Contract Pharmaceutical Equipment
Stock No.:
46431001Used Alfa Laval Aldec-404 Stainless Steel Solid Bowl Decanter Centrifuge
Used Alfa Laval Model Aldec-404 Solid Bowl Decanter Centrifuge With 316 Stainless Steel Product Contact Surfaces, 4,000 RPM Maximum Bowl Speed And 22 kW Main Drive. Industrial horizontal solid bowl decanter centrifuge designed for continuous solid-liquid separation, sludge dewatering, slurry clarification, solids concentration and recovery of suspended solids from compatible industrial process streams. Features 316 stainless steel product-contact construction with a maximum bowl operating speed of 4,000 RPM for centrifugal separation of suspended solids from liquid materials. Equipped with a 110 mm (4.33") single-lead internal screw conveyor with welded hardfacing for increased wear resistance during continuous solids transport and discharge. Includes a single row of lined cake discharge ports for removal of separated solids and moon-style liquid plate dams for controlling liquid discharge level and separation conditions. Fitted with a 2.5 kNm torque-rated gearbox with a 159:1 reduction ratio, a 22 kW (approximately 29.5 HP) main drive motor requiring 380 volts, 3-phase, 50 Hz electrical service, and a DC backdrive motor for controlling differential speed between the rotating bowl and internal screw conveyor. Includes supporting base, casing and feed pipe for product introduction into the centrifuge. Manufactured by Alfa Laval, Model Aldec-404. Possible applications include municipal and industrial wastewater treatment, biological sludge dewatering, chemical slurry separation, suspended solids recovery, industrial effluent clarification, food processing wastewater treatment, mineral slurry dewatering, pigment processing and concentration of other compatible solids-bearing liquid streams.
MFR: Alfa Laval
Stock No.:
47200002Used Alfa Laval AVNX-616B-31G Stainless Steel Solid Bowl Decanter Centrifuge
Used Alfa Laval Model AVNX-616B-31G Solid Bowl Decanter Centrifuge With 316 Stainless Steel Product Contact Surfaces, 3,250 RPM Maximum Bowl Speed And 11 kW Main Drive. Industrial horizontal solid bowl decanter centrifuge designed for continuous solid-liquid separation, slurry clarification, solids concentration and mechanical dewatering of compatible industrial process materials. Features 316 stainless steel product-contact construction with a maximum bowl operating speed of 3,250 RPM for centrifugal separation of suspended solids from liquid process streams. Equipped with a single-lead internal screw conveyor featuring welded hardfacing for improved wear resistance during continuous solids transport and discharge. Includes moon-style liquid plate dams for controlling liquid pond depth and discharge conditions to optimize separation performance. Features a casing equipped with a cake vibrator to assist with discharged solids handling, along with a feed pipe for introducing process materials into the centrifuge. Equipped with a 2.5 kNm torque-rated gearbox and an 11 kW (approximately 14.8 HP) main drive motor requiring 380 volts, 3-phase, 50 Hz electrical service. Includes supporting base and centrifuge casing. Manufactured by Alfa Laval, Model AVNX-616B-31G. Possible applications include industrial wastewater treatment, municipal sludge dewatering, biological sludge thickening, chemical slurry separation, industrial effluent clarification, food processing wastewater treatment, mineral slurry dewatering, pigment processing and recovery of suspended solids from other compatible industrial liquid streams.
MFR: Alfa Laval
Stock No.:
52211001Alfa Laval NX-314 Solid Bowl Decanter Centrifuge
Used- Alfa Laval NX-314 Solid Bowl Decanter Centrifuge. Max bowl speed 3250 rpm, 316 stainless steel (product contact areas), base, casing, feed pipe, gearbox, main drive motor, safety guards, vibration switch, mounted on four leg stand.
MFR: Alfa Laval
Stock No.:
52345021Used Alfa Laval AVNX-418 Solid Bowl Decanter Centrifuge – 3250 RPM, 40 HP Motor
Used- Alfa Laval AVNX-418 Solid Bowl Decanter Centrifuge, 316 Stainless Steel (product contact areas). Max bowl speed 3250 rpm. Single row of lined cake discharge ports, moon liquid plate dams. Base, bowl diameter approximately 13.8" diameter x 57.4" long. Driven by a 40hp, 3/60/230/460 volt, 1770 rpm motor. Has XP on/off panel. Includes bottom discharge hopper, stainless steel holding tank ( 22" diameter x 45" straight side), Seepex pump, feed pipe, carbon steel frame.
MFR: Alfa Laval
Stock No.:
13652025Used PIERALISI FP600RS 2-Phase Solid-Liquid Decanter Centrifuge – 4000 RPM, 11 kW
Used PIERALISI FP600RS 2-Phase Solid-Liquid Decanter Centrifuge. Centrifugal Force: G 3157 at 4000 RPM Motor Power: 11 kW Overall Dimensions: Drum Diameter: 353 mm (13.9") Drum Length: 1228 mm (48.3") Length-to-Diameter Ratio: 3.29 Total Weight: Approximately 1350 kg Hydraulic Capacity: 9000 l/h (9 m/h) Actual Throughput: Dependent on the required separation level, but indicative values are: 50 tons/day of tallow 10001200 kg/h of olives 6000 l/h of sludge Optional: Complete supply of 1 new electrical panel with PLC, Siemens touchscreen. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Pieralisi
Stock No.:
11059255Used US Filter Pressure Leaf Filter – Auto Jet (1300 Sq. Ft.)
Used US Filter Pressure Leaf Filter Auto Jet (1300 Sq. Ft.). MAWP 150/FV at 400 deg.F. MDMT -20 deg.F at 150 PSI. Shell is 4'6" diameter x 15' long. Inlet (2) 3", outlet 6", spray header 3", drain 10". Material 316 Stainless Steel. No elements. Requires 48" filter elements.
MFR: US Filter
Stock No.:
53147075Used JV Northwest 1,300-Gallon Single-Wall Tank – 316 Stainless Steel
Used- JV Northwest Single-Wall Tank, 1,300-gallon. Constructed of 316 stainless steel. 78" diameter x 60" straight side; flat top, dish bottom design; Bottom head includes a 2" diameter center bottom outlet; Top ports include (1) 2" diameter tri-clamp fitting; Tank is mounted on (4) stainless steel legs and includes a bridge mount for agitation or other top-mounted equipment; Shell Thickness: 2.3mm/0.090 inches. Previously used in cosmetics applications.
MFR: JV Northwest
Stock No.:
49747007Used – 50 Ton Horizontal Liquid Carbonic CO2 Tank – Bulk Cryogenic Storage
Used 50 Ton Horizontal Liquid Carbonic CO2 Tank Bulk Cryogenic Storage. SA-516-70 Shell & Heads. 78" diameter x 598" Straight Side. MAWP: 360psi at -20 to 650 degrees F. 15" diameter manway. Product: Carbon Dioxide. National Board# 4230, Serial# 59980, Built 1978.
MFR: Liquid Carbonics
Stock No.:
10151559Used Winkworth ZX500-6 Z-Blade Mixer-Extruder | 500L Working | Vacuum Lid | Jacketed | 304 SS | With Tool Temp Units
Used Winkworth ZX500-6 Z-Blade Mixer/Extruder | 500L Working | Vacuum Lid | Jacketed | 304 SS | With Tool Temp Units. 500 liter (132Gal) working capacity with a 778 liter total capacity (product dependent). 304 stainless steel chamber measures approx. 1,090mm long x 956mm wide x 735mm deep. Unit has vacuum rated domed hood/lid. 304 stainless steel external jacket. Each Z-blade driven by 30kw (40hp) motor/gearbox. Stainless steel screw discharge driven by 22kw motor/gearbox. Unit includes control panel. Includes (1) used Tool Temp model TT-14500 H and (1) Used Tool Temp model TT-508 X heater/cooling units. Also includes (3) Hydac oil coolers mounted on common frame. Unit has main control unit and local operator controls. Motors are dual rated 50/60 Hz. Blade Bowl Clearance Straight side 3mm , End 4mm. Cooling Jacket Design Pressure Min Atmos Max 3.5 bar.G Design Temp Min 10C Max 250C Test Pressure 6.7 bar.G Design & Manufacturing Code SEP (Sound Engineering Practise). Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Winkworth
Stock No.:
54687125Used New Brunswick Scientific Co. 500L(132 gallon) capacity Stainless Steel Tank. National Board #566. Diameter is 28” with a 40” straight side with jacket on the lower 31". Vessel- Max Allowable W...
Used-New Brunswick Scientific Co. 500L(132 gallon) capacity Stainless Steel Tank. National Board #566. Diameter is 28” with a 40” straight side with jacket on the lower 31". Vessel- Max Allowable Working Pressure 40PSIG/O PSIA. Jacket-Max Allowable Working Pressure 35 PSIG. Vessel- Max Temp. 300°F. Jacket- Max Temp. 300°F. Vessel- Hydrotest 80 PSIG. Jacket- Hydrotest 100 PSIG. The top has an 18”RFSO with blind flange with a 1” agitator shaft(no motor included) , one 2- ¼” threaded sanitary fitting, one 1-¾” sightglass, one- 3/8” plug, one ¼” plug, one- ¾” plug and a Ametek MNG DIV. Pressure Gauge. The neck has one- ¾” threaded coupling, one- 1” threaded coupling, and two- ¼” couplings with plugs. The top portion has two- 2” 150lb. Pad flanges, one -1” 150lb. Pad flange, five- 1” couplings with fittings and two- 1” sanitary threaded couplings. The jacketed portion has two- 1” threaded couplings and one- ¾” threaded coupling. Below the jacket is three- 1” couplings with fittings, two- 1’ sanitary fittings, and one- ¾” sanitary fitting. The bottom has one- 1” center drain valve, one- 2” 150lb. Pad flange, one- 1” threaded coupling and one- ¾” threaded coupling. The unit sits on four carbon steel legs and has an agitator bracket. Built 1982. Sits on four carbon steel legs. Overall Size is 84” x 52”.
MFR: New Brunswick Scientific
Stock No.:
54687126Used 500 liter (132 gallon) New Brunswick Scientific Co. Chemical Reactor. 304 SS jacket and 316L SS construction. National Board # 567. Has 28" diameter, 44" straight sidewith jacket on the lower 31...
Used 500 liter (132 gallon) New Brunswick Scientific Co. Chemical Reactor. 304 SS jacket and 316L SS construction. National Board # 567. Has 28" diameter, 44" straight sidewith jacket on the lower 31". Unit's vessel max allowable pressure 40 PSIG and max temperature is 300 F. Unit's Jacket max allowable pressure 35 PSIG and max temperature 300F. Hydrotest pressure is rated 80 PSIG on vessel and 100 PSIG on jacket. Top has n 18”RFSO with blind flange with a 1” agitator shaft(no motor included) , one 2- ¼” threaded sanitary fitting, one 1-¾” sightglass, one- 3/8” plug, one ¼” plug, one- ¾” plug and a Ametek MNG DIV. Pressure Gauge. The neck has one- ¾” threaded coupling, one- 1” threaded coupling, and two- ¼” couplings with plugs. The top portion has two- 2” 150lb. Pad flanges, one -1” 150lb. Pad flange, five- 1” couplings with fittings and two- 1” sanitary threaded couplings. The jacketed portion has two- 1” threaded couplings and one- ¾” threaded coupling. Below the jacket is three- 1” couplings with fittings, two- 1’ sanitary fittings, and one- ¾” sanitary fitting. The bottom has one- 1” center drain valve, one- 2” 150lb. Pad flange, one- 1” threaded coupling and one- ¾” threaded coupling.. Unit Stand on (4) 30" steel legs. Overall dimensions: 32" x33" x 82" h.
MFR: New Brunswick Scientific
Stock No.:
54686001Unused T&C Stainless 5,000 Liter 316L Sanitary Jacketed Reactor
Unused T&C Stainless 5,000 Liter 316L Stainless Steel Jacketed ASME Sanitary Reactor With Metenova ZG9 Magnetic Mixer. Vessel has a 5,000 liter working capacity and approximately 6,326.1 liter total volume, with a 72" internal diameter x 72" straight side. Constructed of 316/316L stainless steel with 3/8" shell and heads. Vessel is rated for 45 psi from -20 to 350 F and 15 psi vacuum. 316/316L stainless steel dimple heat-transfer surface is rated for 150 psi from -20 to 350 F and includes 1-1/2" inlet and outlet connections. Product-contact surfaces are mechanically polished and electropolished to 15 Ra, with approximately 35 Ra exterior finish. Vessel is insulated with 2" insulation and stainless steel sheathing. Equipped with bottom-mounted Metenova ZG9 magnetic mixer with RPM sensor and stainless steel IP66 IE3 drive, 4" ASEPCO TF40-100-2 flush-mounted pneumatic diaphragm outlet valve with USP Class VI EPDM diaphragm, (3) 3" sprayballs rated 38 GPM at 25 psi, vortex breaker, thermowell, sight/light connection, GWR, conductivity, pH and sample connections, 4" product-supply and retentate-return connections, and multiple additional sanitary process connections. Three-leg-supported vessel is constructed to ASME Section VIII, Division 1. Overall height is approximately 165-5/16" with an empty weight of approximately 5,294 lb. Drawing available. Possible applications include sanitary mixing, blending, holding and temperature-controlled processing of compatible pharmaceutical, biopharmaceutical, food, beverage, cosmetic, personal-care and sanitary chemical products.
MFR: T&C
