Food and Beverage Equipment
Stock No.:
53835001Used Alfa Laval Solid Bowl Decanter Centrifuge – Model Foodec-209
Used- Alfa Laval Solid Bowl Decanter Centrifuge, Model Foodec-209, 316 stainless steel construction (product contact areas). Maximum bowl speed 4400 rpm. Maximum G force 3030. Single lead conveyor, 360 degree solids discharge ports with wear inserts, base, casing with CIP spray header, Approx. 15 kW (20hp)main drive motor, feed pipe, safety guards, gearbox. On 4 legs. Includes: Stainless steel control panel. Serial# 5120827-2006, built 2006. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Alfa Laval
Stock No.:
53844016Industrial Water Temperature Controller – Delta T ESW-09C 9KW
Used Delta T Systems Model ESW-09C Water Temperature Control Unit. 9 KW Heating capacity. 3/4 HP Pump. Approximate temperature range 32F to 230F (0C to 110C). Mounted on casters for mobility. Serial# 202167-1-1-1. 3/60/208 Volt, 35.5 Amp.
Stock No.:
53844018AGI 18.5" Wide Mobile Inclined Conveyor – Stainless Steel Frame
Used- AGI Industrial Mobile Inclined Cleated Conveyor System. Approximate 18-1/2" wide x 6 ft long, cleated belt. Cleat 8" x 2" tall. Driven by .5hp, 3/60/460 volt, 1730/58 rpm gear motor. Control panel with Allen Bradley powerflex 525 drive. Adjustable height. Mounted on stainless steel frame with casters. Serial# 2395-01. 3/60/460 Volt. Built 2022.
Stock No.:
53864003Used Glatt CPCG 5 Fluid Bed Dryer – Stainless Steel – Spray Granulation – Steam Heated – 5.5 kW Blower – 1996
Used- Glatt Fluid Bed Dryer Model CPCG 5. Stainless steel construction with spray granulation and drying inserts, 2 bar shock rating, 5.5 kw blower, 460 volt, steam heated with control panel, serial 6345. Built 1996.
MFR: Glatt
Stock No.:
53877002Used Extru-Tech E-325 Single Screw Extruder – 150-800 Lbs/Hr
Used- Extru-Tech Model E-325, Single Screw Extruder. Unit designed primarily for research and development purposes. 3.25", Approximately 40 HP motor, Can process between 150 to 800 pounds per hour (68 to 363 kilograms per hour). The E-325 is equipped with a 6x30 single-shaft conditioner, an accurate feed system, a knife drive, and a control panel with a variable frequency drive (VFD) panel operating at 230 volts.
MFR: Extrutech
Stock No.:
53904004Unused 2024 3,000 Liter Hastelloy C22 Agitated Nutsche Filter Dryer
Unused 2024 Sachin Industries 3,000 Liter 316 Stainless Steel / Hastelloy C-22 Clad Agitated Nutsche Filter Dryer (ANFD), GMP Design. Vertical batch-type agitated Nutsche filter dryer featuring 3,000-liter capacity, 316 stainless steel construction with Hastelloy C-22 (HC22) cladding, detachable bottom assembly, and provisions for HC22 filter mesh media or polypropylene (PP) filter cloth. Designed for integrated solid-liquid separation, cake washing, agitation, and vacuum drying within a single enclosed vessel. Equipped with a top-mounted motorized agitator assembly, hydraulic plug-type discharge valve, multiple process connections, and stainless steel support structure. Includes single-bag 316 stainless steel dust collector for capturing fines during the drying cycle and a 120 cubic meter per hour water ring vacuum pump with HC22 product-contact components, 7.5 HP motor, 1,440 RPM, 4-pole, 60 Hz, specified for US NEC Class I, Division 2 applications. Also includes a mother liquor priming pump with HC22 contact components, 5 HP motor, 1,440 RPM, 4-pole, 60 Hz, and Class I, Division 2 specifications. Additional components include miscellaneous HC22 and 316 stainless steel piping, valves, fittings, and instrumentation. Manufacturer engineering drawings available. Suitable for potential applications involving pharmaceutical intermediates, active pharmaceutical ingredients (APIs), specialty chemicals, fine chemicals, solvent-containing solids, and other processes requiring contained filtration, washing, and vacuum drying.
Stock No.:
53904005Unused 5,000 Liter Hastelloy C22 Clad Rotary Vacuum Paddle Dryer System – 2024
Unused 2024 Sachin Industries 5,000 Liter 316 Stainless Steel / Hastelloy C-22 Clad Horizontal Reactor System With Heated Agitator, Condenser, And Receiver. Heavy-duty horizontal process reactor featuring 316 stainless steel construction with Hastelloy C-22 (HC22) cladding and a motor-driven internal shaft and drum assembly. Equipped with an externally mounted electric motor, belt drive, gear reducer, and specially designed rotary pressure joint for heating the hollow agitator drum and paddles. Includes actuated anti-cavity V-notch discharge valve with HC22 product-contact components, actuated V-notch charging valve with HC22 contact components, and a top-mounted charging hopper fabricated from 3 mm thick HC22. Features a multi-bag dust collector with HC22-supported filter cages, five HC22 filter cartridges, vacuum connection for moisture and solvent vapor extraction, and jacketed dust collector housing to minimize condensation during drying operations. Includes two sets of sight glasses and light glasses for visual process monitoring. Supplied with a 10 square meter vertical glass-lined shell-in-shell condenser with mild steel construction, insulation, and external cladding, along with a 1,000-liter vertical glass-lined receiver equipped with level indicators, provisions for pressure and vacuum transmitters, bottom discharge valves, insulation, and cladding. Internal and external stainless steel surfaces specified as acid cleaned, with external unmachined mild steel surfaces finished with two coats of red oxide primer. Manufacturer engineering drawings available. Originally specified with installation qualification (IQ), operational qualification (OQ), and performance qualification (PQ) services at the client's site. Suitable for potential applications involving chemical processing, solvent recovery, vacuum drying, and specialty chemical production.
Stock No.:
53909001Used GEA XStream Lab Homogenizer 2000 – 200 MPa, 9 L/H, NiSoX-Valve, 2022
Used- GEA XStream Lab Homogenizer 2000. 9 liters/hour maximum flow rate; 200 MPa maximum pressure; PLC and HMI touchscreen 7; NiSoX-Valve; XStream is the ideal homogenizer to carry out tests in laboratory and be prepared to scale up to the industrial production thanks to the consistent results that NiSoX-Valve provides for many and different applications. 3/60/220-240V; Serial # 17300; New in 2022. Last used to produce hemp cannabinoid emulsions.
MFR: GEA Process Engineering
Stock No.:
53913001Used Olson / V-RAM Double By-Products Pumping System | 5,000 lbs/hr | Dual 50 HP Hydraul
Used Olson Mfg. Co. dba V-RAM Pumps Double By-Products Pumping System. (2) Identical Stainless Steel Pumps, approximately 5000 lbs/hr working capacity, with 679 max psi per each pump. 30-1/2" long x 14" wide x 15-1/2" deep infeed. Approximately 54" long trough with 11" ram head. 6" diameter outlet with gate valve, 10" discharge height. Includes Double B-Style Hydraulic Unit skid with air cooler. (2) 50hp 3/60/230/460v 1775rpm motors. Includes Control Panel.
Stock No.:
53928001Valmet Pre-Compression Plug Feeder & Shredder System – 1000 BDST/D Biomass Capacity
Unused Valmet Plug Screw Feeder with Pre-Compression Screw and Shredder. Designed for infeed raw material chips density 100 kg/m3, moisture content 20-48%, design flow rate 530 dry tons per day soft wood chips, (500BDST/D); Max capacity 1000 BDST/D; Turndown rate 50%. Valmet plug screw feeder: Fed by a pre-compression screw section, and 48" shredder at outlet; 850 HP Siemens motor 1750 rpm 460v 3/60; Gear Reducer ratio 25:1. Nominal speed 69 rpm, range 35-105 rpm; Inlet 35.83" x 25.79". Pre-compression screw: Materials of construction stainless steel 304L for all contact parts; Sits on top of plug screw at 90 degrees with s 24" diameter top force feed; Capacity Volume/Revolution inlet/discharge: 45 L / 22.5 L. Capacity / revolution at 110 kg/m3 = 5.46 BDST/D and net max capacity at 110 kg/m3 = 530 BDST/D; 250 HP motor 1750 rpm 460v 3/60 v-belt drive to gear reducer V-belt reduction 1:52; Gear reducer SEW Eurodrive ratio 18:1. Final rpm nominal speed 65 rpm, range 45-97 rpm; Outlet: 35.83" x 25.79". T-Pipe 48" Shredder: Fed from plug screw feeder 24" biomass inlet; MAWP 350 psig at 800F; 100 HP motor 1750 rpm 460v 3/60; Gear reducer 8.9:1 for nominal 197 rpm; Outlet 24" flange 600#. All equipment never used, new in 2020. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
