Cosmetics Equipment

In STOCK AND New- Paul O. Abbe, Model RB-375 Ribbon Blender

NEW & IN STOCK- Paul O. Abbe, Model RB-375 Ribbon Blender.In -Stock . 375 Cubic Foot working capacity. 441 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 67.7" wide x 157.5" long x 78.8" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 75 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 20 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 5.5" wide x 27.6" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 36.2" long. Approximately 4" discharge height. Approximate weight 20,944 pounds. Approximate overall dimensions: 91.9" wide x 237.1" long x 104.7" high. Controls are available upon request.

MFR: Paul O Abbe

Used – 3,800 Gallon Stainless Steel Vertical Storage Tank – 316 SS, Flat Top, Di

Used- Stainless Steel Vertical Storage Tank, Approximately 3800 Gallon Capacity, 316 Stainless Steel. Flat top, Dish bottom. Approximately 94" diameter x 128" straight side. Openings Top" (3) 2" 23" x 23" manway with cover. 2" Center bottom outlet, approximate 9" discharge height. Mounted on (4) Carbon steel legs.

Unused GF Corporation MDL-050CM Micro Mist Spray Dryer – 3 kg/h Stainless Steel Lab Spray Drying System (2021)

Unused GF Corporation Micro Mist Spray Dryer, Model MDL-050CM. Stainless steel construction with 3 kg/hour (6.6 lbs/hour) evaporation capacity at 200 C (392 F) inlet and 60 C (140 F) outlet temperatures. Approx. 39" diameter x 40" straight side drying chamber with four-fluid nozzle, co-current airflow, cyclone and filter bag collection, 50 ml/min liquid feed pump, touch screen controls, and 5 kW heater. 3 phase, 200V electrical. Built 2021. Possible applications include spray drying liquid solutions and suspensions into fine powders for food, pharmaceutical, chemical, ceramic, and specialty material applications

Used AMK Double Arm Mixer VIU Strength Class IV – 1500L Capacity, 316SS, 135HP, Tilt Discharge, Built 2005

Used- AMK Double Arm Mixer, Type VIU-Strength Class IV. 316 (V4A) Stainless Steel on product contact parts. Max working capacity 396.8 gallon (1500 liter). Z-blades. Double jacketed bowl and not rated vacuum. Working temp 68-392 deg F (20-200 deg C). Hydraulic tilt discharge mechanism. top cover. Mounted on carbon steel support frame. New year 2005. Previous used in a pigment application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: AMK

Used Kurimoto Double Arm Sigma Blade Mixer | 1500L (396.8 Gal) | 304 SS | Jacketed | EPS Application

Used Kurimoto Double Arm Sigma Blade Mixer | 1500L (396.8 Gal) | 304 SS | Jacketed | EPS Application. 304 (V2A-1.4301) Stainless Steel on product contact parts. Working capacity 396.8 gallon (1500 liter). 304 stainless steel jacket bowl with counterweights. Sigma style blades. Last used in an EPS (super absorption) application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Kurimoto Osaka

Heavy-Duty 1500L Kurimoto Sigma Blade Mixer – 304 SS, Jacketed, Double Arm Kneader

Heavy-Duty 1500L Kurimoto Sigma Blade Mixer 304 SS, Jacketed, Double Arm Kneader. 304 (V2A-1.4301) Stainless Steel on product contact parts. Working capacity 396.8 gallon (1500 liter). 304 stainless steel jacket bowl with counterweights. Sigma style blades. Last used in an EPS (super absorption) application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Kurimoto Osaka

3M-Matic 800af Adjustable Box Sealer | 28 Cases per Minute Performance

Used 3M-Matic Model 800af adjustable top only case sealer, Type 39600, capable of speeds up to 28 cases per minute, depending on application. Handles cases from 6" to 30" long x 4.75" to 21.5" wide x 4.75" to 24.5" high, with case weights ranging from 5 lbs to 85 lbs. Serial number 3447. Electrical requirements are 115 Volt, single phase, 60 Hz, 3.8 Amp. Possible applications include automatic top sealing of shipping cases and cartons containing packaged products weighing from 5 lbs to 85 lbs.

MFR: 3M

Used 3M-Matic 8000A Adjustable Case Sealer – AccuGlide Taping Head, 40 CPM (2019)

Used 3M-Matic Model 8000A Adjustable Case Sealer with AccuGlide Taping Head. Rated for up to 40 cases per minute. 4.25" to 27.75" (108mm - 704.9mm) max box height, 4.5" to 21.5" (114.3mm - 546.1mm) max box width. 6" to Unlimited box length. 2" Tape head. Side Belt drive system. Uniform Box Types. 1ph/60Hz/120V requirements. Type: 11500 Serial# 21946 M, built 2019. Overall dimensions 70" x 43" x 65"T.

MFR: 3M

Rosenmund 4 Square Meter Nutsche Filter, Model RPD4-388-86

Used- Rosenmund 4 Square Meter Nutsche Filter, Model RPD4-388-86. Bottom discharge; 904L stainless steel shell, 316 stainless steel jacket; Shell rated 75 psi/FV at 397 degrees F; Half pipe jacket rated 100 psi/FV at 392 degrees F; Base rated 150 psi/FV at 370 degrees F; 10 hp main drive; hydraulic pack; Serial # F69653-1185-1; National Board # 17935; Built 1986 (Rebuilt since).

MFR: Rosenmund

Used Scott Turbon DP-5-HYD Planetary Mixer – 4 Gal, Vacuum Capable, Dual Can System

Used- Scott Turbon Planetary Mixer, Model DP-5-HYD. 4 Gallon stainless steel mixing can, designed for mixing under vacuum. Vacuum hood is fitted with 2 approximately 2" sight/charge ports. First of 2 mixing cans is jacketed with a flat bottom and bottom outlet with a tri-clamp style end cap closure. The second mix can is not jacketed and has a cone bottom with a center bottom outlet with a tri-clamp end cap closure. Includes a car with foot activated hydraulic jack for mix can exchange. Also include 208 volt controls with raise and lower buttons. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Scott Turbon

Used Shortening Extrusion System – Block Feed, Waukesha 064 PD Pump – Twin Feed

Used- Block Shortening Extrusion & Pumping System, Stainless Steel. Block ram feed hopper, approximate 17" x 13". Approximate 4" diameter x 36" long horizontal twin feed screws. Driven by 1hp, 3/60/230/460 volt, 1700 rpm gear motor. Feeds into Waukesha positive displacement pump, model 064. Control panel with (2) Allen Bradley VFD's. Mounted on stainless frame with casters. 3/60/480 Volt. No MFG tag.

Used Stokes 51 station model 551-1 rotary tablet press. This is a double rotary high speed tablet compressing machine. Tablet press has a 4 ton compression force, a 7/16" maximum tablet diameter, and...

Used-Stokes 51 station model 551-1 rotary tablet press. This is a double rotary high speed tablet compressing machine. Tablet press has a 4 ton compression force, a 7/16" maximum tablet diameter, and a 11/16" maximum depth of fill. The press is rated 1250 up to 3750 tablets/minute. Driven by a 3 hp 1800 rpm motor. Requires 220/440 vac 3 phase electrical supply. Includes its control panel. This unit was reconditioned in 2015 and then used in a product development lab. Very good condition.

MFR: Stokes