Cosmetics Equipment

Used R.A. Jones Aerofill 1695 Ultraflex 18-Head Rotary Gasser Shaker

Used R.A. Jones (Aerofill) Model 1695 Ultraflex Automatic 18-Head Rotary TTV Gasser Shaker With 275 Can Per Minute Capacity. High-speed multi-head aerosol gassing and shaking system designed for introducing and promoting the absorption of carbon dioxide (CO2) or nitrous oxide (N2O) into compatible products within aerosol containers. Capable of processing up to 275 cans per minute, depending on application, product characteristics and container size. Features (18) rotary processing heads with mechanical container agitation to enhance gas absorption during the gassing process, using either pressurized gas or equilibrium-based operation. Accommodates containers ranging from 1-3/8" to 3" (3576.2 mm) in diameter and 5" to 10" in height, including spray tip stem. Currently configured for containers measuring 2-1/8" internal diameter x 5-1/4" high. Equipped with a 3-1/2" wide x 107" long conveyor, Allen-Bradley CompactLogix L24ER programmable logic controller (PLC) and Allen-Bradley PanelView Plus 700 human-machine interface (HMI). Includes a 5 HP motor rated for 230/460 volts, 3-phase, 60 Hz and a 10 HP hydraulic power pack. Main electrical requirements are 480 volts, 3-phase, 60 Hz. Previously used in a dairy beverage processing operation. Possible applications include high-speed CO2 and N2O gassing, mechanical agitation and gas absorption processing of compatible dairy-based beverages, cream products, whipped dairy formulations, aerosol food products and other suitable gas-charged liquid products packaged in compatible containers.

MFR: Aerofil

Used R.A Jones Aerofill 1695 Ultraflex | High-Speed Rotary Gasser Shaker

Used- R.A Jones (Aerofill) Model 1695 Ultraflex "Gasser Shaker" Rotary 18 Head TTV. Capable of speeds up to 275 cans per minute (depending on application). Container size range: 1-3/8" - 3" or 35mm - 76.2mm (diam) x 5" - 10" (height) including spray tip stem. Includes Allen Bradley CompactLogix L24ER PLC, A/B panelview plus 700 HMI. Conveyor 3-1/2" wide x 107" long. 5HP 3/60/230/460V. Has a 10HP Hydraulic power pack. 3/60/480V. Multi head gasser shaker for high speed product absorption within aerosol containers, using either carbon dioxide (CO2) or nitrous oxide (N2O). This may be accomplished via pressurized gas or via equilibrium. The absorption of the gas into the product is enhanced by mechanically agitating the container during the filling process. Currently set up for 2-1/8" internal diameter x 5-1/4" tall. Previously used in a dairy beverage processing operation. Possible applications include high-speed CO2 and N2O gassing, mechanical agitation and gas absorption processing of compatible dairy-based beverages, cream products, whipped dairy formulations, aerosol food products and other suitable gas-charged liquid products packaged in compatible containers.

MFR: Aerofil

R.A Jones (Aerofill) Model 1695 | 18-Head Rotary TTV Gasser Shaker

Used- (Aerofill) R.A Jones Model 1695 Ultraflex Rotary 18 Head TTV "Gasser Shaker". Capable of speeds up to 275 cans per minute (depending on application). Container size range: 1-3/8" - 3" or 35mm - 76.2mm (diam) x 5" - 10" (height) including spray tip stem. Includes Allen Bradley CompactLogix L24ER PLC, A/B panelview plus 700 HMI. Conveyor 3-1/2" wide x 107" long. 5HP 3/60/230/460V. Has a 10HP Hydraulic power pack. 3/60/480V. Multi head gasser shaker for high speed product absorption within aerosol containers, using either carbon dioxide (CO2) or nitrous oxide (N2O). This may be accomplished via pressurized gas or via equilibrium. The absorption of the gas into the product is enhanced by mechanically agitating the container during the filling process. Currently set up for 2-1/8" internal diameter x 5-1/4" tall. Previously used in a dairy beverage processing operation. Possible applications include high-speed CO2 and N2O gassing, mechanical agitation and gas absorption processing of compatible dairy-based beverages, cream products, whipped dairy formulations, aerosol food products and other suitable gas-charged liquid products packaged in compatible containers.

MFR: Aerofil

Used Aesus Delta Chuckcap Automatic Single Chuck Capper – 60 CPM

Used- Aesus Model Delta Chuckcap Automatic Single Chuck Capper. Capable of speeds up to 60 containers per minute. Has intermittent motion carton indexing with two station tightener (1 pre-spin station, 1 final torqueing station). Cap size range: 0" to 5" diameter x 0" to 1" thick (with changeparts). Bottle size range: 0" to 10" diameter x 0" to 12" tall. Allen Bradley Mircologix 1400 PLC, A/B Panelview Plus 600 HMI, Panasonic servo drives. Pneumatic height adjustment. Includes cap sorting elevator (oversized), for flat caps up to 5" diameter. Last used in nutritional supplement packaging operation. 1/60/208 Volt.

MFR: Aesus

Buy Unused Aesus Premier Shrink Sleeve Applicator — 150 CPM Capability

Unused- Aesus Continuous Motion Full Body Shrink Labeler, Model Premier Shrink. Capable of up to 150 CPM. Size range from 1-1/8" diameter up to 4.9" (198mm) diameter. Maximum lay flat 200mm. 5" Inside diameter sleeve roll core. 16" Outside diameter sleeve reel holder. Conveyor belt 4" wide. Allen Bradley Micrologix 1400 PLC, A/B panelview plus 7 HMI, Panasonic servo drive. End of film sensor, photo registration. Dual rotating sleeve applicator. Includes Aseus Deltaveyor 4" wide x 22' long, serial# 881760623. 3/60/208-240 Volt, 13 Amp. Serial# 889970523.

MFR: Aesus

Buy Used Aesus Model Delta Cap-4 Inline Spindle Capper – Up to 120 BPM

Used Aesus Model Delta Cap-4 Automatic Inline Spindle Capper. Capable of speeds up to 120 bottles per minute, depending on bottle and cap configuration. Equipped with 4 pairs of easy-adjust cap tightening stations, 4-1/2" wide conveyor, cap sorting elevator, indexing wheel, and dual-sided belts for container control. Cap size range is 13mm to 93mm, with an approximate container height range of 2" to 14". Controls include an HMI with Omron Sysmac CJ1M CPU11 PLC. Machine features a motorized height-adjustable stand and is currently set up for 35.75mm caps. Electrical requirements are 1 phase, 60 Hz, 208V.

MFR: Aesus

Used AFM TS-CH100-V1B Stainless Steel Tamper Evident Neckbander – Up to 120 Containers Per Minute

Used AFM TS-CH100-V1B Stainless Steel Tamper Evident Neckbander Up to 120 Containers Per Minute. Bander is rated for speeds from 20-120 containers per minute (depending on application). Has film requirements of: 5mm to .07mm (thickness) with a layflat of 40mm-150mm and a cut length of 20mm-50mm. Has stepper motor controls and butterfly mandrel. Set up for unregistered clear film. Built 2016. 1/60/220V.

Used 2021 AFM SL-LX150-V2B Shrink Sleeve Labeling Line – Up to 300 Containers/Min with Codi Depalletizer, Steam Tunnel & Repalletizing System

Used- AFM Shrink Sleeving Line with Codi Manufacturing Depalletizer. Line of a Codi Depalletizing/Accumulation empty can feeder: AFM Model SL-LX150-V2B shrink sleeve applicator (rated 50-300 containers/minute); Speeds: up to 300 bottles per minute, application dependent. Film width range:1.58" - 9.45" (width) x 1.58" - 9.45 (cut length). Film thickness range:.0014" - .027". Reimers Model RH-60 electric steam boiler (10 lbs/hour maximum designed steam capacity); Taizhou Jiangyan Model JYEE GS90 2K Steam tunnel w/ conveyor; Codi Depalletizer (10' L x 2' W); Codi Repalletizer conveyor system w/ pallet tank (approx. 13' L x 9' W); (2) Eoslift adjustable hydraulic fork stackers (2,200 lbs load capacity, 63" maximum lift height); Controls. Built 2021.

AJAX A200 Series Boiler for Sale – 50 HP, 90% Thermal Efficiency – 2,000,000 BTU

Used AJAX Natural Gas Boiler, Atlas A200 Series, Model: Atlas A200. Heating Surface: 42.4 sq. ft. Maximum Input: 2,000,000 BTU/hr, Output: 1,800,000 BTU/hr. Thermal Efficiency: 90%, Burner Output: 1,307,692 BTU/hr, Horsepower: 50 HP, Gross Input Pressure: 4.0" W.C. Max Allowable Working Pressure (MAWP): 160 PSIG. Honeywell Sola Hydronic control, Honeywell HMI. Voltage: 120V, 60Hz, 1 Phase, Full Load Amps: 5A, Control Voltage: 24V. Serial# 71628.

MFR: Ajax

Used All-Fill 350E Powder Auger Filler – Stainless Contact Parts with Dual Auger Tooling

Used- All-Fill Powder Auger Filler, Model 350E. Has stainless steel contact parts and is mounted on painted carbon stand. Includes (2) sets of auger tooling. Built 2023. Has top-mounted drive. 3/60/220V. 7 amp.

MFR: All Fill

Used All-Fill B-300 Semi-Automatic Auger Filler – 120 CPM

Used- All Fill Semi-Automatic Auger Filler, Model B-300. Cycling speeds up to 120 per minute. Fill range from milligrams to 50 lbs. 15 Gallon 304 stainless steel agitated hopper, approximate 22" diameter x 21-1/2" deep. Tooling driven by a 1-1/2hp, 3/60/230/460 volt, 1140 rpm motor. Cerebus II computer controller. Has level detector. Serial # 22472.

MFR: All Fill

Inline Auger Filler with Pin Indexing – All-Fill SHA-400 + Quincy Air System

Used- All Fill Model SHA-400 Automatic Inline Auger Filler. Has a Cerebus III Auger Filler with pin indexing system. Includes a Quincy 25HP screw driven air compressor (Model No. QMB25ACA21C) With dryer. Last used for Seasonings.

MFR: All Fill