Cosmetics Equipment

Used AFM ET-ES-200XL-V2B Electric Heat Shrink Tunnel – 12kW, 400°F, 59" Chamber

Used AFM ET-ES-200XL-V2B Electric Heat Shrink Tunnel 12kW. 9.8"W x 59"L x 13.8"T (250mm x 1500mm x 350mm T) Tunnel Dimensions. 400 degrees F operating Temp. 12kw 3/50/60Hz 240volt requirements. Serial# 22N107051800306. Built 2018. Overall dimensions 71" x 35" x 70"T.

MFR: American Film & Machinery

Used Model AFM ET-ES-200XL-V2B Electric Industrial Heat Shrink Tunnel

Used Model AFM ET-ES-200XL-V2B Electric Industrial Heat Shrink Tunnel. 9.8"W x 59"L x 13.8"T (250mm x 1500mm x 350mm T) Tunnel Dimensions. 400 degrees F operating Temp. 12kw, 3/50/60Hz, 240volt requirements. Serial# 22N107051800302. Built 2018. Overall dimensions 71" x 35" x 70"T.

MFR: American Film & Machinery

Used American Process Screw Conveyor – 90" Long, 8" Auger, 2HP Gear Motor

Used- American Process Model S009-5434/SCH*09 Screw Conveyor, 304 Stainless Steel. Top infeed 20" x 10", bottom discharge 10" x 10". 90" long x 10" wide x 10" deep trough with a 90" long x 8" diameter screw, driven by 2hp, 3/60/230/460 volt, 1120 rpm gear motor. Clamp on covers.

American Process Systems Model S009-5434 Screw Conveyor – 8" Diameter Auger

Used- American Process Systems Screw Conveyor, Model S009-5434/SCH*09, 304 Stainless Steel. Top infeed 20" x 10", bottom discharge 10" x 10". 90" long x 10" wide x 10" deep trough with a 90" long x 8" diameter screw, driven by 2hp, 3/60/230/460 volt, 1140 rpm gear motor. Clamp on covers. 1/60/230 Volt.

Used Ames MFG Bartelt IM10-11 Pouching Machine – Stand-Up Delta Bottom Zipper Bag Packaging System

Used Ames MFG Bartelt IM10-11 Pouching Machine Stand-Up Delta Bottom Zipper Bag Packaging System. Has standard unwind and Zipper attachment , delta bottom seal , zipper crush sealers to modern feed roller, 10" center with 11 stations . Single carrier clips Extra high, Vacuum bag openers. ElectroCam controller with Direct Logic 06 PLC . Light Curtain guard . 3/60/208V power - 45 Amps. Approx Dimension - 54W x 260Lx 72H. No filler currently on machine.

Used Taylor Hobson 142-201 Ultra Autocollimator – 2-Axis | 0.001 Sec Read | SM2003 Software | Tripod & Reflector

Used- Taylor Hobson (Ametek) 2-Axis Photo Electric 142-201 Ultra Autocollimator. 0.2 sec (over central 800 sec) accuracy; 1800 sec range of measurement; 0.001 sec direct reading to. This two axis autocollimator is designed with a nominal range of 1800 seconds of arc, reading to 0.001sec., incorporating a solid state infrared LED light source and digital camera detector, and for the accurate measurement of small angular displacements. This autocollimator is used to measure: Angle (indexing head accuracy); Straightness (machine tool slides in two axes); Squareness (column to slideways); Parallelism (slideways). Includes SM2003 REV 2.9 Software; 50mm mounted flat reflector; adjustable tripod stand and plate for top of tripod.

MFR: Ametek

Used AMS A100 Semi-Automatic Auger Filler Stainless Steel Powder Filling Machine

Used AMS Model A100 Semi-Automatic Single Head Auger Filler. Capable of speeds up to 120 containers per minute (depending on application). Fill range: 100mg - 50lbs with change parts. All 304 stainless steel contact parts. Control panel has A/B controller with readout and start, e-stop and run / reset controls. Mounted on painted stand alone base with foot pedal control. Tooling required per application. Serial # A-100600. Voltage Motor: 330V / 3-Phase / 60H. Voltage Controls: 110V / 1-Phase / 60Hz. Built 1996. Approximate OAD 50" 88" 89" 585#.

MFR: AMS

Amsler Triblock Rinser/Filler/Capper Bottle Filling Line for Bottled Water & Soft Drinks

Used-Amsler Equipment Bottle Filling Line: Consists of Amsler Triblock Rinser/Filler Capper for Bottled Water or other Soft Drinks. Includes inline bottle drying system, Pack Leader inline labeler, Video Jet Date Coder, multipack shrink bundler and automatic stretch wrapper. Includes upstream systems 2) Inline UV Water cleaning system 3) Inline Oxygen and Nitrogen Generator 4) Inline Ozone Generator. 5) Inline Reverse Osmosis System. 6) 5 Holding Tanks Each has capacity of 4,500 Litres - Total 22,500 Litres 7) Inline Live Water analysis system that tracks pH, TDS, and a number of other metrics.

MFR: Amsler

Used Angelus 29P Rotary Double Can Seamer – Up to 200 CPM

Used- Angelus 29P Rotary Double Can Seamer, Model 29P MSLF. Capable of up to 200 cans per minute. Currently set on 301 dia. Can diameter size range: 2-1/8" to 4-1/4". Can height size range: 1-1/2" to 5-1/2". Wormscrew infeed, approximately 27-1/2" long. Approximate 3-1/4" wide conveyor. Serial# 3117741. 3/60/230 Volt.

MFR: Angelus

Used Apex C-500 Automatic Rotary Plastic Tube Labeler & Printer – Up to 150 Tubes/Minute with UV Curing

Used- Apex Model C-500 Automatic Rotary Plastic Tube Labeler and Printer. Capable of speeds up to 150 tubes per minute (depending on application). Tube size range: .175" - 6" or 4.45mm - 152.4mm (Diameter) x .25" - 6.00" or 6.35mm - 152.4mm (Length). Max Copy length: 3.00" or 76.2mm. Has Hoppman Bowl feeder and Fusion UV Model I6B S/N 20212. Last used in dental products.

MFR: Apex

Used APM MSA-26SS Semi-Automatic Shrink Bundler with Heat Tunnel

Used- APM Semi-Automatic Shrink Bundler, Model MSA-26SS. Set up for a 90-degree product infeed; 27.5" wide intermittent motion cross seal bar, with 6" long x 14" wide product hold down; 96" long x 24" wide x 37" tall stainless steel wire belt for heat tunnel; 48" long, aperture 28" wide x 13.5" tall stainless steel heat tunnel; Allen Bradley PanelView Plus 1250 touchscreen control; Ambient cooling fan after heat tunnel; Film rolls stand for top and bottom; 30" wide film feed rollers; Digital heat controls for tunnel and seal bar; Manual controls include cycle start, cycle stop, manual close, and e-stops; Light tree function indicator. Heavy duty SS tubular frame, on legs; 3/60/240V.

MFR: APM

Used APM MIC-26 Automatic Inline Shrink Bundler with Shrink Tunnel – Up to 30 Bundles Per Minute

Used- American Packaging Machinery (APM) Model MIC-26 Inline Shrink Bundler With Shrink Tunnel. Capable of production speeds up to 30 bundles per minute. Unit features a straight product infeed and approximately 1/2" wide x 27" long seal bar with knife cutoff. Shrink tunnel has an approximate 20" wide x 17" tall opening with wire belt conveyor. Equipped with control panel featuring Allen-Bradley L32E PLC, Allen-Bradley PanelView Plus 700 HMI, and (2) Allen-Bradley PowerFlex 4 drives. Electrical requirements are 480 volt, 3 phase, 60 Hz, 46.25 amps. Designed for automatic inline shrink bundling, the MIC-26 combines film sealing and heat shrinking into a continuous packaging operation. Serial # 652. Possible applications include shrink bundling and multipacking bottles, cans, containers, trays, food products, beverages, water, juice, dairy products, condiments, oils, and other packaged consumer or industrial products.

MFR: APM