & Sealing Machine. Capable of speeds up to 180 tubes per minute (depending on tube size and application). Includes model TZ-201 Automatic tube loader, tube trimmer, print registration, jacketed and agitated hopper. Complete with onboard controls and color touchscreen operator HMI. 3/60/408V.
MFR: IWKA
Stock No.:
54572001Unused JBT Alco PRO/ECO Continuous Spiral Freezer – 600 mm Belt Width Food Processing Spiral Freezer
Unused- JBT Alco Continuous Spiral Freezer, PRO/ECO Series. Food-grade stainless steel construction. 600mm (24") belt width. Approximate 475' total belt length. 358 kW @ 22 degrees F; 284 kW @ -40 degrees F cooling capacity. Carbon dioxide (R-744) refrigerant. Self-cleaning type. Direct drive stainless steel conveyor belt. Automatic belt tension and belt folding control. Includes condensers and compressor. Equipped with Siemens PLC controls. Suitable for use with ammonia (NH3), carbon dioxide (CO2), Freon refrigerants, ice water, or brine systems. 575V. Built 2021. Designed for use in a food application.
MFR: JBT Foodtech
Stock No.:
53332001Johnson Model CJ-9200 Industrial Dual Chamber Cheese Shredder. Capable of up to 10,000 lbs per hour Dual containment chambers. Upgraded safety package in 2021 from Tetra Pak.
Used- Johnson Model CJ-9200 Industrial Dual Chamber Cheese Shredder. Capable of up to 10,000 lbs per hour (depending on application). Dual containment chambers: 24" x 8" x 12" each. 33" Shred wheel. Control panel with Allen Bradley PanelView Plus HMI, A/B Powerflex 753, A/B Compact GuardLogix 5380 PLC. Upgraded safety package in 2021 from Tetra Pak.
MFR: Johnson
Stock No.:
72162003Used Jones CMV5 Semi-Automatic Continuous Motion Vertical Tuck Cartoner – Pharmaceutical Cartoning System
Used Jones CMV5 Semi-Automatic Continuous Motion Vertical Tuck Cartoner Pharmaceutical Cartoning System. Capable of speeds up to 120 cpm. Has 5" centers for a carton size range: length 1" - 4-1/4", width 3/4" - 4-1/4", depth/height 2-1/2" - 8". Standard frame set up on tuck style cartons. Last used in pharmaceutical solid dose packaging operation. Has drive for bottom embossed date coder. Laetus Argus 4 Bar Code Scanner. Mounted on casters.
MFR: Jones
