Contract Pharmaceutical Equipment
Stock No.:
54687119Used Walker Ribbon Blender For sale100 gallon working capacity Walker per plate, 170 cu.ft. total capacity, model blender, serial # 1450, Material of constr1uction 316 stainless steel. The ribbon is ...
Used Walker Ribbon Blender For sale100 gallon working capacity Walker per plate, 170 cu.ft. total capacity, model blender, serial # 1450, Material of constr1uction 316 stainless steel. The ribbon is 24" diameter at the bottom of cone. Unit is driven by hydraulic drive. Unit is 60" wide x 48" straight side x 84" long. Unit is 80" over all height. Unit stands on six stainless steel legs. End nozzles are two 1-1/2" tri-clamp fitting. Bottom nozzle is one 6" tri clamp fitting. Previously used for food production (salsa).
MFR: Walker
Stock No.:
53458008Brew Tank, Model WP-30BBL. 30 BBL Capacity
Used- Brew Tank, Model WP-30BBL. 30 BBL Capacity, approximately 1700 gallons capacity. 304 Stainless Steel. Approximately 82" diameter x 66" straight side. Dished Top, Slight Cone Bottom. Openings Top: 20" manway, 4", 3", Side: 1-1/2", 1", (2) 1-1/2" side bottom, 2" center bottom outlet, with 9" discharge height. Mounted on (4) stainless steel legs. Serial# WP-498-30BBL.
Stock No.:
54687121Used D.E. Co. 1,720 gallon vertical stainless steel tank. National Board # 893. Serial # 6609. Internal pressure rating of 250 psi and full vacuum. Jacket has been cut into to add internal nozzle. ...
Used-D.E. Co. 1,720 gallon vertical stainless steel tank. National Board # 893. Serial # 6609. Internal pressure rating of 250 psi and full vacuum. Jacket has been cut into to add internal nozzle. Tank has a 68" diameter and 88" straight side height with 16" dish bottom and 16" dome top. Overall dimensions with legs and jacket are 72" diameter x 144" tall. Top has a 20" manway, a 7.5" center flanged fitting. (3) 3" flanged fittings, (5) 2" sanitary fittings and a 12" flanged fitting. Bottom has 2" threaded fitting for jacket and a 2.5" center sanitary fitting. Side has a 2" threaded fitting for jacket. Built 1966. Good condition as a pressure tank only.
Stock No.:
54298001Used Yamato Spray Dryer Model DL-41 – Lab-Scale Fine Particle Spray Dryer
Used Yamato Model DL-41 Laboratory Spray Dryer is a compact, laboratory-scale spray drying system designed for the production of fine powders from liquid samples in research, product development, and pilot-scale applications. This versatile unit is capable of producing fine granules with particle sizes ranging from approximately 40 to 100 microns, while offering a maximum water evaporation capacity of approximately 3,000 mL per hour for efficient drying performance. The system features an adjustable operating temperature range from 40 to 300 degrees C (104 to 572 degrees F) and accommodates liquid feed rates of up to 80 mL per minute, providing excellent process flexibility for a wide variety of formulations. The unit is equipped with a two-fluid atomizing nozzle incorporating a 0.7 mm orifice for consistent atomization and uniform particle production. The spray dryer includes an approximately 17-3/4" diameter x 39" high glass drying chamber, allowing clear visual observation of the drying process, along with a 3-1/2" diameter x 6" straight-side cyclone separator and a 3-3/4" diameter x 9-3/4" straight-side collection jar for efficient powder recovery. The electrically heated system operates on 220 Volt power and is mounted on casters for convenient mobility within laboratory or pilot plant environments. Designed for laboratory-scale drying of solutions, suspensions, and extracts, the Yamato DL-41 is ideally suited for research and development as well as pilot-scale work in the pharmaceutical, nutraceutical, food ingredient, chemical, biotechnology, and plant extract industries. It is an excellent choice for producing uniform fine powders in the 40 to 100 micron range with repeatable, controlled processing. Serial # B0400003.
MFR: Yamato
Stock No.:
54110001Used Gulf Coast Exchanger Shell & Tube Heat Exchanger | 1733 Sq. Ft. | 300 PSI | U-Tube | 2017
Used Gulf Coast Exchanger Shell & Tube Heat Exchanger | 1733 Sq. Ft. | 300 PSI | U-Tube | 2017; SA-789 U-tube construction; SA-516-70 shell construction. 300 psig shell side design pressure; Full vacuum pressure; 390 psig shell side test pressure; 500 degrees F shell side design temp.; -20 degrees F shell MDMT; 1 pass shell side. 300 psig tube side design pressure; Full vacuum pressure; 390 psig tube side test pressure; 500 degrees F tube side design temp.; -20 degrees F MDMT; 2 pass tube side. (306) U-tubes .75" OD x approx. 13'3" straight length. OAD: 35.25" D x approx. 215.5" L. SN 824114, NB #103. Built 2017.
MFR: Gulf Coast Environmental
Stock No.:
52049004Installed But Unused Southern Heat Exchanger Model 29-144-E-STC Reboiler 1,761 Sq. Ft. Carbon Steel Shell & Tube Heat Exchanger
Installed but unused Southern Heat Exchanger Model 29-144-E-STC Reboiler vertical shell and tube heat exchanger with 1,761 sq. ft. of heat transfer surface area and carbon steel construction. Carbon steel shell is rated for 413 pounds per square inch/full vacuum at -20 to 650 degrees F. Equipped with (789) carbon steel 3/4" O.D. x 12' long x 12-gauge tubes rated for 610 pounds per square inch/full vacuum at -20 to 650 degrees F. Features (2) 8" shell-side openings and side lug mounting. Shell only, no heads included. Serial #8-00022, National Board #13099, built 2008. Overall dimensions approximately 202"L x 60"W x 60"T with a weight of approximately 18,200 lbs. Possible applications include industrial reboiling, process heating, vaporization and heat transfer service with suitable process fluids compatible with carbon steel construction.
MFR: Southern Heat Exchanger
Stock No.:
53926001Unused SINO XMZ50/870 Hydraulic Filter Press – 50m² Solid-Liquid Separation System. Gold Mining Leach Plant.
Unused SINO Filter Press, Model XMZ50/870, hydraulic plate and frame filter press used for solid-liquid separation in industries such as palm oil processing, mining, metallurgy, and wastewater treatment. (38) Polypropylene filter plates measuring 870 mm / 34.35" each, with a total filtration area of 50 square meters / 1766 cuft and a filtration volume of 748 liters. Operating at a pressure of 0.6 MPa, the unit is made of carbon steel and includes a hydraulic closing mechanism and cake discharge system. Its dimensions are 4110 mm (L) 1400 mm (W) 1230 mm (H), and it weighs approximately 3456 kg. S/n N/A. Year 2020. Gold Mining Leach Plant.
Stock No.:
53926002SINO XMZ50/870 Plate & Frame Filter Press for Palm Oil, Mining, & Wastewater
Unused SINO Hydraulic Filter Press, Model XMZ50/870. Hydraulic plate and frame filter press used for solid-liquid separation in industries such as palm oil processing, mining, metallurgy, and wastewater treatment. (38) Polypropylene filter plates measuring 870 mm / 34.35" each, with a total filtration area of 50 square meters / 1766 cuft and a filtration volume of 748 liters. Operating at a pressure of 0.6 MPa, the unit is made of carbon steel and includes a hydraulic closing mechanism and cake discharge system. Its dimensions are 4110 mm (L) 1400 mm (W) 1230 mm (H), and it weighs approximately 3456 kg. S/n 230114FP08. Year 2020.
Stock No.:
539260032020 SINO XMZ50/870 Filter Press – 50m², 748L, Hydraulic Plate & Frame System
Unused SINO Model XMZ50/870 Filter Press. Hydraulic plate and frame filter press used for solid-liquid separation in industries such as palm oil processing, mining, metallurgy, and wastewater treatment. (38) Polypropylene filter plates measuring 870 mm / 34.35" each, with a total filtration area of 50 square meters / 1766 cuft and a filtration volume of 748 liters. Operating at a pressure of 0.6 MPa, the unit is made of carbon steel and includes a hydraulic closing mechanism and cake discharge system. Its dimensions are 4110 mm (L) 1400 mm (W) 1230 mm (H), and it weighs approximately 3456 kg. S/n 230114FP06. Year 2020.
Stock No.:
539260042020 SINO XMZ50/870 Hydraulic Filter Press – 50m² | 748L | 1766 CuFt Capacity
Unused SINO 1766 Cubic Foot Filter Press, Model XMZ50/870. Hydraulic plate and frame filter press used for solid-liquid separation in industries such as palm oil processing, mining, metallurgy, and wastewater treatment. (38) Polypropylene filter plates measuring 870 mm / 34.35" each, with a total filtration area of 50 square meters / 1766 cuft and a filtration volume of 748 liters. Operating at a pressure of 0.6 MPa, the unit is made of carbon steel and includes a hydraulic closing mechanism and cake discharge system. Its dimensions are 4110 mm (L) 1400 mm (W) 1230 mm (H), and it weighs approximately 3456 kg. S/n 230114FP09. Year 2020.
Stock No.:
43567014Used De Dietrich 670L Glass-Lined Reactor – 177 Gallon, 3008 Glass, Horizontal
Used- De Dietrich Glass Lined Reactor, 670 Liter (177 Gallon), 3008 Glass, Horizontal. Approximate 28 diameter x 60 straight side. Dished ends, (1) removable. Internal rated -1 to 6 bar (-14.5 to 87 psi) at -10 to 200 degrees C. (14 to 392 F.), carbon steel jacket rated 6/8 bar (87 to 116 psi) at -10 to 200 degrees C. (14 to 392 F.). Openings top (3) 4, 10. 2 End bottom outlet. Mounted on removable wood saddles with a carbon steel cart with casters. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: De Dietrich
