Cosmetics Equipment
Stock No.:
54699001Used Littleford KM-3000-D 74 Cu Ft 304 Stainless Steel Jacketed Plow Mixer
Used Littleford Plow Mixer, Model KM-3000-D, 304 Stainless Steel, Approximate 74 Cubic Feet Working Capacity. Approximate 44" diameter x 116" long chamber. Drum rated Atmospheric, 304 stainless steel jacket rated 75 psi at 32 to 320 degrees F. Approximate 5" diameter shaft with (12) welded on paddles. Driven by a 100 Hp 3/60/460/1780 rpm motor thru Falk gearbox, 13.86 to 1 ratio. Provision for (10) Tulip style choppers each should be driven by a 15 HP motor (5) additional provision. Top openings: 1-1/2", 3", 10", 16". (2) 24" x 16" side access doors. 16" Side bottom outlet. Serial# 41961-4442, Built 1993. Possible applications include high-intensity powder blending, dry ingredient mixing, granulation, particle dispersion and processing of compatible specialty chemicals, mineral powders, fertilizers, construction materials, polymer additives, pigments, detergents and other suitable bulk solid formulations.
MFR: Littleford
Stock No.:
50467028PulsaFeeder 7440-S-AE Metering Pump – 5 HP, 230/460V, XP Motor
Used- PulsaFeeder Diaphragm Metering Pump, Model 7440-S-AE, series 40, nominally rated 8.55 gph at 330 psi, with 5 hp, 230/460 volt XP motor, Serial # 9560471-2.
Stock No.:
10151561Used J.H. Day Stainless Steel Jacketed Mixtruder | 75 Gallon Working Capacity | 30+25 HP Hydraulics
Used J.H. Day Stainless Steel Jacketed Mixtruder | 75 Gallon Working Capacity | 30+25 HP Hydraulics. With dispersion blades and extruder screw discharge. Internal pressure: Atmospheric @ 353F shell is 7/16" thick. Jacket pressure: 125 psi @ 353F jacket is 3/8" thick. Mixer Dimensions: 32" x 32" x 25" high, approximate total capacity is 110 gallons. Extruder screw is 8" diameter driven by a hydraulic motor, and hydraulic tilt discharge are both powered by 30 HP 230/460 volts Vickers Hydraulic pumping system. Mixer Blades driven by a 25 hp US. varidrive motor, 220/440 volt. 31 to 125 RPM to chain and sprocket to give you approximately 15 to 62.5 RPM output speed on the blades. NB #1117, SN 86065. Built 1971.
MFR: J H Day
Stock No.:
52720010Used Lee 75-Gallon Tilt-Back Dual Motion Agitator – 316 SS, XP Motor, Industrial Mixer
Used- Lee Floor Mounted 75 Gallon Dual Motion Tilt Back Agitator Assembly, Model 9M, 316 Stainless Steel. Approximate 30" wide anchor style agitator. Inner bars 11" x 1.5" wide x 5/16" thick. Outer bars 11.5" x 1.5" x 5/16" thick. Driven by a 2hp, 3/60/230/460 volt, 1725 rpm XP motor, thru dodge gearbox. Has tilt mounted stainless steel frame. Serial# 17378-2.
MFR: Lee Ind
Stock No.:
53183003Unused Komarek DH-300 Heavy-Duty Briquetting Press – 2–10 Tons/Hr, 75-Ton Roll Force, 75 HP
Unused Komarek Heavy-Duty Two-Roll Briquetting Press, Model DH-300. 75 tons of roll separating force. Rated throughput of 2-10 tons/hour depending on briquette size and density. Roll dimensions: 13'' - 20.5'' diameter x 4'' - 13'' width. Driven by a 75 HP motor. Gravity fed. Possible applications include briquetting and compacting operations for carbon based fuels, inorganic chemicals, mineral ores, industrial by-products, and metal powders. Serial# 051740-1-1, built 2022.
MFR: Komarek Greaves
Stock No.:
53189002Used Eirich RV-15 Mixer – 750L, 1200 kg Capacity, 75 HP Tool, 304 Stainless, Industrial Intensive Mixer
Used- Eirich Mixer, Model RV-15. 304 stainless steel product contact surfaces. Approximately 750 liter bowl. 1200 kg max capacity. 75 hp mixing tool. 10 hp pan motor. On board lubrication system with 2 hp pump. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Eirich
Stock No.:
53385002Amherst 75 Gallon Agitated Stainless Steel Pressure Tank
Used- Amherst Stainless Steel Pressure Tank, Approximately 75 Gallon, 304L Stainless Steel, Vertical. Approximate 30" diameter x 22" straight side. Dished top and bottom heads. Internal rated 130 psi at -20 to 150 degrees F. Top entering 3-blade prop agitator, driven by 0.5HP, 3/60/230/460 volt, 1725 rpm gear motor, 5 to 1 ratio. Openings top: 8" handhole with cover, (2) 2", 1/2". Center bottom outlet with manual ball valve. (1) 500 PSI Basket Strainer and Bag Filter. Control panel. Mounted on (4) legs with casters. National Board# 1472, Serial# 1707, Built 2021. Previously used for raw materials used in the production of molded fiber products.
Stock No.:
53385004Amherst 304L Stainless Steel 75 Gallon Vertical Pressure Tank
Used- Amherst 304L Stainless Steel Pressure Tank, Approximately 75 Gallon, Vertical. Approximate 30" diameter x 22" straight side. Dished top and bottom heads. Internal rated 130 psi at -20 to 150 degrees F. Top entering 3-blade prop agitator, driven by 0.5 HP, 3/60/230/460 volt, 1725 rpm gear motor, 5 to 1 ratio. Openings top: 8" handhole with cover, 3", (2) 2", 1". 3" Center bottom outlet with manual valve. Mounted on (4) legs with casters. National Board# 1379, Serial# 1601, Built 2020. Previously used for raw materials used in the production of molded fiber products.
Stock No.:
53690001Used Belshaw Adamatic OVEN 2020 Double Rack Oven – 275,000 BTU/hr | Natural Gas/Propane | 2 B-Style Racks | 2019
Used- Belshaw Adamatic Double Rack Oven, Model OVEN 2020. Natural gas or propane with automatic electric switch over; 275,000 btu/hr; Stainless steel construction; Heavy duty rack lift, accepts A, B, or C-styles, 46" long B-style lift, with spare lift for (2) B-style single racks; 39" wide x 75" tall door; 10" diameter exhaust, with 10" to 12" diameter adapter; Dayton 12" diameter exhaust fan; Oven is 72" wide x 62" long plus 30" long exhaust hood; Stainless steel floor insert; Natural Gas or Propane (Electronic automatic switch over). 3/60/208/240V New in May 2019.
MFR: Belshaw
Stock No.:
54001001Unused Machine & Process Design RigiMill 2436 Hammermill – 75 HP, USDA/3A Sanitary, 24,000 lbs/hr, 2025
Unused Machine & Process Design RigiMill Model 2436 sanitary fixed-blade hammermill with 304 stainless steel construction. Features approximately 24" diameter x 36" long rotor driven by a 75 HP, 3600 RPM motor. Rated for approximately 24,000 lbs/hr throughput on lactose and whey, with 98% of product passing through 40 mesh based on manufacturer testing. Equipped with approximately 36" x 10.75" bolted-flange inlet throat and discharge-area screen with 0.76" diameter perforations. Includes bearing temperature and vibration sensors. Overall dimensions approximately 98" long x 57" wide x 42" high. Designed to meet FSMA, GMA and 3-A/Dairy standards and USDA approved. Mill was tested only and has never been used. Built 2025.
MFR: Machine & Process Design
